What is the method to reset the maintenance light on a 2017 Corolla?

1 Answers
MadelynAnn
07/30/25 7:47am
17-year Corolla maintenance light reset method: 1. Turn the ignition switch to ON and then back to OFF. 2. Press and hold the reset button on the "Daily Mileage" display of the combination meter. 3. Turn the ignition switch to ON, at this time the maintenance light will first illuminate for 3 seconds, then flash for 2 seconds, and then light up for 1 second before turning off. 4. Release the reset button, the reset is complete. 5. Turn the ignition switch to OFF. The following is related information about the 2017 Corolla: 1. As a compact car launched by Toyota in the domestic market, the Corolla has achieved very good sales thanks to Toyota's brand reputation and years of user word-of-mouth. 2. The 2017 Corolla's onboard computer is equipped with a maintenance reminder function. Based on preset mileage or engine operating time, a maintenance prompt will appear on the instrument panel when due, or it may be accompanied by a prompt sound.
Was this review help?
15
4
Share
More Forum Discussions

What is the impact of a faulty ABS on braking?

A faulty ABS can affect the anti-lock braking function of the car, which does not have a significant impact on driving but does influence the braking system to some extent. For example, during emergency braking, the system cannot prevent wheel lock-up, posing a significant safety hazard. Below is an introduction to the car's braking system: 1. The car's braking system: The braking system consists of a control system, hydraulic system, and power assist system. The car relies on the braking system to stop when driving on the road. The braking system generates friction between the brake pads and the wheel hub or disc, converting the kinetic energy of the moving car into heat energy during the friction process. 2. Brake pump: The brake pump is an important component of the hydraulic system. It can be divided into the master brake pump and the wheel brake pump, serving as a crucial part of the hydraulic braking system. When the piston inside the cylinder is acted upon by the push rod of the brake pedal, the brake fluid in the cylinder is transmitted to the wheel cylinders of each tire through the brake pump.
13
0
Share

What is the top speed of the BYD Yuan Pro?

According to the manufacturer's vehicle data, the top speed of the BYD Yuan Pro ranges between 165 to 180 kilometers per hour. The actual speed may vary due to various influencing factors. mph stands for miles per hour, commonly referred to as "miles" in car speed terminology, where 1 mile = 1.609344 kilometers per hour. Here is more information about mph: 1. Introduction: Miles per hour (mph) is a unit of speed measurement, indicating miles per hour. It is commonly used in the UK and Commonwealth countries for calculating speed limits on roads, tennis serve speeds, and also for measuring the central wind speed of tropical cyclones. 2. China's measurement unit: km is currently the measurement unit used in China, while mph is colloquially known as "miles." Due to the late start of China's automotive industry, in the early days of the country's founding, miles per hour was mostly used as the counting unit for speed and mileage meters.
19
2
Share

What brand is the gitisynergy tire?

gitisynergy tire is a series product under Giti Tire (Giti). The gitisynergy tire adopts an environmentally friendly high-performance formula and curved contour design, helping to reduce carbon dioxide emissions during vehicle operation while providing superior driving and dry/wet braking performance. The gitisynergyE1 tire was developed and designed by Giti's German team and underwent tens of thousands of kilometers of outdoor road tests at the UK's MIRA, Spain's Idiada, and Germany's ATP test tracks, continuously adjusting and optimizing tire performance during the tests. Giti Tire maintains long-term strategic cooperation with numerous internationally renowned automobile manufacturers due to its outstanding brand, products, services, and technological advantages.
2
0
Share

Will driving over the line in a tunnel be captured by cameras?

Generally, there are traffic violation cameras in tunnels, but not all tunnels have them. Therefore, driving over the line in a tunnel may not necessarily be captured. According to road traffic laws, crossing the line in a tunnel is considered a violation of traffic markings. If caught by electronic surveillance, it will result in a fine and a deduction of 3 points from the driver's license. However, if you have to change lanes to avoid an accident ahead or to give way to emergency vehicles, it will not be considered a violation. Even if you are penalized, you can appeal the decision through administrative reconsideration. Below are some precautions for driving in and out of tunnels: 1. Slow down and turn on lights before entering the tunnel: During daytime driving, the light inside the tunnel will suddenly become dim, making it difficult for the human eye to adapt quickly. Therefore, you should reduce speed, increase following distance, and turn on your headlights before entering the tunnel. Most tunnels have clear speed limit signs, so follow the posted speed limits. 2. Maintain a safe following distance: Due to the significant difference in light when entering a tunnel, visibility may be temporarily impaired, causing drivers to instinctively brake. The vehicle behind may also be affected by the sudden change in light, so maintaining a greater distance ensures safety. Generally, keep a distance of at least 100 meters when driving in a tunnel. For longer tunnels, follow the posted guidelines for safe following distances. 3. Do not change lanes: Visibility is poor inside tunnels, especially near exits, and there are usually only two or three lanes. Therefore, lane changes are strictly prohibited in tunnels. Stay in your lane and avoid overtaking.
15
1
Share

Where is the engine number of the Volkswagen Santana?

The engine number of the Volkswagen Santana is located in the engine compartment, between the battery and the brake master cylinder. On the front of the engine, there is a small black block with three sets of numbers and letters. The 17-digit VIN code is the vehicle identification number, and the 11-digit one is the engine number. The Volkswagen Santana (SANTANA) is a sedan, a brand car produced by Volkswagen AG in California, USA. Its body dimensions are 4546mm in length, 1710mm in width, and 1427mm in height, with a wheelbase of 2458mm and a top speed of 165km/h.
10
0
Share

What series is the BMW G38?

BMW G38 is the new long-wheelbase version of the BMW 5 Series. This model is equipped with three engine options: a low-power 2.0-liter turbocharged engine with a maximum power output of 135kW and maximum torque of 290Nm; a high-power 2.0-liter turbocharged engine delivering 185kW and 350Nm; and a 3.0-liter inline six-cylinder turbocharged engine producing 250kW and 450Nm. The BMW G38 measures 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.