···
Log in / Register

What is the method to adjust the clock in a GL8?

4 Answers
ParkerRose
09/01/25 2:41am

The method to adjust the clock in a GL8 is: 1. Turn on the radio power; 2. Press and hold the RPT button on the panel for 3 seconds; 3. When the screen display starts flashing, rotate the knob on the right to adjust the hour; 4. Press the center button of the right knob to select and adjust the minutes. Taking the 2021 GL8 as an example, it belongs to the MPV category, with body dimensions of: length 5238mm, width 1878mm, height 1776mm, wheelbase 3088mm, fuel tank capacity 66L, and curb weight 1880kg. The 2021 GL8 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, maximum power of 174kW, and maximum torque of 350Nm, paired with a 9-speed automatic transmission.

Was this review help?
12
5
Share
DeHarper
09/13/25 5:36am

When I drive the GL8, adjusting the clock is quite simple. First, start the vehicle to power up the center display. Look for the settings button near the steering wheel or on the dashboard, press it to enter the menu. Use the directional keys or touchscreen to navigate to the time setting option, usually indicated by a clock icon. Then adjust the hours and minutes using the knob or buttons, and remember to confirm and save the changes. If the car has an auto-sync feature, enabling it will update the time via GPS, but manual adjustment is also convenient. Additionally, the time may reset after a battery replacement, so adjust it promptly to avoid confusion while driving. Tip: Regularly check the time accuracy, especially before long trips, to ensure navigation reminders are correct. This method is safe and hassle-free.

Was this review help?
3
1
Share
Expand All
DiEloise
10/27/25 6:22am

I helped a friend adjust the GL8 clock, and the steps were straightforward. You sit in the driver's seat, start the engine or press the power button, and once the infotainment system activates, press the menu button to enter the settings interface. Select the time setting, use the arrow keys or touchscreen to adjust the numbers, and save the changes once done. If your car is a high-end version, it might have an integrated app, allowing you to adjust it remotely via your phone to avoid distractions while driving. Although adjusting the clock seems minor, it plays a big role in keeping you on schedule with calendar reminders. Don’t forget, the system may respond slower in cold weather, so just wait patiently for it to load.

Was this review help?
10
2
Share
Expand All
LeilaRose
12/10/25 6:37am

I've been driving a GL8 for years, and adjusting the clock is not difficult. After turning on the power, tap the settings icon on the center console screen, find the time option, and slowly adjust the numbers to confirm. The system design is user-friendly, making it easy for beginners to get the hang of it quickly. Remember not to skip the save step. It's safer to adjust the clock when the vehicle is stationary.

Was this review help?
3
2
Share
Expand All
More Forum Discussions

How many electric motors does the Ferrari SF90 have?

The Ferrari SF90 is equipped with three electric motors, distributed on both the front and rear axles, and utilizes a ternary lithium-ion battery. These three motors, combined with a 3.9T twin-turbocharged engine, deliver a combined power output of 735 kW and a combined torque of 900 Nm. The drivetrain features a mid-engine layout with all-wheel drive (AWD), specifically an electric all-wheel-drive system. The Ferrari SF90 is a sports car introduced by Ferrari, with dimensions of 4704 mm in length, 1973 mm in width, and 1191 mm in height, and a wheelbase of 2650 mm. Both front and rear brakes are ceramic ventilated discs, and the body structure is of a unibody design. The front tire specification is 255/35R20, while the rear tire specification is 315/30R20.
12
4
Share

Do You Need to Press the Accelerator When Reversing in an Automatic Transmission Car?

When reversing in an automatic transmission car, you generally do not need to press the accelerator. Simply shift into the R (Reverse) gear and release the brake, and the car will move backward automatically. However, in certain situations such as when on a slope or when the wheels are on a speed bump, the idle power of the engine may not be sufficient to overcome the resistance. In such cases, you may need to lightly press the accelerator to assist in reversing. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
16
4
Share

Where is the tire pressure reset button on the Great Wall Pao?

The tire pressure reset button for the Great Wall Pao is the SET button on the central dashboard. Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing a tire pressure fault. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are required. Failure to reset the tire pressure monitoring: After inflating the tires, if the tire pressure is not reset promptly, the monitoring system will retain the previous data, causing the tire pressure warning light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new component.
13
5
Share

Can Green and Red Antifreeze Be Mixed?

Whether green and red antifreeze can be mixed depends on the brand and composition of the antifreeze. Antifreeze of different brands or compositions should not be mixed. This is because the production formulas of antifreeze from different brands may vary, and mixing them could lead to chemical reactions between various additives, rendering them ineffective. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. It also prevents the coolant from freezing and expanding in cold winters, which could otherwise crack the radiator or damage the engine cylinder block or head. The main components of antifreeze are: 50% pure water, 40% methanol, and 10% other substances. It is generally categorized into three types: ethanol-water, glycerol-water, and ethylene glycol-water.
18
1
Share

Is Braking Distance the Same as Stopping Distance?

Braking distance is indeed stopping distance, so the faster the vehicle speed, the longer the braking distance (stopping distance). Braking distance is one of the key parameters to measure a vehicle's braking performance, consisting of two parts: reaction distance and braking distance. Below are the relevant explanations: Reaction Distance: The distance traveled by the vehicle from the moment the driver notices a situation and intends to stop until the brake pedal is pressed and braking action begins is called reaction distance. Reaction distance depends on the driver's level of concentration, technical proficiency, and the vehicle's speed. Higher concentration and better technical skills result in a shorter reaction distance, while the opposite leads to a longer reaction distance; the faster the vehicle speed, the longer the reaction distance, and vice versa. Braking Distance: The distance traveled by the vehicle from the moment the driver presses the brake pedal and braking action begins until the vehicle comes to a complete stop is called braking distance. The length of the braking distance is related to the vehicle's speed, braking force, coefficient of friction, etc. The faster the speed, the longer the braking distance—for example, doubling the speed increases the braking distance by four times. The greater the braking force, the shorter the braking distance, and vice versa.
18
5
Share

Why is there a hump in the middle of the back row in some cars?

Some cars have a hump in the middle of the back row because: for the flatness of the chassis, as the car's underbody is equipped with an exhaust pipe or drive shaft, usually rear-wheel-drive cars must transmit the engine's power to the rear wheels through the drive shaft, so structurally, such a hump is necessary. The hump between the front and rear seats from front to back is a structural design intended to enhance the longitudinal rigidity of the cabin, while also providing space for the exhaust pipe to run backward without affecting the chassis's ground clearance. If the chassis were a flat steel plate, it would easily "fold" upon impact. However, if the chassis is designed with a semi-circular hump, its ability to withstand impact can be many times stronger than a flat steel plate, and it is less prone to deformation. This is similar to adding a steel beam to the chassis.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.