What is the method for resetting the matching value of the rear suspension on the BMW 730?

Which Country Does Bosch Belong To?

Bosch is a German company, one of Germany's industrial enterprises, engaged in industries such as automotive and intelligent transportation technology, industrial technology, consumer goods, and energy and building technology. In 1886, when Mr. Robert Bosch, then only 25 years old, founded the company in Stuttgart, he positioned it as a 'factory for precision mechanics and electrical engineering.' Here is an introduction to Bosch: 1. Geographical Location: Bosch's headquarters is located in Stuttgart, southern Germany, with over 230,000 employees spread across more than 50 countries. Bosch is renowned worldwide for its innovative and cutting-edge products and system solutions. 2. World Ranking: On July 19, 2018, the Fortune Global 500 list was released, with Bosch Group ranking 75th. 3. Business Scope: Bosch's business scope covers gasoline systems, diesel systems, automotive chassis control systems, automotive electronic drives, starters and generators, power tools, household appliances, transmission and control technology, thermal technology, and security systems.

17

5

Share

What are the symptoms of a faulty throttle pedal sensor?

Throttle pedal sensor failure manifests as the inability to generate throttle opening signals to the ECU, causing the engine control unit to only inject fuel based on idle air intake. Below is additional information: Throttle Pedal: Also known as the accelerator pedal, it is part of the vehicle's fuel supply system. By adjusting its depression level, it controls the throttle valve opening, regulates air intake, and allows the ECU to manage fuel injection, thereby controlling engine speed. The throttle pedal position sensor detects how much the pedal is depressed, and the ECU uses this signal to rotate the throttle motor to a specific angle, ensuring proper air intake under various operating conditions. Throttle Pedal Operation Method: The vehicle engine's throttle is typically controlled by a pedal, also called the accelerator pedal, which regulates fuel supply. When operating the throttle pedal, place the right heel on the floor of the driver's compartment as a pivot point, gently press the accelerator pedal with the ball of the foot, and use ankle joint flexion to depress or release. Apply force softly when operating the pedal, ensuring smooth and gradual movements.

9

3

Share

What is the function of the accelerator?

The main function of the car accelerator is to accelerate the vehicle. Without pressing the accelerator, the car would maintain its original speed, which is very slow. Therefore, the primary role of the accelerator is to provide acceleration to the car. The lower the accelerator is pressed, the greater the fuel intake of the engine, resulting in higher speed. More related information is as follows: Accelerator Pedal: The throttle of a car engine is generally controlled by a pedal, also known as the accelerator pedal, which is a device for controlling the fuel supply to the engine. The operation of the accelerator pedal should be done with the right heel resting on the floor of the driver's compartment as a pivot, and the foot gently pressing on the accelerator pedal, using the ankle joint's extension and flexion movements to press down or release. When pressing or releasing the accelerator pedal, the force should be gentle, ensuring a light press and slow release. When starting the engine: Do not press the accelerator pedal all the way down; it is better to have it slightly above the idle throttle. When starting off, it is advisable to apply the accelerator slightly before the clutch engagement point, with the throttle opening at a moderate level. Releasing the clutch should be closely coordinated with pressing the accelerator, and the action should be swift.

11

4

Share

What is the general adjustment range for the low beam height of the Baojun 510?

The low beam height of the Baojun 510 is generally adjusted to levels 1-2. The numbers 0123 indicate the headlight height adjustment. Generally, the numbers represent the degree to which the light is adjusted downward—the higher the number, the more the light is lowered. Level 1 has the smallest downward adjustment, followed by level 2, while level 3 has the most significant downward adjustment. More details are as follows: 1. Basis for adjusting light height: The adjustment is mainly based on the number of passengers in the rear seats and the weight of cargo in the trunk. This is because the more passengers in the rear, the more the rear of the car will sink, causing the front of the car to rise accordingly. This raises the headlight height, potentially dazzling drivers of oncoming vehicles and distracting them, which can easily lead to traffic accidents. 2. Another function of light adjustment: It allows the vehicle's lights to maintain an appropriate height at all times, facilitating nighttime driving and adapting to varying road conditions. For example, when driving uphill, if the lights are not adjusted, they may illuminate the sky instead of the road. In such cases, the height should be lowered to ensure clear visibility of the road ahead.

15

5

Share

Can I still refuel when the fuel gauge reaches E?

The fuel tank still has some fuel left when it reaches E. When the yellow refueling light comes on, the vehicle can still travel approximately 50 kilometers. Below are relevant details about the fuel tank: Introduction: Refers to the container for storing fuel on aircraft or automobiles, which is a specialized container in hydraulic systems for storing hydraulic oil or hydraulic fluid. The fuel tank must have sufficient capacity; the suction pipe and return pipe should be inserted below the minimum liquid level to prevent air suction and oil splashing that creates bubbles; the distance between the suction pipe and return pipe should be as far apart as possible, with a partition set between them; to maintain oil cleanliness, the fuel tank should have a sealed cover with an air filter installed on it; the bottom of the fuel tank should be at least 150mm above the ground, and sufficient attention should be paid to the anti-corrosion treatment of the inner surface of the tank; Types: Fuel tanks can be divided into two types: open tanks and closed tanks. Open tanks have the liquid surface in contact with the atmosphere, with an air filter installed on the tank cover. Open tanks have a simple structure and are easy to install and maintain, making them commonly used in hydraulic systems. Closed tanks are generally used for pressurized tanks, filled with a certain pressure of inert gas, with the inflation pressure reaching up to 0.05MPa.

5

0

Share

What is the fuel consumption of the Geely New Vision?

This model has a fuel consumption of 6.2 liters per 100 kilometers for the manual transmission version and 6.8 liters per 100 kilometers for the automatic transmission version. Below is an introduction to the fuel consumption of the Geely New Vision: 1. Introduction one: When driving on roads with heavy traffic congestion, the car frequently needs to stop and go. Starting from a standstill requires significant acceleration, during which the engine needs to output substantial power. 2. Introduction two: When driving in congested traffic, the car's engine spends some time in idle mode. During idle mode, the car's mileage does not increase, but the engine continues to run, which also leads to an increase in the car's fuel consumption per 100 kilometers.

18

4

Share

What is the method for resetting the matching value of the rear suspension on the BMW 730?

Which Country Does Bosch Belong To?

What are the symptoms of a faulty throttle pedal sensor?

What is the function of the accelerator?

What is the general adjustment range for the low beam height of the Baojun 510?

Can I still refuel when the fuel gauge reaches E?

What is the fuel consumption of the Geely New Vision?

What are the techniques for smooth clutch and throttle coordination without jerking?

Is a midsize car a B-segment car?

Is a 1.5T engine a 3-cylinder or 4-cylinder?

What to do when the brake suddenly becomes hard and cannot be pressed down during startup?