What is the method for resetting the tire pressure on the Geely Boyue?
3 Answers
The method for resetting the tire pressure on the Geely Boyue is relatively simple. You only need to drive for a while, and it will automatically return to normal data without any manual settings. Here is the relevant information: 1. The tire pressure monitoring system alerts the driver to check tire pressure and temperature status by illuminating the low tire pressure indicator light and displaying tire status information on the instrument panel. The recommended tire pressure for the Geely Boyue is 220±10 kPa, which means between 210~230 kPa. For the tire pressure inspection guide, please follow these instructions: Check the tire pressure only when the tires are cold. If the vehicle has been parked for at least 3 hours or driven less than 1.5 km, you can obtain an accurate tire pressure reading at this time. 2. The tire pressure monitoring system uses radio waves and sensing technology to detect tire pressure levels. The tire pressure monitoring system sensors monitor the air pressure in the vehicle's tires and transmit the tire pressure readings to a receiver inside the vehicle.
I remember when I last drove the Geely Boyue, I also encountered the tire pressure warning light coming on. The reset method is actually quite simple, but checking the tire pressure first is important just in case. After starting the car, don’t rush to turn off the engine—keep it in standby mode. Go to the central control touchscreen, enter the settings menu, and look for the "Vehicle Information" or "Tire Pressure Monitoring" option. Click on it, and you’ll see a reset prompt—just press the confirm button. If there’s no response, try pressing the combination of buttons on the lower left side of the steering wheel a few times to restart the system. Before operating, use a pressure gauge to check if each tire is within the range of 2.3 to 2.5 bar—the standard values are listed on the inside of the door for reference when inflating. After resetting, the warning light will turn off. It’s recommended to check the tire pressure monthly to maintain standard values, which can reduce false alarms and wear. The tire pressure sensors in this car are sensitive—even minor fluctuations due to weather changes can trigger alerts, so resetting is a common routine. However, I make it a habit to observe for a few days after resetting. If the warning reappears, I’ll have a technician check the sensors or circuits. Safety comes first—don’t cut corners for convenience.
As a new owner driving a Geely Boyue, I panicked when I saw the tire pressure alarm for the first time and immediately asked my experienced driver friend to learn the reset steps: Start the engine without turning it off, as the system needs power. Navigate to the main menu on the central control screen, find the "TPMS" icon in the lower left or upper right corner, click into it, and look for the "Learn" or "Reset" button. Gently click to confirm and wait a few seconds. The whole process is super simple, and the manual also has illustrated instructions. If it freezes, try restarting the vehicle. Afterward, I downloaded the Geely app to remotely check tire pressure, which is much more convenient. The key point is to manually check the tire pressure before resetting and use an air pump to fill it sufficiently; otherwise, the reset will be ineffective and pose greater risks. Now, before every long trip, I check the tire pressure and have the technician calibrate it during regular maintenance. Keeping the tire pressure stable in this compact SUV improves handling, saves fuel, and makes maintenance easier.
