What is the method to manually clear the ABS warning light?

How much damage does installing a rearview radar cause to the original car?

Installing a rearview radar can cause significant damage to the original car. Below is an introduction to precautions when reversing: Reversing method: Before reversing, first check the situation behind the car, estimate the path of movement, and ensure that the front of the car will not hit any obstacles. Try to avoid stepping on the accelerator when reversing, and control the speed to avoid going too fast. Depending on the direction the rear of the car needs to move, use the left hand to turn the steering wheel. If the rear needs to move to the right rear, turn the steering wheel to the right. Conversely, turn the steering wheel to the left. Precautions: During the reversing process, do not keep looking at the rear. While ensuring the safety behind the car, it is necessary to occasionally observe the left and right rearview mirrors, pay attention to the distance between obstacles and the car body, and accordingly use the steering wheel to adjust the position of the car while reversing. If you feel that the front of the car might hit an obstacle during reversing, you should also check the front of the car at the appropriate time.

5

2

Share

How to prevent stalling when starting on a slope?

The method to prevent stalling when starting on a slope is: First, lift your left foot (clutch pedal) slowly until the car begins to vibrate, then hold it steady. Gradually release the brake pedal. Once the front wheels start pulling the rear wheels, slowly release the clutch pedal completely. When preparing to start on a slope, after the engine starts, keep both the clutch and brake pedals depressed with your feet. Shift the gear into first, then release the handbrake. Gradually ease off the brake pedal with your right foot while monitoring the tachometer's RPM. When the tachometer shows around 2000 RPM and you hear a slight change in the engine sound, slowly release the clutch pedal with your left foot. Once you feel the car beginning to move, quickly release the brake pedal with your right foot while simultaneously fully releasing the clutch. Then, gently press the accelerator to give some gas, and the car will move up the slope.

12

0

Share

How to Deal with Abnormal Noises When the Baojun 730 Drives on Bumpy Roads?

Baojun 730 driving on bumpy roads with abnormal noises requires timely inspection at a 4S store. There are two main points to check: First, the fixing bolts between the steering drive shaft and the steering gear may be loose. The solution to the abnormal noise is simple—just tighten the bolts. Second, there may be an issue inside the steering gear. Due to poor external sealing of the steering gear, water may enter, causing rust and wear on internal components, leading to abnormal noises. In this case, the steering gear needs to be replaced, which takes about 1.5 to 2 hours. Advantages of the Baojun 730: High configuration in its class, simple and elegant exterior, perfect interior design, full of business vehicle flavor.

5

2

Share

Are hazard lights and high-low beam alternation the same?

Hazard lights and high-low beam alternation are not the same. Usage of hazard lights: When a vehicle breaks down or is involved in a traffic accident on the road, hazard lights should be turned on to warn other passing vehicles. When towing a malfunctioning vehicle, both the towing vehicle in front and the towed vehicle behind should simultaneously activate their hazard lights to alert other vehicles on the road to maintain distance and be aware of the presence of another vehicle behind. If driving on the road and needing to slow down due to vehicle malfunction or other factors, turn on the hazard lights to prompt other vehicles to detour or overtake. Usage of high-low beam alternation: High beams should be turned on in situations with poor lighting, such as on highways or rural roads. In well-lit conditions, as well as when encountering oncoming traffic, following another vehicle, or approaching pedestrians or non-motorized vehicles, switch to low beams. On urban roads with streetlights, flashing the lights may be necessary. When overtaking a large truck, because trucks have large blind spots and high chassis, repeated flashing is needed to alert the truck driver and ensure safety before overtaking.

19

1

Share

How much does the new Jetta SUV VS7 weigh?

The curb weight of the Jetta VS7 ranges from 1.5 tons to 1.7 tons. The Jetta VS7 is a mid-sized SUV. The curb weight of a vehicle refers to the gross weight of the car when it is fully equipped according to the factory's technical conditions, including all necessary fluids. This is an important design indicator for automobiles. Jetta VS7 powertrain: The Jetta VS7 is equipped with Volkswagen's 280TSI engine, paired with a 6AT transmission. It delivers a maximum horsepower of 150 and a maximum torque of 250. This efficient golden powertrain system provides ample power and smooth coordination, with very responsive acceleration. Jetta VS7 features: The Jetta VS7 is equipped with the ACC-3.0 third-generation advanced adaptive cruise control system. For those who frequently drive long distances, constantly adjusting speed, braking, and accelerating on the highway can be very tiring. The Jetta VS7 uses a radar hidden in the front bumper to determine the distance to the vehicle ahead, accelerating when the leading car speeds up and decelerating when it slows down.

1

3

Share

Why is the fuel gauge not displaying in the new Santana?

Abnormal fuel gauge display in cars is usually caused by a faulty fuel level sensor (fuel float). The fuel gauge detects the fuel level through the float, and if the detection signal is distorted, such issues can occur. Some fuel level displays are computer-controlled, and if the computer signal malfunctions, it may also lead to inaccurate display, although this probability is very low. How to read the car fuel gauge: Generally, there are two English letters on the fuel gauge: 'E' stands for empty, and 'F' stands for full. The fuel gauge contains two coils, located on the 'F' and 'E' sides respectively. The sensor is a variable resistor controlled by the float height. The change in resistance determines the strength of the magnetic field in the two coils, which in turn determines the direction of the pointer's deflection. Principle of the car fuel gauge: The fuel gauge mainly consists of two parts: a measurement unit and a display unit. The measurement unit measures the fuel level in the tank, while the display unit shows the fuel level on the gauge.

7

3

Share

What is the method to manually clear the ABS warning light?

How much damage does installing a rearview radar cause to the original car?

How to prevent stalling when starting on a slope?

How to Deal with Abnormal Noises When the Baojun 730 Drives on Bumpy Roads?

Are hazard lights and high-low beam alternation the same?

How much does the new Jetta SUV VS7 weigh?

Why is the fuel gauge not displaying in the new Santana?

Can the Engine Compartment of a Sedan Be Washed with Water?

Where is the fuel filler cap switch on the BMW 535?

Where is the black H license plate from?

What is the speed limit at railway crossings?