What is the method to eliminate the small wrench warning in the Arrizo 5?

What is the length of the BAIC Senova X25?

The BAIC Senova X25 has a length of 4110mm, with body dimensions of 1750mm in width and 1545mm in height, and a wheelbase of 2519mm. The BAIC Senova X25 is the first A0-class SUV under the Senova brand of Beijing Automotive, featuring a large panoramic sunroof, a 360-degree panoramic reverse camera, and a total of 12 color combinations for both interior and exterior. In terms of power, the Senova X25 is equipped with a 1.5-liter naturally aspirated engine across all variants, delivering a maximum horsepower of 116. For suspension, the front suspension is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension.

13

4

Share

What are the consequences of not changing transmission oil?

Consequences of not changing transmission oil: It will affect the performance of the car. During the use of the transmission, friction between metal components will generate debris and impurities. Over time, the transmission oil will become dirty, oil passages will become blocked, leading to rough gear shifting, poor transmission efficiency, weak acceleration, and to some extent, increased fuel consumption. The reduced effectiveness of transmission oil can easily cause poor lubrication, accelerated component wear, and corrosion of mechanical parts, thereby shortening the service life of the transmission. Transmission oil needs to be checked regularly and is generally replaced every 80,000 kilometers. Transmission oil serves to lubricate and clean the transmission, ensuring its normal operation.

9

1

Share

Is a 1.5L Car Engine Powerful Enough?

1.5L car engine power is definitely sufficient for daily commuting, as opportunities for high-speed driving are rare, and full-load situations are infrequent, especially considering speed limits on highways. However, if you frequently drive long distances on highways, engage in off-road work, or navigate mountainous terrains, a car with a slightly larger displacement would be more suitable. Below are methods for evaluating a car's power performance: 1. Maximum Speed: Maximum speed refers to the highest speed a fully loaded car can achieve on a good, level road surface (such as dry, flat, clean asphalt or concrete). It is measured under calm or no wind conditions, with the accelerator pedal fully pressed, and the car passing a 200-meter test section at the highest possible speed. 2. Maximum Climbing Gradient: Maximum climbing gradient refers to the steepest slope a fully loaded car can overcome in first gear on a good road surface, representing the car's climbing ability. This parameter is particularly important for SUVs and off-road vehicles. 3. Acceleration Performance: Acceleration performance is often evaluated by acceleration time. It refers to the time required for a fully loaded car to accelerate from a standstill to a predetermined distance or speed (usually 80% of the maximum speed) by shifting to the highest gear with maximum acceleration intensity. This indicates the car's ability to quickly reach high-speed driving. 4. Braking Ability: Good braking performance is essential for safe driving and is a prerequisite for fully utilizing a car's capabilities. The braking ability of a car is evaluated not only by braking time, deceleration rate, and braking distance but also depends on the car's speed during braking, tire conditions, and road surface conditions.

2

0

Share

How to Determine the Quality of Shock Absorbers?

Shock absorber performance can be evaluated based on four aspects: temperature inspection, oil leakage observation, ride feel, and individual testing. Shock absorbers are vulnerable components during vehicle use, and their quality directly affects the driving smoothness and the lifespan of other mechanical parts. Therefore, it is essential to keep shock absorbers in good working condition. Below are detailed methods for evaluation: 1. Temperature Inspection: After driving the vehicle for 10 kilometers on rough road conditions, stop and touch the shock absorber housing. If it is not sufficiently hot, it indicates that there is no internal resistance, meaning the shock absorber is not functioning. 2. Oil Leakage Observation: During operation, high-temperature oil vapor from the shock absorber often adheres to the cylinder wall, and road dust accumulates on it, forming a layer of sludge. This is normal and not caused by oil leakage. However, if there is not only sludge but also oil stains or droplets on the cylinder wall and lower mounting ring, it indicates oil leakage. 3. Ride Feel: Normally, when the vehicle passes over a bump or pothole at a moderate speed, the body will inevitably experience jolts and vibrations. If the shock absorber is faulty or the springs are too soft, the amplitude of the vibrations will be larger. If the vibrations persist for an extended period, it suggests that the shock absorber's damping performance has degraded or failed. Otherwise, it is functioning normally. 4. Individual Testing: Remove the shock absorber from the vehicle, stand it upright, and clamp the lower connecting ring in a vise. Pull and press the shock absorber rod several times. There should be stable resistance, with the resistance during upward pull being greater than during downward press. If the resistance is unstable or absent, it may indicate insufficient oil inside the shock absorber or damaged valve components, requiring repair or replacement.

6

2

Share

What are the techniques for 0-100 km/h acceleration in a manual transmission car?

For 0-100 km/h acceleration in a manual transmission, you need to memorize the positions of each gear and avoid looking down at the gearshift while driving. Additionally, practice shifting gears quickly and smoothly. Practical techniques: Prepare for the start: start the car, engage the handbrake, and shift into first gear. Press the clutch pedal fully, gently tap the accelerator, slowly release the clutch, and disengage the handbrake to start the car in first gear. Watch the tachometer—when the RPM reaches around 2000, quickly press the clutch fully and shift to second gear. After shifting, release the clutch and continue accelerating. Monitor the tachometer again—when the RPM reaches around 3000, quickly press the clutch fully and shift to third gear. After shifting, release the clutch and continue accelerating. At this point, you should feel the car accelerating noticeably, with the engine roaring as the RPM approaches 4000, indicating the engine is fully engaged. Shift directly to fifth gear. You can maintain acceleration in fifth gear, but remember to downshift when the speed drops. If the RPM falls below 3500, shift back to third gear. Test requirements: For the fifth-gear acceleration test in Subject 3 of the driving exam, some regions allow shifting directly from third to fifth gear, while others require shifting from third to fourth and then to fifth. This depends on the specific exam requirements of each region.

1

0

Share

Is the Fista's transmission wet or dry?

The Fista's transmission is dry. This car uses a 7-speed dual-clutch transmission. A dual-clutch transmission is a type of transmission developed based on manual transmissions, and its structure is similar to that of a manual transmission. The dual-clutch transmission simply has an additional set of clutches and a set of gear-shifting control mechanisms compared to a manual transmission. The Fista is a sports sedan under Beijing Hyundai, equipped with 1.4T and 1.6T power engines. In terms of suspension, the Fista features a MacPherson strut independent front suspension and a multi-link independent rear suspension. Regarding body dimensions, the Fista measures 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm.

13

1

Share

What is the method to eliminate the small wrench warning in the Arrizo 5?

What is the length of the BAIC Senova X25?

What are the consequences of not changing transmission oil?

Is a 1.5L Car Engine Powerful Enough?

How to Determine the Quality of Shock Absorbers?

What are the techniques for 0-100 km/h acceleration in a manual transmission car?

Is the Fista's transmission wet or dry?

How Does a Car Steering System Work?

Does Adding a Rear Spoiler Require Registration?

Why can't Ora suddenly charge?

How to Turn Off the Rear Wiper of the Qoros 5?