What is the method to reset the maintenance light on a Mercedes-Benz E200?

1 Answers
HoldenDella
07/30/25 8:35am
Mercedes-Benz E200 maintenance light reset method operation steps are as follows: 1. Press the selection button on the right side of the multifunction steering wheel. 2. Find the settings on the instrument panel, select the ASSYST option, choose the complete maintenance, and confirm the complete maintenance. 3. Select the oil grade 229.5, and finally click "Confirm" to complete the reset of the vehicle maintenance light. The Mercedes-Benz E200 is a four-door, five-seater sedan with a fuel tank capacity of 66 liters. The vehicle is positioned as a mid-to-large-size car, and the currently available model is the 2021 version, equipped with 1.5 and 2.0-liter turbocharged engines.
Was this review help?
18
5
Share
More Forum Discussions

What engine does the Haval H6 use?

Haval H6 1.5T engine model: GW4G15B, Haval H6 2.0T engine model: GW4C20B. Here are the relevant introductions: 1. H6 1.5T engine: The GW4G15B 1.5T engine in the Haval H6 is independently developed by Great Wall, based on the GW4G15 with a turbocharging system installed, and is a high-power version of the GW4G15T. In addition to adopting continuous variable valve timing (dual VVT) technology, it also uses an aluminum cylinder block, dual overhead camshafts, direct ignition technology, front intake design, polymer intake manifold, electronic throttle, and other technologies, making it a well-balanced engine. However, the 1.5T engine in the Haval H6 lacks direct injection technology and has insufficient low-end torque output, requiring 2200 rpm to reach the maximum torque of 210Nm, resulting in relatively weak power performance. 2. 2.0T engine: The 2020 2.0T model is equipped with the GW4C20B engine, an electronically controlled twin-scroll turbocharged engine featuring direct injection, electronic twin-channel turbocharging, thermal management module, integrated cylinder head exhaust manifold, and other technologies. The new electronic control system has higher fuel injector pressure, better gasoline dilution and atomization effects, improving combustion efficiency and thoroughness; the electronically controlled twin-scroll turbocharging allows for high torque output at lower RPMs. The Haval H6 2.0T engine suffers from turbo lag and poor matching with the transmission. There are vibration and noise issues at idle, the low-power version has average power performance, and the engine noise is loud during rapid acceleration, which is a common issue with domestic car engines.
15
4
Share

What are the causes of new tire slippage?

The causes of new tire slippage are as follows: 1. Tire wear: The surface of car tires has tread patterns to enhance grip. Over long-term driving, the tread patterns gradually wear out due to friction with the ground. Severe wear can significantly reduce the tire's grip, leading to slippage, delayed braking, and other issues. 2. Tire groove blockage: The tread patterns on car tires have numerous grooves to increase friction with the ground. If these grooves are blocked by sand, stones, or other debris, it can also cause tire slippage. 3. Abnormal tire pressure: Tires have a standard pressure value. If the tire pressure becomes abnormal—for example, if it is too high—it reduces the contact area between the tire and the ground, which is another factor contributing to tire slippage.
3
1
Share

What are the possible reasons for the gasoline pump not working in Wuling Sunshine?

Poor line contact, relay failure leading to easy fuse burnout, or a faulty fuel pump, or obstructed fuel lines. More relevant information is as follows: 1. Introduction: Wuling Sunshine is a minivan independently developed by Liuzhou Wuling, leveraging the advanced management expertise of SAIC Group and General Motors, combined with Wuling's extensive experience in minivan manufacturing, in collaboration with Hunan University. It meets international safety and environmental standards with high technology and quality. 2. Design: The new protruding front-end design, along with various safety features, ensures that Wuling Sunshine complies with national safety collision regulations even without airbags. The new 6360 minivan offers safer driving, an attractive and spacious appearance, and is economical and practical with ample interior space.
1
2
Share

Should the Clutch Release Bearing Be Replaced if It Makes Abnormal Noises?

Yes, it needs to be replaced. Failure to replace it in a timely manner can lead to the fracture of the pressure plate diaphragm spring, resulting in clutch failure and the inability to perform gear shifting operations, which can affect safety while driving. Below is relevant information about the clutch: 1. Function of the Clutch: The clutch is a component that ensures smooth starting and seamless gear shifting of the vehicle. It is located within the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver depresses or releases the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transmitting power from the engine to the transmission. 2. Clutch Operating Mechanism: The clutch operating mechanism includes components such as the clutch pedal, release rod, release fork, adjusting fork, release sleeve, release bearing, release lever, and return spring. It typically comes in two basic forms: mechanical operating mechanisms and hydraulic operating mechanisms. In some large vehicles, to make clutch operation easier and more effortless, assistance devices are added to the mechanical or hydraulic operating mechanisms, forming pneumatic-assisted mechanical systems.
10
5
Share

Where is the air conditioning switch for the Haval H6?

Owners of the Great Wall Haval H6 can find the A/C switch on the center console. The A/C button controls the air conditioning compressor. Pressing this button activates the compressor to start cooling. When using the heater, the A/C switch should be turned off. The Haval H6 is equipped with an AUTO automatic air conditioning system, and next to the AUTO button, there is a round knob for manual temperature adjustment. Functions of the car air conditioning system: 1. Temperature regulation: The air conditioning system adjusts the temperature, humidity, and ventilation inside the car according to the external environment, maintaining the most comfortable driving conditions. 2. Ventilation: The limited space inside the car cabin or driver's compartment means that if it is completely sealed, the oxygen inside will be quickly depleted, and the air will become increasingly stale, which is harmful to the health of the occupants. Therefore, ventilation is essential. The simplest method is to open the windows to replace stale air with fresh air. Additionally, most cars are equipped with ventilation devices. 3. Defogging: In winter, when temperatures are low, the interior of the car can become too warm, leading to numb hands and reduced operational flexibility. Moreover, fog tends to form on the windows, impairing visibility and compromising driving safety. The best solution is to use the air conditioning system, which utilizes the heat from the engine coolant to warm the air and then circulates it into the cabin, ensuring optimal room temperature, effectively removing fog, and enhancing driving safety. 4. Cooling: In summer, when the car is exposed to sunlight, the interior temperature can rise above 60°C. Even with natural ventilation while driving, the temperature can remain around 40°C. The car air conditioning system primarily provides the driver with a safe and comfortable driving environment, unaffected by external temperatures, ensuring the health and safety of the owner.
6
4
Share

What Causes Car Shaking After Driving Through Water Without Stalling?

High-voltage wires getting damp can lead to abnormal power supply to the spark plugs, causing engine misfire and resulting in shaking. Once the high-voltage wires dry out and power supply returns to normal, the engine will operate normally again. More extended information is as follows: 1. Inspection: Open the engine compartment cover, remove the air filter, and check for water ingress. If the air filter is dry, it indicates no water ingress, and the vehicle can be used with confidence. If the filter is wet, replace it and check the intake pipe for water ingress. If there is none, it means the engine hasn't taken in water, and the car is fine. 2. Slow Down or Stop to Observe: When encountering accumulated water while driving, if the water level exceeds two-thirds of the bumper or tire height, driving through it poses certain risks. Additionally, driving too fast through water can cause splashes to enter the cabin from the engine compartment or chassis. Always assess the water level; if it's high, try to detour and avoid forcing your way through.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.