What is the method to reset the maintenance light for the 2021 Honda XR-V?

1 Answers
MacEmersyn
07/30/25 7:16am
Open the car door, turn off the ignition switch, then rotate the ignition switch to the "on" position to illuminate all indicator lights on the dashboard; Continue to hold down the reset button "A" until "..." appears on the display screen. Release the brake pedal and simultaneously let go of the "A" button. The maintenance reset operation is now complete, turn off the power. Start the vehicle and keep it running. Hold down the "TRIP" button on the dashboard until "OILLIFE" and the mileage start flashing, then you can release it.
Was this review help?
15
1
Share
More Forum Discussions

What Causes a Motorcycle to Stall Immediately After Starting?

Motorcycle stalling immediately after starting can be attributed to the following reasons: 1. Fuel depletion. When an automatic stall occurs during operation, the first thing to check is whether the fuel has run out. 2. Fuel supply failure. If the motorcycle stalls due to an interrupted fuel supply, you may notice a gradual loss of power before the stall occurs. 3. Engine overheating. Excessive engine temperature can lead to poor lubrication, causing the piston and cylinder to seize, resulting in engine shutdown. Signs of this type of stall include a gradual decrease in power followed by a sudden shutdown.
1
3
Share

How are vehicle license plates classified into ABC?

English letters merely indicate the vehicle's identity and the registration region. The letters represent prefecture-level city codes, with 'A' typically reserved for provincial capitals, while the remaining letters are allocated to other cities through varying classification methods. Some provinces assign letters based on the economic output of each prefecture-level city. Additional information: 1. The vehicle registration authority code consists of 2 characters, combining a Chinese character and an English letter. The Chinese character abbreviates the province, autonomous region, or municipality, while the English letter denotes the vehicle management office. 2. For car license plates, this code is centered at the top, with the Chinese character and English letter arranged horizontally. For motorcycle plates, it appears on the left side, arranged vertically. 3. The plate number consists of 6 characters, using Arabic numerals (0-9) or a combination of numerals and English letters (A-Z). 4. Car plate numbers follow a 3+3 structure, horizontally aligned with '●' and '━' as separators—'●' for front plates and '━' for rear plates.
16
4
Share

How long after the Subject 3 exam can you check the results?

Subject 3 exam results are issued on-site immediately after completion, and the score report will be printed in the background. Below are the relevant details about the Subject 3 exam: 1. The road driving skills test for Subject 3 generally includes: vehicle preparation, simulated lighting test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, etc. 2. The safety and civilized driving knowledge test for Subject 3 includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
10
1
Share

How to Adjust Brake Pedal Height?

Brake pedal height adjustment method: 1. Open the hood, locate the throttle cable wire on the side of the engine, pull it outward until reaching the highest point, then fully depress the accelerator pedal; 2. Remove the clip on the cable end, move the protective sleeve in the tightening direction, then secure it to raise the brake pedal, or reverse the process to lower it. Precautions for using the brake pedal: 1. During emergency braking, hold the steering wheel with both hands and avoid single-handed operation; 2. The free travel of the brake pedal directly affects braking time and distance; 3. Be swift when braking, release the brake pedal if the vehicle skids, but quickly turn the steering wheel when correcting.
15
1
Share

What are the reasons for no air coming out of the car air conditioner?

There are three common reasons for no air coming out of a car air conditioner: blower failure, air filter failure, and control system failure. The air from a car air conditioner is mainly introduced into the cabin by the blower, which circulates through the air ducts inside the car. The ducts are equipped with damper structures that regulate the airflow by controlling the blower's speed and the damper's opening. The specific reasons are as follows: 1. Clogged air filter. The most common reason for no air coming out of the air conditioner is a clogged air filter. Normally, outside air passes through the air filter before entering the car interior. The main function of the air filter is to block dust, particles, moisture, and other contaminants in the air. It also provides strong sterilization and deodorization effects, ensuring that passengers do not inhale harmful gases, which could threaten their health and driving safety. The air filter is usually installed above or below the blower. 2. Blower damage. The blower is a crucial part of the air conditioning system, as the cabin's air circulation relies on its operation. When using the air conditioner at high fan speeds, a buzzing sound can often be heard from under the front passenger seat. This is the sound of the blower working—the higher the airflow demand, the faster the blower must draw in air. If the blower is damaged, it may not draw in enough air or stop working entirely, resulting in no airflow from the air conditioner. 3. Damper, computer, or switch failure. If the above two reasons are ruled out and the air conditioner still does not produce airflow, the issue may lie with the damper, air conditioning computer, or control switch. These three scenarios are less common and harder to diagnose when they occur.
17
3
Share

What to Do If the First Maintenance Mileage Has Not Been Reached?

The first maintenance is determined by whichever comes first. If the time for the first maintenance arrives but the mileage hasn't been reached, then the time is the determining factor. Below are some key points to note for the first maintenance of a new car: 1. It is essential to change the engine oil and oil filter, and clean the air filter. 2. Check whether the coolant level in the car is within the normal range. 3. Inspect the car's brakes and undercarriage components for any scratches. 4. Verify that the power steering fluid level is normal and check all oil pipe connections for any signs of leakage. 5. Examine the condition of the generator, air conditioning, water pump, and belts for aging and tension. 6. Check the tire pressure and wear condition; if there is uneven wear, consider rotating the tires.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.