What is the method to activate keyless entry?

3 Answers
MacLilliana
07/24/25 2:04am
Keyless entry is activated by: bringing the key close to the vehicle body, which automatically unlocks the doors and disarms the security alarm, while the turn signals flash twice. At this point, you can simply open the door. The functions of a car's keyless entry system include: 1. Automatic window roll-up and security activation; 2. Wireless remote control; 3. Anti-theft alarm; 4. Online diagnostics. The working principle of the keyless entry system: it uses advanced radio frequency identification (RFID) technology to automatically lock and unlock the doors by sensing the chip in the smart card carried by the owner. The door locks will automatically open and disarm the security system when the driver approaches, and automatically lock and activate the security system when the driver leaves the vehicle.
Was this review help?
2
1
Share
LucilleRose
08/10/25 9:16pm
Using a keyless system is actually super simple. I do it every day when driving without having to take out the key. As long as the key is in your pocket or bag and within about two meters of the car, the vehicle can detect it. Then, walk up to the door, look for the button on the handle, press it lightly, and the door opens. Some cars even allow you to unlock by simply pulling the handle. Just remember to always carry the key and not place it too far away, as garage signal interference might sometimes cause a slight delay in response. If the battery is running low, the dashboard will alert you to replace it. This feature makes life much more convenient, especially on rainy days when you're carrying stuff—just press the button with one hand and get in effortlessly. In short, once you get used to it, it becomes second nature.
Was this review help?
16
4
Share
Expand All
SanKarter
09/24/25 3:45am
I think safety is the most important thing, so don’t be careless when operating. Keep the key in your bag and carry it with you—the system only activates when you’re within one meter of the car. Press the small button on the door handle to unlock. To lock the car, press the same spot to ensure it’s secured. Don’t leave the key lying around to avoid theft or signal interference. If it malfunctions, check if the key’s battery is low or if there’s mobile signal interference—older cars require extra attention. Maintain an appropriate distance during use; don’t stand too close or too far. In short, this system is convenient but requires responsibility.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How to solve the simultaneous illumination of ABS and airbag lights in the Ford Escort?

It is recommended to go to a 4S shop or repair shop to check if the gap between the copper pieces of the front wheel sensor plug is too large or if the cable is disconnected. Then clear the ABS and airbag light fault codes, and the issue should be resolved. Below is relevant information: 1. ABS: ABS (Anti-lock Braking System) is an anti-lock braking system; it sends signals through sensors installed on the wheels indicating that the wheels are about to lock up. The controller then instructs the regulator to reduce the oil pressure in the wheel's brake cylinder, decreasing the braking torque. After a certain period, the original oil pressure is restored, and this cycle repeats continuously (up to 5~10 times per second), keeping the wheels in a rotating state while maintaining maximum braking torque. 2. Airbag: Airbag (Air-bag, or Supplementary Restraint System, abbreviation: SRS); refers to an inflatable soft bag installed in the car, which is deployed instantly in the event of a collision to provide cushioning and protect the safety of the driver and passengers. Generally, in the event of a collision, it can prevent the heads and bodies of the occupants from directly hitting the interior of the vehicle, reducing the severity of injuries.
15
0
Share

How many days after a new car leaves the factory is the certificate of conformity uploaded?

New cars upload the certificate of conformity 7 days after leaving the factory. The certificate of conformity is issued simultaneously with the vehicle, but the information must be uploaded to the National Development and Reform Commission (NDRC), which then saves it into the database for the vehicle management office to access. This process typically takes around one and a half weeks. Vehicle Certificate of Conformity: The vehicle certificate of conformity is issued with the vehicle when it leaves the factory. It must be submitted to the vehicle management office for archiving when registering the vehicle's license plate, and it is replaced by the motor vehicle registration certificate. Engine Number: The vehicle dealer will check with the vehicle management office during the settlement process. There is an engine number that can be compared to verify if it matches the engine number recorded at the time of production and the one on the vehicle's registration certificate. The vehicle management office where the car is registered will also have a rubbing of the engine number from the time of registration. Vehicle Management Office Website: You can check the certificate of conformity number of the vehicle on the vehicle management office's website.
9
4
Share

How many years after purchasing a new car does it require an annual inspection?

