What is the method to reset the maintenance light on a Honda vehicle?
4 Answers
Method to reset the maintenance light on a Honda vehicle: 1. Turn off the ignition switch and press the right button on the instrument panel. Turn on the ignition switch, and the display will show the "SERVICE" indicator. Press the left button on the instrument panel until the next maintenance mileage is displayed, then release. 2. Turn off the ignition switch, press the trip meter reset button on the combination meter, turn on the ignition switch, and release the trip meter. The display will show "service". 3. Within seconds, turn the adjustment button on the combination meter's clock to the left until "service, km" or "service" resets. The display will show: "service in 15000km" (15,000 km maintenance), then turn off the ignition switch.
Last time I helped my neighbor reset the maintenance light on his Honda Civic, and the method was actually quite simple. First, turn off the car completely, then press and hold the TRIP button on the dashboard without releasing it. Next, turn the key to the ON position to power up the instrument panel. At this point, you'll see the maintenance light start flashing—keep holding the button for about ten seconds until the light goes off. However, the button location varies by model; for example, the CR-V might require using the DISP button on the steering wheel. It's advisable to confirm the correct button for your specific model before operating to avoid accidentally affecting other functions. If the light remains on after several attempts, it could indicate a system malfunction or that maintenance is genuinely due—in such cases, it's best to visit a dealership for inspection. Remember, resetting the maintenance light only clears the reminder; you still need to change the oil on schedule.
I drive an older Accord, and here's how I reset the maintenance light: After the car is completely turned off, locate the SELECT/RESET button on the left side of the dashboard. Press and hold it, then turn the key to the ignition-on position. When the wrench icon on the dashboard starts flashing, release the button immediately, then press and hold it again until the indicator light disappears. Newer models might be simpler—for example, the latest Fit can reset it directly through the infotainment screen's maintenance settings. Procedures vary by model year, so it's best to check the manual before attempting. Once reset successfully, that annoying yellow light will be gone, but if it stays on afterward, it might indicate that it's time for actual part replacements based on the maintenance schedule.
Resetting the Honda maintenance light typically involves three steps: Hold the reset button with the engine off, turn the key to the ON position without starting the engine, and wait for the wrench light to flash before proceeding. For example, in the Odyssey, press the INFO button on the steering wheel and step on the brake to power on, while the 10th-generation Civic requires pressing both buttons on the instrument panel simultaneously. The key is to wait for the indicator light to flash before releasing—acting too quickly may cause failure. Do not start the engine during the operation, and some models may require repeating the process several times. Check the glove box for the manual, which includes detailed step-by-step diagrams for your specific model.
