What is the method for replacing the fuel filter element on the City?
4 Answers
The method for replacing the fuel filter element on the City is: 1. Close the inlet valve of the filter, unscrew the end cover bolts, and open the end cover; 2. Open the drain valve to completely drain the dirty oil; 3. Loosen the fastening nut at the top of the filter and remove the old filter element vertically upwards; 4. After replacing the filter, close the drain valve and secure the end cover with bolts. Taking the 2019 City as an example, it belongs to the compact car category with body dimensions of: length 4450mm, width 1695mm, height 1477mm, wheelbase 2600mm, and fuel tank capacity of 40 liters. The 2019 City features a MacPherson strut front suspension and a torsion beam rear suspension.
I usually do my own car repairs, and changing the gasoline filter on the City is quite simple. First, make sure the engine is turned off and cooled down, find a ventilated area away from open flames—safety is the top priority. You'll need a wrench and a new filter, located at the rear of the chassis. When lifting the car, use a jack stand for stability. Loosen the connecting pipe joint; some gasoline may leak out, so place a container to catch it. Remove the old filter, remembering the arrow direction points toward the fuel pump. Install the new one, ensuring the rubber seal is properly seated and not crushed. Tighten the screws but don’t overdo it. After replacement, start the engine to check for leaks. The whole process takes about 20 minutes. Replacing it every 20,000–30,000 km keeps the engine healthy, improves performance, and saves fuel. Beginners are advised to watch video tutorials—basic wrenches are all you need, saving money while learning a skill.
As someone who frequently DIYs car repairs, I like to start with tools when replacing the Fit's fuel filter: prepare a wrench, new filter, gloves, and rags. The location is under the chassis near the rear wheel—safety first when lifting the car. After the engine is off and cooled, place a rag to absorb fuel before loosening the pipe fittings. When removing the old filter, avoid damaging the fuel lines, and check the directional arrow when installing the new one. Apply even force when tightening—don’t over-tighten. After replacement, start the engine to check for leaks—if there’s a leak, recheck the O-ring. The process takes about half an hour, with low material costs of just tens of yuan, saving hundreds in labor fees. Accumulated impurities in the filter affect performance, so regular replacement ensures smooth fuel supply. Beginners should take it slow, prevent fuel splashes, and prioritize ventilation and fire safety—absolutely crucial. DIY repairs are fun and suitable for car owners who love tinkering.
Replacing the gasoline filter is part of the regular maintenance for the Fit, which I do every 20,000 kilometers. Its role is to filter impurities and protect the engine. Not replacing it can lead to weak power or malfunctions. The method is simple: with the engine off and cold, the tools needed are just a wrench and the new filter. It's located under the chassis; safely lift the car, loosen the pipes, and replace the new gasket. The key point is depressurization—start the engine, then turn it off and wait a few minutes. After replacement, the engine responds better and fuel consumption is lower. Doing it yourself saves money, but don't forget fire safety and ventilation. Regular maintenance extends the car's lifespan—it's simple and practical.
