What is the method to reset the maintenance light on a Ford Mondeo?
3 Answers
Ford Mondeo maintenance light reset method: 1. Press the one-touch start button to power on the vehicle; 2. Find the "Oil Life" interface on the instrument panel screen. When the vehicle requires maintenance, the system will prompt "Change Oil Soon"; 3. Then press and hold the "OK" button on the steering wheel for more than five seconds to reset the oil life to 100%; 4. Complete the reset. The Ford Mondeo is a mid-size sedan under the Ford Motor Company, with body dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. In terms of appearance, the Mondeo's grille has been changed to a mesh design, and chrome trim has been added to the taillights to enhance both texture and a sporty feel.
I'm a Ford Mondeo owner, driving a 2017 hybrid model, and just performed the maintenance light reset last week. The method is quite simple: First, turn off the engine and rotate the key to the OFF position; then press and hold the Trip Reset button on the left side of the steering wheel without releasing it; next, turn the key to the ACC position (dashboard lights up but do not start the engine); keep holding the button for about 5-10 seconds until the maintenance indicator light flashes and disappears before releasing. During this entire process, avoid shifting gears, and the car door can remain open. After resetting, the system will automatically calculate the next maintenance interval, which is quite convenient. I often share this method in car enthusiast forums. For beginners, I recommend first checking the vehicle manual or watching a YouTube demonstration. If the light doesn't reset, check if the button is stuck or if the battery voltage is low; otherwise, seek professional assistance.
I've worked on many Ford models at the repair shop, including resetting the maintenance light for the Mondeo, which can actually be done as a DIY. The usual steps are: After turning off the engine, immediately press and hold the Trip button on the dashboard; turn the key to the ON position but do not press the accelerator to start; continue holding for 10-15 seconds until the maintenance reminder light goes off. The essence of resetting is to clear the ECU maintenance counter to avoid false alarms. Once completed, the system will start recording mileage from zero. If it fails midway, try restarting the car or check if the button is worn out. Regular resetting ensures accurate reminders and improves vehicle maintenance efficiency.
