What is the method for resetting data after replacing the battery in a Tiguan?

How to Add Windshield Washer Fluid to a Corolla?

To add windshield washer fluid to a Corolla, follow these steps: Open the engine hood of the Corolla, locate the windshield washer fluid reservoir at the front left of the engine compartment, open the reservoir cap, and pour in the washer fluid. In addition to its cleaning function, windshield washer fluid also has a lubricating effect. Taking the 2021 Toyota Corolla as an example, its body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm. The 2021 Toyota Corolla is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS and a maximum power of 85kW, paired with a continuously variable transmission (CVT).

12

0

Share

What is the working process of the ABS system?

The working process of the ABS system is: 1. During the conventional braking phase, the ABS does not intervene in brake pressure control, and the braking force on the wheels is determined by the driver's pedal pressure; 2. Simultaneously, the ECU uses wheel speed sensors to detect the rotational speed of each wheel, calculates the vehicle speed, and assesses tire and road conditions; 3. When it detects that a wheel's speed deceleration is too large, the slip rate is excessive, and the wheel is tending to lock up, the ABS enters the anti-lock brake pressure regulation process. The ABS system completes the regulation of braking force for each wheel based on hydraulic braking, consisting of a conventional hydraulic braking system, wheel speed sensors, an electronic control unit (ECU), and an ABS actuator.

12

0

Share

What is the reason for one side of the Mercedes taillight being on and the other side off?

This issue where one side of the Mercedes taillight is on and the other side is off is usually caused by a brake light bulb problem, typically due to a blown fuse or a short circuit in the bulb. Replacing the bulb can resolve the issue. Car Lights: Car lights are essential lighting devices for every vehicle. During driving, headlights not only serve an illumination function but also act as warning signals to alert oncoming vehicles about turning, stopping, etc. Maintenance: Since car headlights are installed externally, they are prone to damage. Therefore, regular maintenance is necessary during daily use. Ensure the headlight cover has good sealing to prevent water ingress, which can cause bulb short circuits. Also, keep the headlight cover clean to maintain optimal light transmission.

8

1

Share

Which factory produces the Xingyue L?

It is produced by Geely's Xi'an factory. Below is some information about the Xingyue L: 1. Dimensions: The Xingyue L measures 4770mm in length, 1895mm in width, and 1689mm in height, with a wheelbase of 2845mm. 2. Engine: The new vehicle is equipped with Volvo's Drive-E series VEP4 inline four-cylinder all-aluminum turbocharged mid-mounted direct-injection gasoline engine, also known as the 2.0T engine, with maximum output power of 218 horsepower and 238 horsepower, and maximum torque of 325 N·m and 350 N·m, respectively.

9

1

Share

How to Upgrade from National 5 to National 6 Standards for Vehicles?

Upgrading from National 5 to National 6 standards can be achieved by enhancing components such as the three-way catalytic converter and the engine ECU logic to improve the vehicle's overall emission standards. Relevant details are as follows: 1. It is not recommended to do so, as this involves the original factory calibration of the engine. Modifications that have not undergone rigorous testing may lead to unforeseen issues. The vehicle's emission standard is already documented in the factory-issued compliance certificate at the time of production. Even if the standard can be improved through modifications, it cannot alter the original record at the vehicle management office. 2. Optimizing the exhaust standards can make it easier for older vehicles to pass annual inspections. If the exhaust emissions fail to meet the standards, regardless of whether the vehicle is new or old, it will ultimately be prohibited from being driven on the road.

10

3

Share

What are the differences between the Envision and Envision S?

Here are the differences between the Envision and Envision S: 1. Different engines: The Envision is equipped with a 1.5T-L4 engine; the Envision S has a 2.0T-L4 engine. 2. Different maximum horsepower: The Envision has a maximum horsepower of 169ps; the Envision S has a maximum horsepower of 237ps. 3. Different maximum torque: The Envision has a maximum torque of 250nm; the Envision S has a maximum torque of 350nm. Below are the similarities between the two models: Both the Envision S and Envision are equipped with ABS anti-lock braking system, brake force distribution system, brake assist system, traction control system, and electronic stability control system.

20

3

Share

What is the method for resetting data after replacing the battery in a Tiguan?

How to Add Windshield Washer Fluid to a Corolla?

What is the working process of the ABS system?

What is the reason for one side of the Mercedes taillight being on and the other side off?

Which factory produces the Xingyue L?

How to Upgrade from National 5 to National 6 Standards for Vehicles?

What are the differences between the Envision and Envision S?

Is the Air Conditioning Set to Cooling Mode in Summer?

What are the reasons for seat belts not retracting?

What is the reason for the failure of the central control lock in the BAIC Huansu S3?

What are the common problems with the Leopaard CS10?