What is the method for replacing the air filter element of the new Tiida?

What is the horsepower of the Leiling?

The Leiling has 116 horsepower and 98 horsepower, equipped with two engines: a 1.2-liter turbocharged engine and a 1.8-liter naturally aspirated engine. The 1.2-liter turbocharged engine delivers 116 horsepower, while the 1.8-liter naturally aspirated engine produces 98 horsepower. Additionally, this car is equipped with an electric motor that provides 72 horsepower. The Leiling is a compact sedan under the Toyota brand, with body dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. In terms of exterior design, the front face of the Leiling features more lines compared to the previous model, with raised front fenders on both sides and headlights adopting a hook-like design. The rear has undergone minor styling changes, featuring a black horizontal chrome strip that runs across the taillights, and the lower black trim wraps around the rear, moving away from its previous purely family-oriented image.

10

2

Share

What Are the Symptoms of Air Leakage in the Brake Air Pump?

Symptoms of air leakage in the brake air pump: poor braking performance or no braking effect; visible oil leakage at the external connections of the vacuum pump from the exterior; slow or non-returning brake pedal. Below is an introduction to brake air pressure: 1. Influencing factors: Insufficient compressed air storage in the vehicle's air reservoir leads to inadequate air supply from the brake valve; air leakage in the brake valve pipeline or blockage in the air circuit can result in insufficient compressed air pressure generated by the braking system during braking. 2. Air pressure principle: During air pressure braking, the driver presses the brake pedal, opening the brake control valve and connecting the passage from the air reservoir to the brake chamber. This allows the compressed air in the air reservoir to pass through the brake control valve into the brake chamber. Sufficient air pressure pushes the brake chamber push rod outward, driving the brake adjustment arm to rotate the cam. The rotation of the cam causes the brake shoes to expand and press against the brake drum, thereby braking the wheel.

16

3

Share

Does Jianghuai Automobile have new energy vehicles?

Jianghuai Automobile has new energy vehicles. Here are the specific details about Jianghuai's new energy vehicles: 1. Jianghuai iEV6E: The iEV6E includes two versions: an upgraded version and a sport version. The upgraded version is adjusted based on the 2017 standard model, with the interior and exterior largely the same as the older version, offering a range of 255km. The sport version is a completely new model, slightly more expensive, but with stronger battery endurance. 2. Jianghuai iEV7S: The Jianghuai iEV7S is equipped with an electric motor that delivers a maximum power of 85kW and a peak torque of 270Nm, paired with a 39kWh ternary lithium liquid-cooled battery pack. It accelerates from 0-100km/h in 11 seconds. In fast-charging mode, the battery can be charged from 0 to 80% in 1 hour; in slow-charging mode, it takes 7 hours.

18

1

Share

How deep can the BYD Qin hybrid wade through water?

BYD Qin hybrid's wading depth ranges between 110mm to 150mm, depending on automatic suspension adjustments. Below is additional information about the BYD Qin hybrid: 1. Hybrid + Economy Mode: The engine is not used when speed is below 40KM and battery level is above 15%. When exceeding 40KM, the engine automatically starts, providing only 10% power to the vehicle. The controller gradually increases the motor's current while charging the battery. If speed remains below 40KM but battery level drops under 15%, the engine will start but only idle to recharge the battery without powering the vehicle. Once battery charge exceeds 25%, the engine automatically shuts off as long as speed stays under 40KM. 2. Hybrid + Sport Mode: The engine operates like conventional cars, requiring manual start/stop. It delivers 100% power to the wheels while the motor operates at maximum capacity.

12

4

Share

Can You Drive When Water Submerges the Exhaust Pipe?

Yes. You can start the ignition and let the car idle without pressing the accelerator. At this time, the exhaust pipe will discharge a lot of water until it stops dripping. Below are some relevant details: 1. Water Wading Depth: The standard water wading depth for cars is generally considered to be half the height of the wheel. This standard, proposed by some experienced drivers or experts, is for reference only. It's best to judge based on the actual situation. 2. Composition of the Car Exhaust System: The car exhaust system usually consists of the exhaust manifold, exhaust pipe, flexible connection (bellows), three-way catalytic converter, and muffler. The exhaust system is almost horizontally arranged along the chassis, with the exhaust manifold connected to the engine. The exhaust manifold is positioned higher vertically compared to other components of the exhaust system. What the car fears most is water entering the engine. The likelihood of water entering the engine through the exhaust is very low. What should be checked more carefully is whether the engine air intake at the front of the vehicle has been submerged in water.

6

1

Share

What are the causes of brake dragging?

Brake dragging can be caused by the following reasons: 1. Poor return of the brake master cylinder: This condition usually manifests as simultaneous braking on multiple wheels. If it is determined to be a master cylinder failure, a new master cylinder must be replaced (it is not recommended to reuse the master cylinder after repair). Brake line blockage: This typically occurs on a single wheel, requiring replacement of the affected line and investigation of the blockage cause. 2. Brake caliper (brake cylinder) failure: Poor return of the brake caliper, which may be caused by rust on the piston of the caliper cylinder due to possible moisture in the brake fluid, preventing smooth return. The piston needs to be cleaned, and in severe cases, the entire caliper assembly must be replaced. Sticking of the caliper guide pins: Due to aging or damage of the guide pin dust boots, dust and moisture can enter the pins, causing rust and preventing the brake caliper from returning promptly. The rust must be cleaned, the guide pins lubricated, and the damaged dust boots replaced.

10

3

Share

What is the method for replacing the air filter element of the new Tiida?

What is the horsepower of the Leiling?

What Are the Symptoms of Air Leakage in the Brake Air Pump?

Does Jianghuai Automobile have new energy vehicles?

How deep can the BYD Qin hybrid wade through water?

Can You Drive When Water Submerges the Exhaust Pipe?

What are the causes of brake dragging?

Why can't the BYD G6 start with one-button ignition?

What are the differences between the BYD Qin Travel Edition and the standard version?

How Long Does It Take to Get a Driver's License for an Automatic Transmission Car?

Where is the engine air intake of the Tayron located?