What is the method for resetting the Infiniti oil maintenance reminder?

1 Answers
Humbert
07/30/25 10:25am
Infiniti oil maintenance reset steps: 1. First, press the INFO button on the car's center console to enter the information interface. 2. Then, click the maintenance information button in the next interface. 3. Select "Engine Oil" to enter the setting interface. 4. Press the "-" button to reduce the maintenance interval from 10,000 km to 2 km, then click "Reset Travel Distance", then press the "+" button to reset it to 10,000 km, and finally exit the interface to complete the process. Here is some relevant information about Infiniti: 1. Infiniti is a luxury vehicle brand under Nissan, offering a full range of models including coupes, sedans, off-road vehicles, and SUVs. 2. The elliptical logo of Infiniti represents an infinitely extending road. The elliptical curve signifies infinite expansion and also symbolizes "the world"; the two straight lines represent the path to the pinnacle, symbolizing endless development.
Was this review help?
3
2
Share
More Forum Discussions

Is there any issue if I don't attend the scheduled Subject 4 test?

If you don't attend the scheduled Subject 4 test, it will be marked as a failure. There are no other consequences. Here is relevant information: 1. Concept: Subject 4 is an additional safety and civilization knowledge test beyond the Subject 3 road test. Officially, there is no Subject 4. 2. Test content: The exam consists of 50 questions, primarily in the form of case studies, images, and animations, with a perfect score of 100 and a passing score of 90. The main test content of Subject 4 includes safety and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
8
4
Share

Dehumidify the Car Interior with Cold Air or Hot Air?

When the air inside the car is humid, you should turn on the air conditioner to blow cold air. Below is a related introduction to the functions of car air conditioning: 1. Temperature Adjustment: This is the main function of car air conditioning. In summer, the cold air produced by the refrigeration system cools the interior of the car; in winter, except for large commercial vehicles that use independent combustion heaters for heating, other vehicles basically utilize the residual heat of the car for heating. 2. Humidity Adjustment: Humidity greatly affects the comfort of passengers inside the car. The humidity inside the car should generally be maintained between 30% and 70%. Ordinary car air conditioners do not have the function of adjusting the interior humidity. Only by using ventilation devices or the integrated heating and cooling air conditioners found in high-end luxury cars can humidity be adjusted. 3. Airflow Adjustment: The speed and direction of airflow significantly impact human comfort. If the air blows directly, the speed should be limited to a certain range when the temperature is suitable. The speed can be appropriately adjusted based on the passengers' living environment, age, health condition, and habits regarding cold and heat. 4. Air Purification: The quality of the air inside the car is an important guarantee of comfort.
5
5
Share

Can the Subject One Test Be Taken Twice in One Day?

The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" clearly stipulate that the Subject One test can be taken twice on the same day. If the first attempt is unsuccessful, a free retake is allowed for the second attempt. If the second attempt also fails, the Subject One test for that day is terminated, and the candidate must wait ten days before scheduling another test. Subject One, also known as the Subject One Theory Test or Driver Theory Test, is part of the motor vehicle driver's license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test format is computer-based, with a time limit of 45 minutes. To pass the Subject One test, a score of 90 out of 100 is required. The test consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point. If a candidate answers 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject One Test Content: Regulations on driver's licenses and motor vehicle management; road traffic conditions and rules; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One Test Notes: Candidates should dress appropriately for the test; no slippers are allowed. Electronic devices and bags are prohibited in the test room. Candidates must bring their ID cards and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the test room. Upon entering, candidates will be assigned seats at the identity verification station. After finding their seats, they can begin the test. Ensure the camera is aligned properly and follow test discipline. If the first attempt is unsuccessful, a retake is available on the same day. If the retake also fails, the candidate must pay to reschedule. After the test, queue to collect the score report and sign it. Unsigned score reports are considered invalid. There is no limit to the number of times Subject One can be scheduled. Each subject test allows one retake if the first attempt fails. If the retake is not taken or also fails, the test session ends, and the applicant must reschedule. For Subject Two and Subject Three, only five test attempts are allowed, and rescheduling must be done ten days later. If the Subject Three Safe and Civilized Driving Knowledge Test fails, the previously passed road driving skills test results remain valid. The driver's license test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject One refers to the road traffic safety laws, regulations, and related knowledge test. Subject Two refers to the field driving skills test. Subject Three is divided into two parts: road driving skills and safe and civilized driving knowledge tests. The safe and civilized driving knowledge test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, the official terminology (i.e., the Ministry of Public Security's Order No. 123) does not include the term "Subject Four."
12
5
Share

Can I claim insurance if I only have compulsory traffic insurance and get into an accident?

If you only have compulsory traffic insurance and get into an accident, you can still claim insurance. Here is some additional information about compulsory traffic insurance: 1. Coverage: Compared to the more than 20 exemption clauses in commercial third-party liability insurance, compulsory traffic insurance has fewer exemptions, such as "losses caused intentionally by the victim," "property loss of the insured," "related arbitration and litigation costs," and certain indirect losses caused by the accident. The coverage is much broader. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory traffic insurance will provide compensation within the liability limit, and there is no deductible or exemption rate. 2. Claims process: If the compulsory traffic insurance claim involves third-party injuries, fatalities, or property damage in a road traffic accident, the insured should first call the 120 emergency number, dial the 122 traffic police number, and then contact the insurance company's customer service hotline to report the incident. They should cooperate with the insurance company in surveying the scene and may request the insurance company to pay or advance the rescue fees based on the situation.
15
5
Share

What does pushauto mean in a car?

Pushauto in a car refers to a one-key start intelligent system. The one-key start device is part of a smart car, serving as a button mechanism that simplifies the ignition process and can also turn off the engine. This device can be retrofitted either at the original car key lock position or as an independent panel. Nowadays, many cars are equipped with this intelligent device to enhance market competitiveness. It can be installed in vehicles of both high and low configurations, although a standalone one-key start feature is not particularly meaningful. Its true intelligence shines when used in conjunction with the PKE intelligent system. Currently, domestic brands like Zuodun and Xiongbing produce intelligent one-key start systems. With this system, there's no need for the original car key or remote to unlock the car door; simply approaching within 2 meters of the vehicle will automatically unlock the doors.
12
1
Share

How many hours are required for Subject 2?

Subject 2 on-site manual transmission (C1) training requires 16 hours, while automatic transmission (C2) training requires 14 hours. Here is the relevant information: 1. Introduction: Subject 2, also known as the on-site driving skills test, includes five mandatory test items for cars C1 and C2: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions also include a sixth item: high-speed toll card collection. 2. Content: The test requires mastering basic driving operation essentials and having fundamental vehicle control abilities. It also demands proficiency in basic methods of on-site and in-field road driving, the ability to reasonably use vehicle control components, correctly control the spatial position of the vehicle, and accurately manage the vehicle's position, speed, and route.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.