What is the method for using a car jack?

1 Answers
AnastasiaAnn
07/30/25 5:48am
The method for using a car jack is: 1. Take out the car jack from the vehicle; 2. Locate the jacking support point under the side door panel of the car; 3. Place the jack at the support point; 4. Use the crank to raise the jack, turning clockwise to lift and counterclockwise to lower. Precautions for using a jack include: 1. Secure the car properly to prevent instability after lifting; 2. Implement safety warning measures; 3. Pay attention to ground conditions and choose a suitable surface for the jack; 4. Be mindful of the jack's weight capacity; 5. Align with the vehicle's chassis support points; 6. Place a spare tire under the car; 7. Perform the lifting operation steadily and slowly.
Was this review help?
8
3
Share
More Forum Discussions

What engine does the BMW Z8 use?

The BMW Z8 is equipped with a 4.9-liter V8 engine. At 6,600 rpm, the engine delivers a maximum output power of 294 kW, a maximum torque of 500 Nm, and a maximum horsepower of 400 hp. The powertrain is paired with a 6-speed manual transmission, ensuring ample power reserve at any engine speed. The BMW Z8 has body dimensions of 4.4 meters in length, 1.83 meters in width, and 1.317 meters in height, with a wheelbase of 2.5 meters. The BMW Z8 features a front-engine, rear-wheel-drive layout. The chassis and suspension of the Z8 primarily utilize aluminum alloy materials. The front axle employs a new spring support device, with a precise rack-and-pinion steering system, while the rear axle is of an integral design.
18
5
Share

How to use the automatic parking feature in the Tiguan L?

The method to use the automatic parking feature in the Tiguan L: 1. When approaching a parking space, the driver must activate the automatic parking function, with the button located at the bottom of the center console. Once enabled, the sensors distributed on the sides of the vehicle will begin detecting suitable parking spaces along the roadside. 2. When a suitable parking space is detected, the onboard computer will display a notification and prompt the driver to shift into reverse (R) gear. Engaging the R gear will initiate the automatic parking process. In terms of exterior design, the Tiguan L maintains a similar appearance to the overseas standard Tiguan model, featuring a clean and straightforward style. Compared to the standard wheelbase model, it includes additional chrome trim pieces, and the C-pillar design has been slightly modified. Regarding dimensions, the Tiguan L measures 4712 mm in length, 1839 mm in width, and 1673 mm in height, with a wheelbase of 2791 mm.
10
0
Share

How to adjust the time on Volkswagen Magotan?

Method to adjust the time on Volkswagen Magotan: 1. Insert the key into the ignition to power on the vehicle. There is a button each at the bottom left and right corners of the instrument panel; 2. Press the left button once, which is the selection button. Pressing it once adjusts the hour; 3. Press the right button once, which is the adjustment button. Pressing it once increases the value by one; 4. Press the left button twice to adjust the minutes. The Magotan originates from the Future B6, which is closely related to the Passat B6. It is also the first B-class sedan produced and sold by FAW-Volkswagen since its establishment. In terms of body dimensions, the Magotan measures 4865 mm in length, 1820 mm in width, 1475 mm in height, and has a wheelbase of 2812 mm.
12
5
Share

How to Check the Tire Pressure Monitoring in Mazda 3 Axela?

The method to check the tire pressure monitoring in Mazda 3 Axela: If the system detects that one or more tires have low pressure, the low tire pressure indicator on the instrument cluster will illuminate, and for vehicles equipped with a driver information center, a message to check the tire pressure will appear. If this message appears, immediately stop and inspect all tires for damage, then inflate the tires to the recommended pressure. After the repair is completed, the tire pressure monitoring system must be reset. The Mazda 3 Axela is a compact car under Changan Mazda, with dimensions of 4662 mm in length, 1797 mm in width, and 1445 mm in height, and a wheelbase of 2726 mm. In terms of suspension, the Mazda 3 Axela features a MacPherson strut front suspension and a torsion beam rear suspension.
16
4
Share

Which gear is better for uphill driving?

When driving uphill, the gear selection depends on the engine speed of the car. If the engine speed drops below 2000 RPM while driving in third gear, it is necessary to downshift to second gear. If the slope is too steep and the car is fully loaded, first gear should be used for uphill driving. Below is additional information about gears: Meaning of gear shifting: Gear shifting refers to the transmission, which is used to change the torque and speed of the engine crankshaft to meet the different requirements of driving wheels' traction and speed under various driving conditions such as starting, accelerating, driving, and overcoming road obstacles. Function of gears: The function of gears is to allow the car to drive at a very low and stable speed, which is difficult to achieve solely by the engine's minimum stable speed. The reverse gear of the transmission allows the car to move backward, and the neutral gear enables the car to separate the engine from the drivetrain for extended periods during engine startup, parking, and coasting.
20
4
Share

How to reset the tire pressure monitoring system on the CRV?

Methods to reset the tire pressure monitoring system on the CRV: 1. Press the arrow button on the lower right side of the steering wheel until the central display shows the personalized settings; 2. Press the sel/reset button to enter the tire pressure monitoring system calibration; 3. Press sel/reset again to set the tire pressure monitoring system calibration; 4. Press the arrow button on the lower right side of the steering wheel to display calibration 2 of 2, then press sel/reset to start the calibration. The system will reset after a few seconds. The CRV is a compact SUV under Dongfeng Honda, with dimensions of 4621mm in length, 1855mm in width, and 1679mm in height, and a wheelbase of 2661mm. In terms of power, the CRV is equipped with a turbocharged engine that delivers a maximum horsepower of 193 hp and a maximum torque of 243 Nm.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.