What is the method for replacing the air filter in the 2019 X-Trail?

2 Answers
McCharles
07/25/25 1:32pm
The method for replacing the air filter in the 2019 X-Trail is as follows: 1. Pry open the side panel of the glove box, use tools to remove the four screws of the glove box, and take off the glove box; 2. Locate the black box inside, pry open the cover of the box, and remove the old air filter; 3. Install the new air filter and secure the cover; 4. Reinstall the glove box and attach the side panel. Taking the 2019 X-Trail as an example, it belongs to the compact SUV category with body dimensions of: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, fuel tank capacity 65l, and curb weight 1480kg. The 2019 X-Trail features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 154PS, maximum power of 113kW, maximum torque of 204Nm, paired with a 7-speed continuously variable transmission.
Was this review help?
1
4
Share
DelMariana
08/11/25 8:47pm
I just replaced the cabin air filter on my 2019 Nissan X-Trail by myself, and the process was quite straightforward though requiring some patience. First, empty the glove compartment on the passenger side, then locate the two clip stoppers on either side of the compartment. Press them down with your fingers to easily remove the entire glove box. Behind it, you'll find a plastic cover—just pry it open to access the old filter. Pay attention to the arrow direction when removing the old filter, and make sure to install the new one in the same orientation, otherwise, the airflow will be incorrect. Finally, reattach the cover and push the glove box back into place until it clicks. The whole process takes about 15 minutes. I replace it every six months—it’s cost-effective and ensures good air quality. A dirty cabin air filter can develop a musty smell, affecting respiratory health inside the car. Remember to turn off the AC before replacing it and handle the clips gently to avoid damage. I recommend buying filters online from reputable brands—they’re affordable and practical.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

Where to strike the car window with a safety hammer?

The striking position for a safety hammer is at the four corners of the car window glass. The following is an introduction to safety hammers: 1. Design concept of safety hammers: The pull-handle safety hammer combines the car's interior safety handle with an escape hammer in its design. In an emergency, pressing a button releases the handle, which can then be used as a safety hammer, making it quicker to break the window and increasing the chances of escape. 2. Operation method of safety hammers: Pick up the safety hammer and strike the four corners of the tempered glass, avoiding the center as it is the strongest part. Since some glass has a film, it may not fall off immediately after breaking; you can kick it open. Once the glass falls off, exit the vehicle promptly and in an orderly manner, then move to a safe location.
2
3
Share

How to Read the Production Date of Automotive Glass

Method for checking the production date of automotive glass: There is a code at the bottom left or right corner of the car window glass. The last or second last row contains a number and several small black dots indicating the production date of the glass. The number represents the production year of the glass, and the small black dots represent the production month. Below are detailed explanations: 1. Meaning of the number: The number indicates the production year of the glass, representing the last digit of the year. For example, if the glass shows the number 8, and the vehicle's manufacturing date is in 2007 or 2008, then the glass with the number 8 was likely produced in 2008. 2. Meaning of the small black dots: The small black dots indicate the production month of the glass. If the dots are in front of the number, subtract the number of dots from 7; if the dots are behind the number, subtract the number of dots from 13. The result will be the production month of the glass.
9
3
Share

Should I Report Broken Car Window Glass to Insurance?

Broken car window glass requires insurance coverage. Below is relevant information about auto insurance: 1. Compulsory Traffic Accident Liability Insurance: This is a mandatory coverage that all vehicle owners must purchase. Its only drawback is the relatively small compensation amount. 2. Third-party Liability Insurance: This serves as a supplement to compulsory insurance. Both cover third-party compensation, but payouts are determined based on the policyholder's degree of responsibility in an accident. Many auto insurance policies contain deductible waiver clauses where insurers waive certain deductibles. 3. Vehicle Damage Insurance: This covers compensation for damage to your own vehicle, but not all damages are covered. For instance, standalone damage to glass, external rearview mirrors, or tires (including rims) isn't covered. Additionally, insurers don't compensate for damages caused by earthquakes, drunk driving, or hit-and-run incidents.
3
3
Share

What are the categories of BMW Mini?

BMW Mini has five models: Copper, Tattoo, Clubman, Countryman, and Paceman. Cooper: The Mini-Cooper features a front-engine, front-wheel-drive layout with a 1.6L four-cylinder 16-valve engine. The lightweight body results in slightly insufficient power. The 0-100km/h acceleration time is 9.2 seconds. The Mini-Cooper is equipped with a four-wheel independent sports suspension system and a multi-link rear suspension system, providing excellent road handling. Tattoo: The Mini-Tattoo is derived from the Mini-Cooper-Fun model. In terms of appearance, the Mini-Tattoo features a chili red body, with the roof, rear, and sides adorned with tattoo patterns combining the Union Jack, symbolizing Mini's pure British heritage, and the black-and-white checkered flag representing racing legends. Clubman: Debuted at the 2008 Beijing Auto Show, the Mini-Clubman retains clear Mini styling with irresistible innovative charm. Its unique features are very distinct. The car's roofline extends over all three pillars, smoothly blending into the exterior. The striking rear section features an innovative split tailgate: the two doors can be set to open in any direction, and their contrasting color frames make them a highlight of the exterior. Countryman: The Countryman is the first SUV model launched by Mini. It is also the first Mini model with a body length exceeding 4 meters and the option of all-wheel drive. Like other Mini models, the Countryman will be available in two different versions upon release, differing in appearance and power. In terms of appearance, the Cooper-S-Countryman features a mesh grille at the front, with square decorative frames added on both sides of the lower air intake. The circular dual exhaust pipes at the rear and the spoiler above the rear window enhance the sporty feel. Paceman: The Paceman is powered by a 1.6L twin-turbocharged engine, tuned by JCW, delivering a maximum output of 211 horsepower and 260 Nm of torque. This engine also features an Overboost function, a super mode that increases the maximum torque to 280 Nm.
3
5
Share

What to Do If the Car Antenna Breaks?

If the car antenna breaks, you need to check whether it affects some functions of the car, such as radio signals and GPS signals. If there is no impact and you don't mind the aesthetic effect, you may not need to replace it; if there is an impact, you should replace it promptly. You can buy an antenna at an auto parts store and install it. Here is some information about car antennas: 1. Definition of Car Antenna: A car antenna, also known as a vehicle antenna, is generally used for the car's radio and communication devices. It can be divided into built-in and external antennas. 2. Classification: Radio and communication antennas mainly include AM/FM antennas, soft PCB digital antennas, AM/FM/TV antennas, etc. Depending on different functions and uses, the frequency of the antennas used also varies.
19
4
Share

What Causes Loud Noise When Closing Car Doors?

Here are the specific reasons for loud noise when closing car doors: 1. Worn door hinges: Wipe off surface dust with a cloth or tissue, then use a cotton swab dipped in a small amount of lubricating oil to repeatedly apply to the hinge and circled areas of the door limiter. Open and close the door repeatedly, and repeat the steps of applying oil and operating the door until the noise disappears. Avoid applying excessive lubricant to prevent contamination of other door parts. If the issue persists, it may be due to wear and require replacement of new hinges and limiters. 2. Aging door seals: Check if the door seals are aging. As seals are rubber products, regularly clean dust and rainwater from seal gaps to prevent aging. Since seal gaps easily accumulate sand and dust, frequently clean them with a brush and apply a layer of high-permeability protective agent to prevent seal aging. If the seals are severely damaged or significantly aged, replacement with new seals is necessary.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.