What is the method to forcibly open the Edge's trunk?

How to Clear the Maintenance Reminder for the 2015 Sagitar?

Method to clear the maintenance reminder for the 2015 Sagitar: 1. Turn off the ignition switch and shut off the engine; 2. Press and hold the right adjustment button on the instrument panel; 3. While keeping the right button pressed, turn on the ignition switch; 4. Release the right button and press the left menu button once to complete the process. The 2015 Sagitar is a compact car with exterior dimensions of 4655mm in length, 1780mm in width, and 1453mm in height, a wheelbase of 2651mm, and a minimum ground clearance of 113mm. It is equipped with a 1.6L naturally aspirated engine and paired with a 6-speed AT automatic manual transmission.

17

4

Share

What is the standard for gear backlash?

3ml~4ml. Below is relevant information about gear backlash: 1. Introduction: Gear backlash refers to the circumferential play of one gear when the other gear in a meshed pair is fixed, measured as arc length along the pitch circle. In rotary mechanism transmissions, the pinion is installed with the rotary bearing as a standard component whose tooth thickness cannot be altered. To meet heavy load requirements, the pinion's thickness cannot be reduced. 2. Design principle: To ensure proper lubricating oil film formation between tooth surfaces and prevent gear seizure caused by thermal expansion during operation, appropriate gear backlash must be maintained during meshing.

5

3

Share

Can Antifreeze Be Added Directly?

It is not recommended to add antifreeze directly. Before adding antifreeze to a car, the engine cooling system should be thoroughly cleaned, especially during seasonal transitions when the antifreeze level needs to be checked. If the antifreeze is insufficient, it should be replenished promptly. Cleaning before adding antifreeze is mainly to prevent chemical reactions between scale in the engine and the antifreeze, which could cause the scale to detach and affect the normal performance of the antifreeze. The car's cooling system is crucial as it primarily serves to dissipate heat from the engine and provide warm air for the air conditioning. Antifreeze generally needs to be replaced every two years. If a shortage is noticed before the two-year mark, you can top it up with the same color and brand of antifreeze, preferably into the reserve tank. If the reserve tank is empty, it is advisable to check for possible leaks.

9

4

Share

What is the Function of the Active Cruise Control System?

The function of the active cruise control system is to replace the driver in controlling the vehicle speed, avoiding frequent cancellation and setting of cruise control, making the cruise system suitable for more road conditions. The active cruise control system is similar to traditional cruise control, also known as the adaptive cruise control system. The system includes radar sensors, digital signal processors, and control modules. The driver sets the desired speed, and the system uses low-power radar or infrared beams to obtain the exact position of the vehicle ahead. If it detects that the vehicle ahead is slowing down or a new target is detected, the system sends an execution signal to the engine or braking system to reduce the speed, maintaining a safe driving distance between the vehicles. When there is no vehicle ahead, the system accelerates to restore the set speed, and the radar system automatically monitors the next target.

20

3

Share

What Can Be Put in an Engine That Won't Be Detected?

Putting salt in an engine is generally not easy to detect. Here is some relevant information about car engines: 1. Engine Function: The car engine is the device that provides power to the vehicle, acting as the heart of the car and determining its power, fuel efficiency, stability, and environmental friendliness. 2. Materials Used: Engine oil is a crucial material for the engine, containing various additives that effectively protect the engine's vital moving parts and ensure its normal operation. 3. Classification: Engines include internal combustion engines (reciprocating piston engines), external combustion engines (such as Stirling engines and steam engines), jet engines, electric motors, etc.

14

0

Share

Where to Install a Lost License Plate?

Vehicle Management Office. Below are the relevant requirements for installing a license plate: 1. License plate installation position: For most vehicle models, the installation position is centered at the front and rear, but special vehicle models may have different positions. For example, some off-road vehicles and special-structure trucks. According to national standards, in the direction of the vehicle's forward movement, the front license plate should be installed in the middle or right side of the front, and the rear license plate should be installed in the middle or left side of the rear. 2. Requirements for installing a license plate holder: The inner edge of the license plate frame should be more than 5mm away from the edge of the vehicle number characters. The white part of the license plate is considered part of the characters, which includes the white border of the license plate.

10

0

Share

What is the method to forcibly open the Edge's trunk?

How to Clear the Maintenance Reminder for the 2015 Sagitar?

What is the standard for gear backlash?

Can Antifreeze Be Added Directly?

What is the Function of the Active Cruise Control System?

What Can Be Put in an Engine That Won't Be Detected?

Where to Install a Lost License Plate?

How to Turn On and Off the Rear Wiper of a Volkswagen?

How to reset the tire pressure warning on a 2019 CR-V?

What does m3 mean?

What is the difference between 185 and 195 tires?