What is the method for resetting the maintenance reminder on the BAIC Senova D50?
3 Answers
The method for resetting the maintenance reminder on the BAIC Senova D50 is: 1. Turn off the ignition switch; 2. Press and hold the trip meter reset button on the car's dashboard; 3. Turn on the ignition switch; 4. The odometer will begin counting down, and when the display shows 0000.0, release the button. The BAIC Senova D50 is a compact car with body dimensions of 4630mm in length, 1820mm in width, and 1820mm in height, a wheelbase of 2670mm, and a fuel tank capacity of 50 liters. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116PS and a maximum power output of 85kW.
I remember when I first drove the BAIC Senova D50, the maintenance light kept coming on, and I didn't know how to turn it off. After a few random attempts, I learned the correct method: first, turn off the engine and make sure the car is stationary, then locate the small button on the dashboard (probably the one that displays the odometer) and press and hold it firmly. Next, turn the key to the ON position (power on but don't start the engine), keep holding the button for 5-10 seconds, and release it only after seeing the light flash and go off. The process is simple, but new drivers might get scared, worrying they'll break something. The key point is that regular maintenance is more important—resetting the light is just a supplementary step. Don’t forget to change the oil on time and check the brake pads to keep the car running longer and safer. Now, I reset the light right after every maintenance to avoid trouble. I recommend new owners check the manual or ask a professional to demonstrate it once to avoid issues that might affect the electronic systems.
As a veteran driver with over 50 years of experience, maintenance reset is no challenge for me. The steps are straightforward: After turning off the engine, press and hold the multifunction button near the steering wheel (sometimes labeled SET or TRIP), turn the power to ACC position, and keep the button pressed for about 10 seconds until the indicator light goes off automatically. Be precise and patient with the timing to avoid system errors. I usually do this right after maintenance as a habit to prevent mistakenly thinking the service is overdue. On a related note, vehicle maintenance is far more important than just resetting the light—regularly changing filters and checking tire pressure can enhance safe driving. If you encounter complex situations, don't force it; visiting a repair shop for a computer reset is quicker. Remember, your car is your partner—take good care of it, and it'll run smoother.
