What is the method for sunroof initialization?

[McEmilia]

Here is the method for sunroof initialization: 1. Sunroof initialization method for MD2 motor: 1. First, manually force the sunroof to close. 2. Remove the overhead light cover (the panel of the sunroof switch), disconnect the motor wiring harness connector or disconnect the negative battery cable, wait for 10 seconds, and then reconnect the wiring harness or power supply. 3. Rotate the switch from the closed position to the open position by about 15°, then quickly rotate it back to the closed position. After hearing a "click" sound from the motor, press and hold the button. At this time, the sunroof will automatically complete a cycle. After the automatic cycle is completed, it indicates that the sunroof initialization is complete. 4. Turn off the ignition switch for 5-7 seconds, and the sunroof setting memory will be completed. 2. Sunroof initialization method for MD4 motor: 1. Press and hold the switch in the closed position for 25-30 seconds. The sunroof will open to the maximum. 2. The glass will shake slightly. At this time, release and press the switch again. The sunroof will then perform an automatic cycle of lowering, opening, and closing, indicating that the sunroof initialization is complete.