What is the method to distinguish China VI vehicles?

1 Answers
SanAriel
07/30/25 10:15am
China VI vehicles can be distinguished by: 1. Checking the vehicle's factory qualification certificate; 2. Referring to the vehicle's environmental protection standard list; 3. Reviewing the vehicle conformity certificate. China VI standards specify a carbon monoxide emission limit of 700mg per kilometer, sulfur content limit of 5ppm, and manganese content limit of 1mg per liter. China VI adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. To check a vehicle's emission standard: 1. Look for the environmental protection compliance label; 2. Check the starting page number of the vehicle qualification certificate; 3. Estimate based on the vehicle's manufacturing year; 4. Use the original or a copy of the vehicle registration certificate to inquire at the local vehicle management office.
Was this review help?
5
3
Share
More Forum Discussions

What kind of driver's license is required to drive a Jinbei vehicle?

Jinbei belongs to small and mini passenger vehicles. According to the regulations on permitted driving models in the "Rules for the Application and Use of Motor Vehicle Driving Licenses", a C1 driver's license is sufficient to drive a Jinbei. The following are the driving requirements for a C1 license: 1. Permitted vehicles: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses", the scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special operation vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. According to this standard, a C1 license cannot be used to drive vehicles with more than 9 seats. 2. Prohibited vehicles: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.
20
1
Share

Can the Trunk Be Opened When the Car is Locked?

It is a control system issue if the trunk can still be opened when the car is locked. Reasons why the trunk can still be opened when the car is locked: The trunk lock hook or the trunk control system may be malfunctioning, the trunk switch button on the key may have been accidentally pressed, or the key may have a proximity sensor function, allowing the trunk to be opened within one meter of the car even when it is locked. Solutions for when the car is locked but the trunk can still be opened: Repair or replace the trunk locking motor, adjust the alignment between the closing limit rubber block and the locking mechanism, inspect and repair the trunk control wiring, place the key farther away from the vehicle, and check if the trunk can still be opened. Locking Jammer: This is a signal blocker that emits electromagnetic waves to interfere with the car remote's signals, causing the car to appear locked when it is not.
8
2
Share

Is it better for shorter people to drive a sedan or an SUV?

If you are not very tall, it is not recommended to buy an SUV, as SUVs inherently have larger blind spots, which would be even more pronounced in this case. A hatchback sedan would be more suitable. Below are some additional details: 1. Considerations: When driving, forward visibility is crucial. Regardless of the vehicle type, it's important to be aware of the blind spots, specifically the areas blocked by the two pillars on either side of the windshield. The extent of obstruction at different angles and how much of the front or even the side view is covered are critical for driving safety. 2. Comparison: Compared to sedans, most SUVs have higher seating positions, which theoretically offer a more open view. However, one must not overlook the visibility through the front windshield or the impact of the two A-pillars beside it. Therefore, the choice between an SUV and a sedan should be based on visibility and vehicle size, ultimately depending on personal preference.
6
1
Share

Why is there water leaking under the Corolla?

If it's summer, water leaking from the Corolla is normal behavior—it's condensation water from the air conditioning system. Here are the reasons for the air conditioning system drainage: 1. Lowering the interior temperature: Due to high interior temperatures, the driver needs to activate the cooling system to reduce the cabin temperature. At this time, moisture in the hot air inside the car condenses on the surface of the extremely cold evaporator's heat-absorbing fins. The condensed water droplets are collected by the evaporator's plastic housing and drained out of the vehicle through pipes. 2. Lack of insulation foam wrapping: The low-pressure pipes of the car's air conditioning system are not wrapped with insulation foam, making the pipe surfaces prone to condensing moisture from the air. Water droplets will also condense and accumulate at the lowest point of the pipes before dripping off.
6
2
Share

Does a non-functioning fog light affect the annual inspection?

A non-functioning fog light will fail the annual inspection: 1. The annual inspection checks the performance of the vehicle's lights, so a non-functioning fog light will affect the inspection. The annual vehicle inspection is a mandatory test for all vehicles that have obtained official license plates and registration certificates, equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." 2. Below is relevant information about the annual inspection content: (1) Check whether the engine, chassis, body, and their accessories are clean, complete, and functional, whether the paint is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records. (2) Test whether the vehicle's braking performance, steering control, lights, exhaust, and other safety features comply with the requirements of the "Technical Conditions for Motor Vehicle Safety Operation." (3) Check whether the vehicle has been modified, altered, or transformed, and verify the registration certificate and license plate.
15
3
Share

What is the paint thickness of the Camry in centimeters?

The paint thickness of the Camry is 0.0099cm. Functions of car paint: Sealing and rust prevention, aesthetics, resistance to general natural corrosion and impact from small particles. The thickness of the paint does not necessarily indicate its quality—thicker is not always better, nor is thinner worse. The key factors are the coating process and the quality of the paint itself. Car paint layers: The innermost layer is the electrocoat layer, approximately 20 microns thick, which serves to prevent rust and enhance paint adhesion. Next is the primer layer, about 30 microns thick, which ensures the hardness of the paint and 'bonds' the color layer. The third layer is the color layer, around 20 microns thick, which determines the color of the car. The skill of a paint repair technician is often measured by their ability to match the color layer accurately. The outermost layer is the clear coat, approximately 30 microns thick, which protects the color layer and enhances gloss.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.