What is the method to reset the H2S maintenance light?
4 Answers
h2s maintenance light reset method is: 1. Insert the key; 2. Turn the key to the ON position, after turning on the power, press the odometer button on the dashboard for more than 15 seconds in idle state without releasing it; 3. Simultaneously press the brake and accelerator pedals, wait for the maintenance light to flash; 4. Release the brake and accelerator pedals. Car maintenance items: 1. Replace engine oil and oil filter; 2. Regularly clean the air filter; 3. Replace brake fluid, transmission oil, battery, throttle, fuel injector, brake pads. The H2S has a body length, width, and height of 4195mm, 1722mm, and 1638mm respectively, with a wheelbase of 2550mm, a fuel tank capacity of 45L, and a trunk capacity ranging from 260L to 960L.
As someone who frequently works on cars myself, I find the maintenance light reset procedure for the Haval H2S quite straightforward. After turning off the ignition switch, press and hold the reset button on the instrument panel, then turn the power to the ON position. You'll see a countdown prompt appear on the dashboard. Maintain the pressing state until the countdown ends, and the light will be successfully reset. Last time after completing a minor service, I used this method to clear the light and also checked the engine oil level. Remember to ensure the vehicle is parked on level ground and in the off state before performing the operation. Learning this skill can save you the time of queuing at the 4S shop, but for unfamiliar owners, it's recommended to check the manual to confirm the exact button position as there might be variations between different model years.
Over the years working at the repair shop, I've helped many customers with the maintenance light reset procedure for the Haval H2S. The key is to operate the reset button and ignition switch simultaneously: With the power off, press and hold the small button on the right side of the instrument panel while turning the key to the accessory position. The instrument panel will then display a countdown symbol. After about 10 seconds, release the button and the warning light will be reset. Remember not to press the brake pedal or start the engine during this operation. The most convenient time to perform this is right after maintenance service, otherwise driving with the warning light constantly on may lead to misdiagnosis. For owners who have modified their instrument panels later, pay attention to possible changes in the reset button location.
As a female car owner, I just reset the maintenance light on my H2S last week. First, make sure the car is completely turned off, then locate the small black dot (reset button) next to the odometer and press it firmly. Next, turn the key with your right hand to light up the dashboard without starting the engine, while keeping your left hand pressed on the button. Watch for a 10-second countdown to appear on the screen, and release the button once it finishes. The whole process takes about 20 seconds! It’s actually easier than I thought—I was initially intimidated by the wrench symbol. I recommend new owners ask the 4S dealership to demonstrate this during the first maintenance service, so you can do it yourself after every oil change.
