···
Log in / Register

What is the method for replacing the brake light on a Volkswagen Lavida?

1 Answers
ElainaAnn
09/02/2025, 04:17 AM

Replacing the brake light on a Volkswagen Lavida involves the following steps: Open the rear trunk, locate a white screw on the back of the taillight, unscrew it, disconnect the plug, remove the old brake light, and install the new one. The brake light, installed at the rear of the vehicle and colored red, enhances the penetration of the light source. This ensures that vehicles behind can easily notice when the front vehicle brakes, even in low visibility conditions, thereby helping to prevent rear-end collisions. Taking the 2019 Volkswagen Lavida as an example, it is a compact car with body dimensions of 4613mm in length, 1765mm in width, and 1460mm in height, a wheelbase of 2610mm, and a curb weight of 1210kg.

Was this review help?
8
1
Share
More Forum Discussions

How to Handle Points Deduction for Chengdu Driver's License?

If the points deducted from the driver's license reach or exceed 12 but are less than 24. For Class C driver's license: The driver's license will be temporarily suspended, and the driver must retake the subject one test. The driver will have their license temporarily suspended and must report to the traffic management department within 15 days to attend a 7-day traffic regulation study session. After completing the study, they must retake the subject one test. Only upon passing the test can they regain their driver's license. If they fail the test, they must continue studying and retaking the test. Driving during this period is considered unlicensed driving. Refusing to attend the study session or take the test will result in the traffic management authority announcing the suspension of the driver's license. For Class A and B driver's licenses: Direct downgrade. The driver will have their highest permitted driving category revoked and must complete the downgrade and license replacement procedures within 30 days. 2. If 12 points are deducted during the probationary period. For Class C driver's license: The probationary driving qualification for the permitted vehicle type will be revoked. For Class A and B driver's licenses: Downgrade and revocation. The driver will have their probationary driving qualification for the permitted vehicle type revoked. If the revoked driving qualification is not for the highest permitted vehicle type, the highest permitted driving category will also be revoked. Additionally, if 6 or more points but less than 12 points are deducted during the probationary period, the probationary period will be extended by one year. 3. If points deducted equal or exceed 24. The driver must attend a 7-day traffic regulation study session, retake the subject one test, and within 10 days of passing, take the subject three test. Only after passing both tests can they resume driving.
3
0
Share

How to Activate the Start-Stop Function in Audi Q3?

Here are the steps to activate the start-stop function in Audi Q3: 1. First, use the one-touch key to start the vehicle's engine with one press; 2. Then, check the instrument panel to ensure there are no fault indicators displayed; 3. Locate the engine start-stop button below the center console panel; 4. After finding the button, press the switch, and the screen will display the engine start-stop indicator, usually represented by a circular arrow with an 'A' inside; 5. Once activated, when you press the brake and the vehicle comes to a complete stop, the engine will shut off. Releasing the brake will restart the engine.
20
5
Share

What tires are suitable for the Ford Kuga?

Ford generally uses Goodyear or Maxxis tires, with Michelin for high-end models and Kumho for budget options in special cases. The main functions of tires are as follows: 1. To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 2. To transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and off-road capability; to work with the car's suspension to mitigate impacts during driving and dampen resulting vibrations; 3. To prevent severe vibrations and early damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and fuel economy.
17
0
Share

What measures should be taken in case of a sudden tire blowout on the highway?

Highway tire blowout should take the following correct measures: 1. When aware of a blowout, immediately release the accelerator pedal, firmly grip the steering wheel with both hands, and strive to prevent the steering wheel from turning on its own, keeping the car moving straight in the original direction. If the car has already veered, avoid overcorrecting, as it is often difficult to correct effectively. 2. While maintaining control of the direction, quickly shift to a lower gear to utilize the engine's braking effect to slow the vehicle. Do not use the brake to stop the vehicle until the engine's braking effect has sufficiently reduced the speed, to avoid the risk of the vehicle skidding sideways or rolling over. 3. Gently press the brake pedal to slow down gradually and pull the car over to the roadside slowly. Avoid making sudden steering movements to change direction. Do not slam on the brakes, as this may cause loss of control or rollover due to a shift in the vehicle's center of gravity. If the rear tire blows out, it is relatively easier to control. Often, people instinctively slam on the brakes during a blowout, which frequently leads to accidents.
5
1
Share

How to Solve the Abnormal Noise Issue in Soueast DX3?

Soueast DX3 experiencing abnormal chassis noise, please first check the following two points: 1. Whether the noise occurs when the engine is cold but disappears when warm, or happens in winter but not in summer. 2. Whether the noise appears when the four wheels bear uneven loads but disappears under balanced conditions. Other possible causes of abnormal noise: 1. Worn brake pads - As consumable parts, brake pads should not be thinner than 3mm. If they wear beyond this limit, the metal part of the pad will contact the brake disc, producing harsh noise and damaging the disc. Higher-end vehicles usually have sensors that alert drivers when the pads wear out. 2. Improper installation of the brake pad metal backing plate - Incorrect installation, reverse installation, or missing backing plates when replacing new brake pads can also cause brake noise. 3. Exhaust pipe noise is typically caused by pipe aging, damage from stones, or worn gaskets at connection points. A leaking exhaust pipe may produce a sports car-like sound during driving, especially when the muffler leaks. The noise intensifies with deeper throttle application. Solutions: Replace the affected exhaust pipe section or repair leaks with arc welding. If the leak is at a connection point, replace the gasket.
11
2
Share

Is the left pedal in an automatic car the accelerator or the brake?

In an automatic car, the left pedal is the brake. Below is relevant information about the positions of the accelerator and brake: 1. Manual transmission cars have a clutch pedal in addition to the brake and accelerator, arranged from left to right as clutch, brake, and accelerator. Automatic transmission models eliminate the clutch pedal, making operation more convenient, with the pedals arranged from left to right as brake and accelerator. 2. The accelerator and brake pedals in automatic cars are installed on the right side, making it awkward to control with the left foot. In fact, designers intended for drivers to use only the right foot to control both the brake and accelerator, which is the correct way to operate an automatic car. In emergencies, people may panic, slowing down their brain's ability to process information. If both feet are used to control the accelerator and brake simultaneously, there is a risk of mistakenly pressing the accelerator instead of the brake, or pressing the accelerator first and the brake later, which could lead to serious consequences. 3. During normal driving in an automatic car, the left foot should rest naturally in the left footwell, while the right foot controls the accelerator and brake. However, there is one situation where both feet may be needed: when starting on a steep slope, the left foot can control the brake to prevent the car from rolling back, while the right foot controls the accelerator for a smoother and quicker start.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.