What is the method to reset the maintenance light on a Ford Escape?
3 Answers
Ford Escape maintenance light reset method: 1. Close all doors and windows; 2. Turn the ignition switch to position 2; 3. Simultaneously press and hold the accelerator and brake for about 3 seconds, the dashboard will display an interface, and you need to maintain this for 25 seconds; 4. After 25 seconds, the word "Complete" will appear, indicating that the maintenance light has been successfully reset. At this point, you can release the accelerator and brake. The maintenance light is an indicator of the car's maintenance cycle. When the maintenance light comes on, it means the vehicle has reached the mileage for maintenance. Although you can reset the maintenance light yourself, it is best to go to an authorized Ford service center for maintenance. Afterward, professionals will use a car computer diagnostic tool to reset the maintenance light.
Resetting the Ford Kuga maintenance light is actually a pretty common operation, and many car owners have done it themselves. First, park the car in a safe place with the engine off, insert the key but make sure it's turned to the off position. Locate the OK button or a similar function button on the dashboard, and hold it down with your right hand without releasing. With your other hand, turn the key to the ON position—that's the position where the electronics are powered but the engine isn't started. Keep holding the button for about 15 seconds while watching the dashboard; the maintenance reminder light will flash and then turn off or disappear. Once it stops blinking, release the button, turn off the key, and then turn it back on to confirm the light is off. If it doesn’t work, it might be due to slight variations in button location or steps for different model years—check the vehicle manual or video tutorials to sort it out. My car is a 2015 Kuga, and this method always works. The key point is that the maintenance light is a reminder to change the oil or perform maintenance, so after resetting, make sure to actually follow through with the service—don’t just reset it without doing the work. Regular maintenance helps prevent issues and keeps the car running longer, saving money and hassle in the long run.
Friend, the Ford Escape maintenance light issue you encountered is actually quite simple to resolve. Here's the straightforward method: Sit in the car with doors closed and locked, ensure the engine is off, then insert the key without starting the engine. Locate the circular OK button on the instrument panel near the steering wheel and press and hold it. Simultaneously, use your other hand to turn the key to the ON position (but don't start the engine). Maintain this position for about ten seconds - you'll notice the maintenance reminder fading or flashing before disappearing from the dashboard. Release the button, turn off the ignition, then restart to check if the light remains. If unsuccessful, don't worry; try repeating the process or consult Ford's official guidelines. DIY solutions save time and money, but always prioritize safety during operation. Remember, the maintenance light indicates needs like oil changes or brake inspections - never just reset it without addressing actual vehicle conditions. Regularly monitor engine sounds and fuel consumption during daily driving to detect minor issues early.
