What is the method for resetting the tire pressure on the Volkswagen Lamando?

Which Side is the Accelerator and Which Side is the Brake?

In an automatic transmission car, both the brake and accelerator are located under the feet. The accelerator is on the far right, and the brake is to the left of the accelerator. Both are controlled by the right foot. Here is an introduction to the brake and accelerator: 1. When a person presses the brake or accelerator, the body needs support to maintain balance. When the right foot presses the pedal, the left foot can stabilize the body on the floor. If both feet are placed on the brake and accelerator separately, both feet will be in a semi-suspended state without a stable point of force, which can easily lead to instability when pressing the accelerator or brake. 2. In an emergency, if both feet are placed on the brake and accelerator, it is highly likely to make a wrong judgment, such as mistaking the accelerator for the brake. If both the brake and accelerator are controlled by one foot, this possibility will be greatly reduced, and it will also lower the vehicle's skid coefficient when pressing the brake while the accelerator is engaged. 3. If the brake in an automatic transmission car is placed where the clutch is in a manual transmission car, with the right foot controlling the accelerator and the left foot controlling the brake, the safety factor might be improved.

12

2

Share

Is 200kpa tire pressure normal?

Car tire pressure at 200kpa is not normal at this time. It is best not to continue driving. When driving with insufficient tire pressure, the most obvious effect is increased fuel consumption, because low tire pressure increases the contact area between the car tire and the ground, resulting in greater friction and increased driving resistance, leading to higher car fuel consumption. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases body vibration, indirectly affecting the lifespan of other components; Causes excessive stretching and deformation of the tire cords, reducing tire elasticity and increasing the load on the car while driving; Reduces puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks and blowouts, leading to tire bursts. Methods for insufficient tire pressure: If no damage is visible, simply inflate to normal tire pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire shop promptly for repair and then reinflate; If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check and replace the wheel rim.

12

3

Share

What are the differences between crystal coating, ceramic coating, and waxing?

Here is an introduction to crystal coating, ceramic coating, and waxing: 1. Crystal Coating: This technology forms a layer of multiple strong protective crystals and a UV filter on the car's surface, enhancing the paint's brightness and hardness, preventing scratches, UV rays, and corrosion. It completely isolates dust, oil stains, mold, water molecules, and other microparticles, providing resistance to UV rays, oxidation, friction, and fading while increasing the paint's hardness. It helps maintain the paint's original bright and vibrant color for a long time. Composed of a dense and stable high-molecular inorganic substance, it does not undergo material changes under drastic temperature fluctuations. After application, it quickly forms a smooth, transparent, and durable protective layer, representing the world's leading automotive paint maintenance technology. 2. Ceramic Coating: This is the core technology of the third-generation paint surface beauty process. It uses non-petroleum eco-friendly materials such as glass cellulose, silicon polymers, fluorine polymers, and high-purity water, ensuring a tighter and longer-lasting bond with the car's paint, typically lasting about half a year. Based on traditional polishing techniques, ceramic coating involves evenly applying a polymer coating to the car's paint, forming a protective film that significantly enhances the paint's gloss and improves its durability and anti-aging properties. 3. Waxing: This is the traditional first-generation paint surface beauty solution, where a protective wax is applied to the car's surface and then polished to a shine. The main components are petroleum-based. Car wax effectively isolates the paint from harmful gases and dust, prevents static electricity to avoid dust sticking to the paint, and enhances the paint's brightness.

18

4

Share

How to Maintain Tires in Daily Life?

Daily maintenance of car tires: 1. Regular tire pressure check: Tire pressure should not be too high or too low. Excessive pressure may cause a blowout risk due to inability to withstand over-expansion during high-speed operation, while insufficient pressure can lead to excessive stretching of tires due to uneven road surfaces, keeping tires in a prolonged fatigue state and accelerating aging. Therefore, maintain the standard tire pressure as required by the manufacturer, including the spare tire. 2. Carry a tire pressure gauge in the car: Measurements should be taken when the tires are at normal temperature. 3. Regular tire rotation: Perform cross rotation of front and rear tires. Since cars are generally front-wheel drive, the drive wheels experience more severe wear than passive wheels. Additionally, front wheels are steering wheels, adding sliding friction to rolling friction, causing front tires to wear more than rear ones. Regular rotation ensures even wear across all four tires and improves front-wheel traction, preventing slippage and ensuring driving safety. 4. Regular balance checks: Periodic balance testing not only extends tire life but also enhances driving stability.

16

2

Share

What is an ETC card for cars?

Electronic ETC (Electronic Toll Collection), translated in Chinese as electronic non-stop toll collection (electronic toll collection), is an automatic toll system for highways or bridges. Benefits of installing ETC: Save time: eliminates the hassle of waiting in line; Green and eco-friendly: promotes low-carbon travel, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution; Reduce wear and tear: saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption, while users also enjoy a 5% discount on toll fees; Improve efficiency: ETC lanes can theoretically increase vehicle passing efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

9

3

Share

Where is TEIN suspension produced?

TEIN suspension is produced in Japan. Here is some information about TEIN: 1. This shock absorber brand is called the 'Green Suspension Master' by many car owners. Among numerous modification brands, shock absorbers with green as their main theme are rare. 2. This brand is one such representation - green symbolizes freshness, hope, and vitality, being the most gentle color in nature. 3. TEIN consistently adheres to green manufacturing concepts to maintain brand vitality. This shock absorber brand continuously researches new production technologies to provide consumers with more perfect suspension products. 4. TEIN shock absorbers originated from two racing drivers with dreams. During vehicle operation, dissatisfied with the performance requirements of shock absorbers for racing cars, they evolved from initially producing OEM shocks to today's TEIN suspension. It is precisely because of their innovative spirit and unwavering belief that they created the unique TEIN suspension we see today. 5. As a gem in the vehicle modification industry, TEIN suspension originates from the racetrack. By applying experience gained from racing to everyday use, this brand perfectly illustrates the principle that practice yields genuine knowledge. Every TEIN shock absorber undergoes strict testing before being delivered to modification enthusiasts as a high-quality product.

13

3

Share

What is the method for resetting the tire pressure on the Volkswagen Lamando?

Which Side is the Accelerator and Which Side is the Brake?

Is 200kpa tire pressure normal?

What are the differences between crystal coating, ceramic coating, and waxing?

How to Maintain Tires in Daily Life?

What is an ETC card for cars?

Where is TEIN suspension produced?

Where to Check Car Emission Standards?

What Causes Steering Wheel Vibration at Speeds Over 100 km/h?

How many liters of coolant does a BYD F3 require?

Where to Find the Date on Car Tires?