What is the method for resetting the maintenance reminder on the Roewe RX5 MAX?
4 Answers
Roewe RX5 MAX maintenance reset method is: 1. Press the Roewe RX5's one-touch start button without stepping on the brake pedal or starting the engine; 2. Ensure the dashboard lights are on, confirming full vehicle power is connected; 3. Simultaneously press the phone button on the left side of the multifunction steering wheel and the OK button on the right side; 4. Press the down arrow button on the right side three times; 5. Press the OK button on the right side of the multifunction steering wheel to complete the maintenance reset. Taking the 2020 Roewe RX5 20T manual 4G Internet Million Edition as an example, this vehicle is a 5-door, 5-seat SUV with dimensions of 4556mm in length, 1855mm in width, 1719mm in height, and a wheelbase of 2700mm.
After my last oil change, the maintenance light was still on, which was really annoying, but resetting it is actually quite simple. First, turn off the car completely and disconnect the power. Locate the reset button on the dashboard—usually a small mileage or settings button nearby, but the exact position depends on the car model. Then, press and hold that button without releasing it, turn the key to the ON position (but don’t start the engine) to power up the dashboard, wait about seven or eight seconds, and the light will blink—then you can let go. If you press the buttons in the wrong order or the light remains on, the button might be faulty or there could be a system issue. In that case, don’t force it; check the owner’s manual for specific steps or just visit the dealership to have them handle it. Resetting after regular maintenance is important so the reminder system stays accurate, ensuring timely future maintenance to extend your car’s lifespan and save on repair costs. Try doing it yourself—it’s super convenient once you get used to it, but be careful not to tamper with other settings.
I've been driving the Roewe RX5 Max for several years and have to deal with the maintenance reset light after every service. Simply put, with the engine off, press and hold the small button on the left side of the dashboard—make sure you don't press the wrong one, it's usually near the odometer display. Then turn the ignition to the position where only the dashboard lights up without starting the engine. Keep holding the button for about ten seconds until the maintenance light flashes or goes off, then release it. It's easy to fail if you forget the sequence—I messed up once and the light stayed on, so I had to check the manual to confirm. Before doing this, make sure the car is completely powered off to avoid any safety risks. After resetting, the reminder will promptly tell you the next service time, preventing you from forgetting to change the oil and damaging the engine. If you're unsure, download the Roewe APP or check the tutorial on WeChat Mini Program—it's quite user-friendly, and the method is similar for both new and old cars.
I've got plenty of experience with resetting the maintenance light. First, turn off and shut down the vehicle, then press and hold the reset button on the dashboard. Next, turn the key to the ON position and wait for all dashboard lights to illuminate. Hold for about 5 to 10 seconds before releasing, and the light should disappear. If it doesn't work, it might be a button issue or wiring fault—check the manual or visit a professional shop. Resetting ensures the system restarts the countdown for timely maintenance, keeping your car in good condition with fewer repairs, saving you both hassle and money.
