···
Log in / Register

What is the method for using the steering wheel while driving?

4 Answers
SanElliot
08/31/25 2:04am

The method for using the steering wheel while driving is: 1. Place both hands with appropriate force at the 9 o'clock and 3 o'clock positions of the steering wheel; 2. Naturally grip the wheel with fingers inward and extend thumbs naturally along the edge of the steering wheel. The function of the steering wheel: It converts the force applied by the driver on the edge of the steering wheel into torque and transmits it to the steering shaft. Precautions for using the steering wheel: 1. Control the steering wheel by pushing with the left hand and pulling with the right hand in a smooth and gentle motion; 2. When holding the steering wheel, use your hands to support it to reduce bad driving habits; 3. Turn the steering wheel more for more correction, less for less correction, and quickly for quick correction, ensuring the return speed is fast and accurate.

Was this review help?
18
3
Share
Jayla
09/12/25 5:38am

Proper steering wheel usage is crucial while driving. I always advise beginners to hold the wheel at the 9 and 3 o'clock positions with symmetrical hand placement for better control. When turning, use the push-pull technique – for a left turn, push with your right hand while pulling with your left, and vice versa for right turns. Avoid crossing your arms, as this can lead to loss of control, especially during high-speed driving or sharp turns. Adjust your seat so your elbows are slightly bent, not fully extended, and maintain an upright posture. Practice slow turns in open areas to master the fluidity of push-pull movements, preventing skidding or misjudgment. Remember, the steering wheel isn't just for direction control – it's vital for overall safety. Develop good habits from day one.

Was this review help?
6
0
Share
Expand All
LeviDella
10/26/25 6:28am

As someone who has been driving my family around for years, I deeply understand the importance of the steering wheel. The grip must be at the 9 and 3 o'clock positions, allowing quick reactions during turns or emergencies. The push-pull steering method is much safer than crossing arms, significantly reducing accident risks. It's also crucial to maintain a comfortable sitting posture—avoid leaning too far forward and keep elbows slightly bent. During long drives, I make it a habit to slightly adjust my hand positions periodically, but always keep both hands on the wheel. Proper steering wheel usage, combined with brake and accelerator control, ensures smooth transitions and boosts driving confidence. Develop a routine inspection habit—don't wait for problems to arise before regretting it.

Was this review help?
13
2
Share
Expand All
LaylaLee
12/09/25 6:48am

The basic method of holding the steering wheel is to place both hands at the 3 and 9 o'clock positions, using a push-pull motion for steering. I always operate this way when driving, and it feels very natural. The push-pull technique prevents hands from getting stuck during sharp turns, especially when navigating city corners or avoiding potholes. Adjust your seat properly to keep your body relaxed yet alert. Never drive with one hand or while distracted, as that can easily lead to mistakes. A little practice is all it takes to master this, and safety should always come first.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to Replace the Turn Signal Light on a Geely Emgrand?

Geely Emgrand turn signal light replacement method is: 1. Open and secure the car hood; 2. Locate the turn signal above the headlight assembly; 3. Twist the old turn signal counterclockwise to remove it and install the new one. The Geely Emgrand has body dimensions of: length 4632mm, width 1789mm, height 1470mm, with a wheelbase of 2650mm. The Geely Emgrand is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 80kW and maximum torque of 142Nm. It features front-wheel drive, with MacPherson strut front suspension and torsion beam rear suspension.
7
4
Share

How Often Should the BMW 5 Series Alternator Belt Be Replaced?

The alternator belt of the BMW 5 Series should be replaced every 80,000 kilometers. The alternator belt is one of the main belts in a car, connecting components such as the alternator, air conditioning compressor, power steering pump, idler pulley, tensioner pulley, and crankshaft pulley. The power source for the alternator belt is the crankshaft pulley, with power provided by the rotation of the crankshaft. The BMW 5 Series has a body size of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm and a fuel tank capacity of 68 liters. Its body structure is a 4-door, 5-seat sedan, equipped with a 2.0T turbocharged engine that delivers a maximum power of 135kW and a maximum torque of 290Nm, paired with an 8-speed automatic transmission.
8
0
Share

Why can't the Passat detect the key?

The reasons why the Passat cannot detect the key are: 1. The anti-theft system is not deactivated, and the signal cannot be detected; 2. Or the key has been dropped or impacted, causing the chip inside the key to shift position. The body dimensions of the Passat are: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, and fuel tank capacity 68.5 liters. The Passat is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm. It uses a MacPherson strut front suspension and a multi-link independent rear suspension.
8
1
Share

What maintenance items are needed for a car at 20,000 kilometers?

Maintenance items for a car at 20,000 kilometers include: 1. Engine oil; 2. Oil filter; 3. Fuel filter; 4. Air filter; 5. Cabin air filter; 6. Spark plugs; 7. Coolant. The purposes of car maintenance are: 1. To ensure the vehicle is in optimal operating condition; 2. To effectively improve vehicle efficiency and reduce wear on parts and tires; 3. To enhance driving safety; 4. To prevent vehicle breakdowns; 5. To reduce noise and environmental pollution; 6. To maintain the vehicle's appearance and prevent damage. Key considerations for car maintenance include: 1. Using high-quality lubricants; 2. Performing scientific and reasonable repairs; 3. Maintaining proper tire inflation.
19
5
Share

Where is the sunroof drain located?

The sunroof drains are located inside the vehicle's A-pillars and C-pillars. The functions of a sunroof are: 1. Effectively ventilate the interior and increase fresh air intake; 2. Provide an open view and meet the shooting requirements for mobile photography. The sunroof is installed on the roof and can be opened by: rotating the sunroof switch button. There are several types of car sunroofs: built-in sunroofs, pop-up sunroofs, and panoramic sunroofs. Maintenance methods include: 1. Clean the sunroof drainage channel promptly and regularly wipe the sunroof rails with a damp sponge; 2. Apply silicone oil to the sunroof seal after washing the car to effectively prevent aging of the rubber seal and extend its service life.
17
0
Share

What is the emission standard for the 2018 Sagitar?

The 2018 Sagitar complies with the China V emission standard. The emission standard refers to regulations on the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and carbon smoke emitted from vehicle exhaust. The dimensions of the 2018 Sagitar are: length 4655mm, width 1780mm, height 1453mm, with a wheelbase of 2651mm and a minimum ground clearance of 113mm. The 2018 Sagitar is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 81kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.