What is the method to reset the maintenance light on Dongfeng Citroen C4L?

1 Answers
LoganLynn
07/29/25 6:25pm
The method to reset the maintenance light on Dongfeng Citroen C4L is: 1. Turn off the ignition switch of the C4L; 2. Press the maintenance mileage reset button; 3. Turn on the ignition switch, and the odometer display will start counting down; 4. When 00000 is displayed, release the button, and the maintenance indicator light will turn off. The Citroen C4L is a model under Dongfeng Motor Corporation, with exterior dimensions of 4675mm in length, 1780mm in width, and 1500mm in height, a wheelbase of 2710mm, a body weight ranging from 1372kg to 1435kg, and braking system featuring front ventilated discs and rear disc brakes.
Was this review help?
11
3
Share
More Forum Discussions

How to Close the Trunk?

The trunk can be opened or closed using electric or remote control methods. To close the trunk, simply press the close button on the trunk or the close button inside the car. You can also use the remote key to close it.
10
3
Share

How to Install the Jianghuai Engine Belt?

Loosen the generator fixing screw and the belt tension adjustment screw. Push the engine closer to make the distance between the pulleys the shortest, then place the belt on and align it. Adjust the belt tension to the appropriate level and tighten the engine fixing screw and adjustment screw.
19
0
Share

What are the steps for disassembling and assembling the center armrest box of a Toyota Prado?

The vehicle should be in the ignition-off state, and the gear lever must be placed in P or N position. Then, forcefully rotate the gear lever head counterclockwise to remove it. Next, lift the box horizontally backward and upward, and forcefully pull out the connections at the back. There are three interfaces at the front and two at the back. After disconnecting all the wires, the entire box can be lifted horizontally out of the vehicle. Turn the box upside down to remove any obstructions. Reassemble in the reverse order.
9
2
Share

How to Remove Engine Oil Stains from Shoes?

Apply a mixture of dish soap and toothpaste, gently scrub with a toothbrush, wipe off the foam with a cloth after scrubbing, and let the shoes dry in a cool place. Mix baking soda powder with cold water to form a thick paste, apply it, let it sit for 30 minutes, and remove the baking soda powder after it has completely dried. Chop soap into small pieces and dissolve it in boiling water, then scrub the shoes in the soapy water, rinse thoroughly with clean water after scrubbing.
8
2
Share

How to Start a Motorcycle with 4 Wires?

Theoretically, a motorcycle ignition system can operate normally with just 4 wires: one for power, one for ground, one for the positive terminal of the ignition coil, and one for the trigger positive. The red wire connects to the main power line, and the black wire connects to the main line of the electrical components. The black-and-white wire connects to the ignition kill switch line, and the green wire connects to the ground (negative) line.
12
4
Share

How to Connect Bluetooth to Play Music in Land Cruiser?

First, establish a pairing relationship by enabling the Bluetooth functions on both your phone and the navigation device, and set the phone's Bluetooth to 'visible to all' in the settings. Then, search for Bluetooth devices on your phone, select the device once found, and proceed with pairing and connection. Once paired, the connection is successful. After the navigation device and phone are successfully paired via Bluetooth, enter the Bluetooth interface, click on 'Music', and open the music player on your phone simultaneously.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.