What is the method for replacing the cabin air filter of the Baojun 510?
2 Answers
Baojun 510 cabin air filter replacement method: 1. First unscrew the two external plastic screws; 2. Then remove the sponge protective cover; 3. Push hard on the filter holder below to remove it; 4. Take out the old filter, replace it with a new one, and reassemble by reversing the previous steps. The Baojun 510 is a compact SUV launched by SAIC-GM-Wuling targeting young consumers, with body dimensions of 4220mm in length, 1740mm in width, and 1625mm in height, and a wheelbase of 2550mm. The Baojun 510 is equipped with a 1.5L naturally aspirated engine across the entire lineup, delivering a maximum output of 112 horsepower and a peak torque of 135 Nm.
The method to replace the Baojun 510's cabin air filter is quite simple for someone like me who often works with their hands. It's usually located behind the glove box. First, open the glove box and check if there are any securing screws or clips inside. After unscrewing or releasing them, you'll see the filter housing. Carefully remove the old filter—it might be dirty and dusty—and take the opportunity to clean the inside of the housing. Before buying a new filter, make sure the model matches the Baojun 510, and don't skimp on quality by choosing a cheap, inferior one. When installing the new filter, pay attention to the arrow direction, aligning it with the airflow, and gently push it into place. Finally, reassemble the glove box and close it—job done. The whole process takes about ten minutes, saving you the hassle of visiting a repair shop and improving your AC's efficiency. Regularly replacing the filter is important, typically every six months or 10,000 kilometers, to reduce dust and odors in the car and protect your family's respiratory health. I recommend giving it a try yourself—all you need is a screwdriver, and with a bit of practice, you'll get the hang of it.
