What is the method for replacing the thermostat in a Vios?

1 Answers
Nunes
07/28/25 7:22pm
The method for replacing the thermostat in a Vios is as follows: 1. Turn off the engine, open the front hood, and disconnect the negative terminal of the battery; 2. Remove the plastic cover outside the timing belt; 3. Dismantle the generator assembly; 4. Remove the water pipe and wait for the coolant to drain completely; 5. Remove the faulty thermostat and install the new one; 6. Reinstall the removed water pipe, generator, and timing plastic cover in their original positions, reconnect the negative terminal of the battery, and add new coolant. Taking the 2021 Vios as an example, it belongs to the compact car category with body dimensions of: length 4435mm, width 1700mm, height 1490mm, a wheelbase of 2550mm, a fuel tank capacity of 42 liters, and a curb weight of 1070kg.
Was this review help?
19
5
Share
More Forum Discussions

Is the Toyota Sienna 4WD a Full-Time Four-Wheel Drive?

Toyota Sienna 4WD is a full-time four-wheel drive, which means that at all times, the vehicle is propelled by four wheels independently. The Toyota Sienna is a 5-door, 8-seater MPV with body dimensions of 5175 mm in length, 1995 mm in width, and 1775 mm in height, a wheelbase of 3060 mm, and a fuel tank capacity of 68 liters. The Toyota Sienna is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 141 kW at 6000 rpm, paired with an electronic continuously variable transmission. The front suspension uses a MacPherson strut independent suspension, and the rear suspension employs a multi-link independent suspension.
9
5
Share

What is the fuel consumption of the new Ford Edge?

The new Ford Edge has a total of 6 models on sale, including the 2020 EcoBoost245 two-wheel-drive Enjoy version, the 2020 EcoBoost245 two-wheel-drive Shine version, and other 6 models equipped with a 248 horsepower engine. The NEDC fuel consumption per 100 kilometers is 7.3L. The fuel tank capacity of different models of the new Ford Edge varies. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 248 horsepower engine have a fuel tank capacity of 63L, and the distance that can be covered with a full tank of fuel is 63/7.3*100=863KM. The fuel consumption of a car is directly related to five major factors, namely driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that increase car fuel consumption are as follows: Driving habits: Rough driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement consume more fuel than those with smaller displacement because larger displacement generally means greater power, requiring more gasoline to burn and do work. Cars with greater self-weight will have higher fuel consumption because greater self-weight requires larger driving torque. Road conditions: Dirt roads, muddy roads, soft roads, mountain roads, etc. Driving on these roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts is not easy to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. At the same time, when the temperature is low, the engine computer will control the car to use higher RPM to warm up, which will also increase fuel consumption.
9
0
Share

What is the oil specification for the Buick Excelle?

The oil specification for the Buick Excelle is 5w30. The meanings represented in the oil specification are: 1. The number before the w indicates the low-temperature flow performance of the oil; 2. 5w means the oil can flow normally at minus 30 degrees Celsius; 3. 0w means the oil can flow normally at minus 35 degrees Celsius; 4. The number after the w indicates the high-temperature viscosity of the oil, with higher numbers representing higher viscosity. The Buick Excelle is a 4-door, 5-seater compact sedan with body dimensions of: length 4609 mm, width 1798 mm, height 1486 mm, a wheelbase of 2640 mm, and a fuel tank capacity of 44 liters.
7
1
Share

How to Deal with Corroded Car Battery Terminals?

Solutions for corroded car battery terminals include: 1. Rinsing with boiling water at 100 degrees Celsius; 2. After cleaning off the corrosion, apply petroleum jelly. A car battery, also known as a storage battery, is a type of battery categorized into standard batteries, dry-charged batteries, and maintenance-free batteries. Its working principle involves converting chemical energy into electrical energy. Methods for maintaining a car battery include: 1. Regularly clean the dust and grease from the battery terminals and apply specialized grease to protect the wiring harness; 2. Periodically inspect the battery's components and connecting circuits; 3. Minimize the use of in-car electrical devices after turning off the engine; 4. Check the battery through the inspection window and replace it periodically; 5. Start the car regularly if it is not used for an extended period.
15
0
Share

How to Adjust the Rearview Mirror of Jetta?

The method to adjust the rearview mirror of Jetta is as follows: 1. Rotate the button to the L position, then move the button up, down, left, or right to adjust the angle of the left mirror; 2. Rotate the button to the R position, then move the button up, down, left, or right to adjust the angle of the right mirror; 3. Once adjusted to the desired position, rotate the button to the middle to close the adjustment. Taking the 2019 Jetta VA3 Manual Entry Edition as an example, it is a compact car under FAW-Volkswagen, with body dimensions of: length 4501 mm, width 1704 mm, height 1469 mm, wheelbase of 2604 mm, and a fuel tank capacity of 52.8 liters.
9
4
Share

How many kilometers does the Tiguan L need for maintenance?

Volkswagen Tiguan L maintenance cycle is every 5,000 kilometers or every six months, whichever comes first. The following is a partial introduction about car maintenance: 1. Definition of maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Content: Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service cycle.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.