If the new car is a small or micro non-commercial passenger vehicle, it requires an annual inspection after exceeding 6 years. Introduction to Annual Inspection: Motor vehicle inspection includes three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive vehicle performance inspection. Annual inspection, also known as annual check-up, refers to the safety inspection conducted every year or every two years on a vehicle. This includes a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc. Annual Inspection Process: Upon arrival at the inspection station, the first step is the exterior inspection. The owner needs to park the vehicle in the designated area for exterior inspection, prepare the fire extinguisher and triangular warning sign, open the vehicle's engine hood and trunk, and wait for the staff to conduct the inspection. After payment, the owner must submit their ID card and vehicle license to the staff, who will then enter the vehicle's annual inspection information into the system. Once these steps are completed, the owner can take the form and wait for the online inspection. If the online inspection is passed, the owner can proceed to the final procedures at the general inspection office.
10
3
Share

Why Are There Holes in the Engine Hood?

The reason there are holes in the engine hood is for heat dissipation. Some are due to high compression ratio boosting. You can open the engine hood to check what's underneath—if it's an intake partition, then it's for boosting; if it's an intercooler, then it's for heat dissipation. Airflow Guidance Function: For objects moving at high speed in the air, the air resistance and turbulence generated around the moving object directly affect its trajectory and speed. The shape of the engine hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the car. Through guidance, air resistance can be decomposed into beneficial forces, increasing the force of the front tires on the ground, which helps stabilize the car's movement. Protection for the Engine and Surrounding Pipeline Components: Under the engine hood are critical components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system. These are vital to the vehicle. By enhancing the strength and structure of the engine hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the normal operation of the vehicle.
3
2
Share

What is the engine speed of a motorcycle?

Motorcycle engine idle speed is 1400 (±100) RPM. Most domestic motorcycles have a maximum speed between 7,000 and 9,000 RPM. Some domestic motorcycles can reach up to 11,000 RPM. Tachometer working principle: Electronic tachometers utilize electromagnetic principles: a piece of iron is connected to the needle, surrounded by an electromagnetic coil. The electromagnet has three wires: positive, negative, and the high-voltage pack input wire, which is the engine's ignition wire. Each time this wire discharges, the engine ignites once, meaning the engine rotates twice. Based on this principle, every time the electromagnet is energized, it magnetizes once. The faster the rotation, the stronger the magnetic force, causing the needle to move upward. Mechanical tachometer: Mechanical tachometers use a flexible steel wire connected at one end to the engine and the other end to the instrument panel. The engine's power drives the rotation of the flexible wire. Inside, there is a circular magnet with a bowl-shaped iron disk attached to it, and the needle is mounted on the disk. The faster the rotation, the quicker the magnetic force moves the iron bowl. The principle of the mechanical tachometer is the same as that of the odometer on the left.
4
4
Share

Can someone else handle the driver's license renewal for me?

Driver's license renewal can be handled by someone else. The process and required documents are as follows: 1. Prepare two 1-inch photos and a medical certificate, with one photo attached to the top right corner of the medical form and the other kept for the new license. 2. Bring your ID card and driver's license to the service hall, fill out the "Renewal Application Form," then submit the documents, medical certificate, and application form to the staff, pay a 10-yuan fee, and wait for the new license to be issued. 3. Before renewal, check if there are any unresolved traffic violations. If so, they must be handled first; otherwise, renewal will not be processed. 4. Renewal can be done up to 90 days in advance. Plan your time wisely to avoid expiration. If your license expires and you are caught by traffic police, you will be fined 50 yuan without any points deducted. 5. It is best to take the renewal photos and medical certificate directly at the police station's service hall, where the fee is 10 yuan for both. Otherwise, there is a risk of disqualification, requiring retakes and delaying the process. Renewal is usually completed on-site, but in some large cities, it may take a few days, though it must be completed within 15 days, after which you will be notified to collect your new driver's license.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.