What is the method to disable the anti-theft alarm on the Geely Vision?
3 Answers
The method to disable the anti-theft alarm on the Geely Vision is to simultaneously press the unlock and lock buttons on the remote control for two to three seconds. Taking the 2018 Geely Vision as an example, its body structure is a four-door, five-seat sedan. The body dimensions are: length 4599mm, width 1747mm, height 1482mm, with a wheelbase of 2615mm. The fuel tank capacity is 45 liters, and the curb weight is 1210kg. The 2018 Geely Vision features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, maximum power of 80kW, and maximum torque of 140Nm.
As a long-time owner of the Geely Vision, let me share some experience with disabling the anti-theft alarm. The unlock button on the remote key is the most straightforward method - just press it near the vehicle to deactivate the alarm and open the doors. If there's no response, don't panic. It might just be a dead key battery; try replacing it with a new CR2032 coin cell (usually the key's back cover pops open easily with a pry). Still not working? Then use the mechanical key to turn the lock cylinder on the driver's door - this should stop the alarm. Finally, remember to insert and turn the ignition key once to reset the system. For daily maintenance, avoid dropping the remote and keep it away from humid environments to reduce false alarms. While the anti-theft system ensures security, always handle it patiently and regularly check your car battery voltage to prevent overall system abnormalities.
When repairing a car, encountering too many anti-theft alarm issues with the Geely Vision is common, but unlocking it is simple. First, press the remote unlock button—if there's no sound, it's done. If it doesn't work, use a multimeter to check the key battery voltage; replace it if it's below 3 volts. If manual unlocking fails, the system might be frozen—open the hood, disconnect the negative terminal of the car battery for a few minutes, then reconnect to reset it. Note that the anti-theft sensor is near the door; clean dust to avoid false triggers. For safety, avoid randomly disconnecting wires during an alarm to prevent short-circuit risks. After handling, it's advisable to visit a professional shop for a system check to prevent recurrence.
