What is the method for replacing the battery in the Borui car key?
3 Answers
The method for replacing the battery in the Borui car key is: 1. Push the marked switch upwards from the tail of the key to remove the mechanical key; 2. Use the mechanical key to press against the marked position and gently open the key casing; 3. Use a card to pry the old battery from the gaps on both sides and remove it; 4. Replace with a new battery, reinstall the casing, and return the mechanical key. Taking the 2021 Borui Navigation Edition as an example, its body dimensions are: length 4986mm, width 1861mm, height 1513mm, wheelbase 2870mm, trunk capacity 502l, and body weight 1660kg.
I often change my car key battery myself, and replacing the battery for the Borui key is quite simple. First, if the remote control distance becomes shorter after prolonged use, it may indicate the battery is running low. The battery model is usually a CR2032 coin cell, which can be purchased at supermarkets or auto repair shops. Use a small flat-head screwdriver or a coin to gently pry open the back cover of the key, being careful not to apply too much force and scratch the plastic. When removing the old battery, remember the positive side should face up, otherwise it won't work if installed backward. After inserting the new battery, align it with the slot and press firmly, then reattach the cover, ensuring the clips are properly aligned. Finally, test by pressing the unlock button to confirm the light turns on. Remember to check the battery life annually to avoid sudden failure while driving. This method saves both time and money, and I've done it several times without any issues.
A while ago, there was an issue with my car key—the remote function weakened, so I replaced the battery. The Borui key has a seam on the back, and I used a fingernail or a thin card to slowly pry open the casing, revealing a small round battery inside. Before removing the old battery, I took a photo to note its orientation in case I forgot. When inserting the new CR2032 battery, I made sure the positive side faced upward and pressed it gently. While reassembling the casing, I aligned the clips carefully. During testing, I pressed the button multiple times to check if the response was quick. I bought the battery from an official store to avoid low-quality products, and after replacing it, I kept a spare in the car for safety. Regular checks can prevent unexpected issues—mine worked flawlessly for two years. The whole process just requires a bit of patience and care, so there’s no need to panic.
