What is the method for replacing the tail light bulb on a Lavida?
3 Answers
The method for replacing the tail light bulb on a Lavida is: 1. Peel back the interior felt covering in the tail light section of the trunk to expose the tail light wiring; 2. Remove the damaged bulb; 3. Install the new bulb and return it to its original position. Taking the 2021 Lavida as an example, it is a compact car with body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. The 2021 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW.
Changing the tail light bulb on a Lavida is actually not difficult. I've done it myself several times. First, park the car on a flat surface, turn off the engine, and engage the handbrake—safety first. Then, open the trunk and locate the small plastic cover on the inner side of the tail light assembly. Gently pry it open with your hand, being careful not to use too much force to avoid damage. Behind the cover, you'll see the connector for the bulb socket—just unplug it gently. Next, twist out the old bulb by holding its base. Remember, it's a halogen bulb, either H15 or P21W, but check the manual to confirm the exact model to avoid mistakes. When handling the new bulb, avoid touching the glass with your bare hands, as oils can shorten its lifespan. Use gloves or a cloth to insert and twist it into place. Reconnect the wiring, test the light to ensure it works, and then reattach the cover. The whole process takes about 15 minutes, so don’t rush if it’s your first time. Keeping some spare bulbs on hand makes it even easier.
I had a smooth experience replacing the tail light bulb on my Lavida. Make sure the car is completely powered off, and after opening the trunk, you can gently pry open the cover panel next to the tail light to access the interior. Once the wiring is unplugged, the bulb is of the twist-type—turn it counterclockwise to loosen and remove it. The key is not to mistake the model, such as H21W. When buying bulbs, stock up on standard spare parts at auto repair shops or online. The first time I replaced it, I was clueless and ended up damaging the socket, so I recommend wearing insulated gloves to prevent short circuits. After installation, check that the light color and brightness match to avoid fault alerts. Remember, regular replacement can extend the life of the light assembly, and spending just ten bucks can save you the hassle of repairs.
