What is the method for replacing the key battery of the Lynk & Co 03?
2 Answers
Method for replacing the key battery of the Lynk & Co 03: 1. Remove the protective cover and key ring from the key; 2. Flip the car remote key to the back, the battery is located under the back cover on the side of the key ring; 3. Turn the key sideways to see a gap, insert a flat-head screwdriver into the gap and move it to both sides to gradually expand the gap and pry open the entire back cover; 4. Use your hand to pry open the back cover in the direction of the closed end, remove the back cover to see the battery inside, replace the new battery and install it in the reverse order. The Lynk & Co 03 is the first sedan product of the Lynk & Co brand and also the first sedan built on the CMA basic modular architecture. In terms of body size, the Lynk & Co 03 has a length, width, and height of 4639mm, 1840mm, and 1472mm respectively.
I just replaced the battery in my Lynk & Co 03 key fob myself, and it was quite simple. First, prepare a new CR2032 coin cell battery, which can be easily purchased at supermarkets or online at an affordable price. On the side of the key fob, there's a small notch—use a coin or a small screwdriver to gently pry it open, revealing the battery compartment. When removing the old battery, remember its orientation (usually with the positive side facing up) and install the new battery the same way. Simply press the back cover firmly to close it, then test the lock/unlock functions afterward. It's recommended to replace the battery every two years to prevent unexpected failures. Doing it yourself saves money and hassle, but be careful not to use excessive force to avoid damaging the key fob casing—the whole process takes about five minutes. To prolong its lifespan, avoid exposing the key to water or high temperatures in daily use.
