What is the method to reset the maintenance light for the 2019 Wey VV5?

[McAlan]

2019 Wey VV5 maintenance light reset method is: 1. Press the "Trip Reset" button on the dashboard, and the trip meter will be reset; 2. Continue to press the "Trip Reset" button for 60 seconds, at which point the dashboard display will show 5000 kilometers, and the maintenance light will be reset. Taking the 2019 1.5T Wey VV5 two-wheel-drive Pioneer as an example: it is a compact SUV launched by Great Wall Motors, with a length, width, and height of 4462mm, 1857mm, and 1638mm respectively, equipped with a 1.5T turbocharged engine, a maximum power of 124kw, a maximum torque of 285nm, and matched with a 7-speed dual-clutch transmission.

[JuliaFitz]

Last year, I helped a friend deal with the maintenance light issue on a 2019 Wey VV5, and the method was actually quite simple. First, park the car securely and turn off the engine. Then, without pressing the brake, press the one-touch start button twice or insert the key and turn it to the ACC position to illuminate the dashboard. Next, locate the round multifunction button on the lower left side of the steering wheel or the Trip button on the dashboard, hold it down for about 5 seconds until the setup menu appears. Use the button to scroll up and down to find the "Maintenance" or "Service" option, select it, and confirm to reset the reminder. Once done, turn off the key to exit. The key is to perform the operation while the car is parked and not to start the engine. The maintenance light reminder is essential for regular oil changes and maintenance, but if it's not reset in time, it can be quite annoying to keep flashing. In case of a false alarm, it might even cause unnecessary trouble. It's best to handle it during each maintenance service or check the manual to avoid any mishandling.

[VonRafael]

After the last maintenance on my 2019 VV5, the service light was still on, but I managed to reset it myself. Here's the specific process: Sit in the car with the doors closed, don't start the engine, just press the start button to enter ACC mode. On the left side of the steering wheel, there's a multifunction button—press it to enter the menu, select Vehicle Information, then find the Maintenance Reset option and confirm. The whole process takes just two or three minutes and is quite simple, but don't do it while driving as it can be distracting and dangerous. I think handling it myself saves the hassle of going to the 4S shop, and resetting the maintenance reminder after service helps track the next service interval. Remember to regularly check the tires and brakes—safety first. Paying attention to these details usually makes driving more reassuring.

[ODelaney]

As a 2019 VV5 owner, here's my quick method to reset the maintenance light: After turning off the engine, switch to ACC position. When the dashboard lights up, immediately press and hold the Trip button for 3 seconds to enter settings. Select maintenance reset and confirm - the light will disappear instantly. Simple and efficient. Remember not to perform this operation while driving, and don't neglect regular vehicle maintenance.