What is the method for replacing the brake light on the Changan CS35?

[Derek]

The method for replacing the brake light on the Changan CS35 is as follows: 1. Remove the protective panel: The brake light switch is located above the brake pedal, with a spring contact pressing against the brake pedal linkage. 2. Disconnect the wiring: After removing the protective panel, the brake light switch can be seen above the brake pedal. 3. Remove the switch: This switch is of a rotating latch type and cannot be pulled out by force. 4. Install the switch: Insert the head of the switch into the latch hole. 5. Reinstall the protective panel. The Changan CS35 brake light is installed at the rear of the vehicle and is primarily red in color to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the front vehicle brakes, even in low visibility conditions, thereby helping to prevent rear-end collisions.

[SanMariana]

Last time my brake light went out, it was at night when a friend pointed it out to me while driving—what a scare! I took action immediately: opened the trunk of my Changan CS35, noticed a small latch on the left rear light cover panel, and gently pried it open with my hand to reveal the bulb socket inside. The old bulb was a dual-filament type, which I removed by twisting counterclockwise. The new bulb, a matching 1156 model bought online, was inserted and twisted clockwise to secure. For testing, I had someone step on the brake to check if it lit up. Reattaching the cover panel was as simple as snapping it back into place. The whole process took me about fifteen minutes to do myself. The key point is to wear gloves to avoid burns or scratches—the bulb was cheap, just over ten yuan. From now on, I’ll prioritize trying to fix brake light issues myself to save money and gain experience. Regularly checking your lights prevents nighttime road hazards, ensuring safety for yourself and others. The Changan CS35’s design is quite DIY-friendly—don’t be lazy and miss out on this skill.

[McGriffin]

Changing the brake light on a Changan CS35 is a piece of cake for me, as I'm quite experienced with cars. All you need is a screwdriver: open the trunk, loosen the screws near the light cover with a flat-head screwdriver, and remove the protective cover. Among the several bulbs inside, the brake light is located in the center. The old bulb can be easily removed with a twist and pull. Make sure to choose a new bulb with the correct specification, matching the 1156 model, and don’t skimp on quality by buying the wrong type. After installation, test the brightness by stepping on the brake pedal. Important tips include ensuring the bulb socket has good contact to avoid loose connections that could lead to circuit breaks. Regularly checking the brake system can extend its lifespan. Doing it yourself is faster and saves you hundreds compared to visiting a repair shop, plus it’s a great opportunity to teach kids some basic car knowledge and instill safe driving habits from a young age. Making routine maintenance a habit ensures safer and more worry-free travels.

[OSimon]

Brake lights are crucial for driving safety, so replacement must not be taken lightly. In the trunk of the Changan CS35, locate the brake light position and remove the small protective cover to access the bulb socket. Replace the old bulb with a new matching one, such as the 1156 specification. Test by pressing the brake pedal to ensure proper illumination. The DIY process takes just minutes with simple tools—often just your hands. Key tips include cleaning dust after replacement to avoid light interference and checking bulb lifespan approximately every two years. Preventing issues ensures safe night driving and avoids accidents. Cultivate a habit of regular inspections to enhance safety awareness. It's a cost-effective solution—don't delay small tasks.