What is the method to remove cement slurry from a car?
2 Answers
To remove cement slurry from a car, follow these methods: 1. Wet and soak the cement slurry on the car with water, then slowly scrub with car wash liquid and a towel; 2. Apply white vinegar to the cement slurry area, wait for it to soften, then rinse with water; 3. Use a hair dryer to heat the part with cement slurry, as the difference in thermal expansion between the slurry and the car body can cause it to fall off automatically; 4. Apply gasoline to the cement slurry area, wait for it to soften, and then remove it directly. Precautions for removing cement slurry from a car: Do not use hard objects directly to avoid scratching the car. The harm of cement slurry to a car is: Prolonged presence on the car body can corrode the paint.
I remember that time when I parked next to a construction site, and cement slurry splashed onto my car. I was almost frantic. I immediately rinsed it with water—a high-pressure water gun works best, but you must act before the slurry dries. If it hardens, don’t rush to scrape it off, as that will scratch the paint. Instead, soak a soft cloth in white vinegar or lemon juice and apply it for five to ten minutes. The acidity will dissolve the cement, and you can then gently wipe it away. After treatment, make sure to rinse thoroughly, as any acidic residue can corrode the paint. I once didn’t act in time, and the cement stain left a permanent mark. To prevent this, try to avoid parking near construction sites, and keep some wet wipes in your car for emergencies. The key is not to use metal tools, or the repair costs will be even higher.
