What is the method for replacing the air conditioning filter in the Qashqai?

1 Answers
NorahAnn
07/30/25 1:55am
The method for replacing the air conditioning filter in the Qashqai: 1. Remove the decorative panel on the right side of the driver's seat; it is easier to start from the top and work downwards. 2. The filter cover is connected to a gray sealing sponge, with a handle in the middle. The bottom of the cover has a clip; use your finger to pull it, and the cover will come off. 3. Once the cover is removed, you can pull out the air conditioning filter. Note that the filter has a front and back side. Apart from the original filter, which has markings indicating the front and back, other filters will have a thin extra material on the short edge of the frame. The correct installation direction is with this extra material on the top of the outward-facing side. 4. Installing the filter is somewhat challenging, mainly due to the awkward position. You can bend the filter towards the front of the car. Once it is fully inserted, pull it back and forth a few times to ensure it is completely in place, then finally reattach the cover. The Qashqai is positioned between a compact SUV and a hatchback, with body dimensions of 4315mm in length, 1783mm in width, and 1606mm in height.
Was this review help?
17
5
Share
More Forum Discussions

How long does it take for the tire pressure warning to activate after a car tire is punctured by a nail?

After a car tire is punctured by a nail, the tire pressure warning will sound when the tire pressure value reaches the alarm range. The duration before the alarm is triggered mainly depends on the size and angle of the nail. If you discover that your tire has been punctured by a nail while driving, it is crucial to address the issue immediately rather than waiting for the alarm to activate before taking action. Tire Pressure Monitoring Warning Light: The tire pressure monitoring warning light is a yellow symbol featuring an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside. When this light illuminates, it indicates abnormal tire pressure. Abnormal tire pressure is generally caused by one of the following three reasons: Abnormal Tire Pressure: The warning typically activates when the tire pressure is below 1.8 bar or above 3.0 bar. In such cases, the tires need to be inspected and the pressure adjusted accordingly. Tire Pressure Monitoring Not Reset: If the tire pressure is not reset after inflating the tires, the tire pressure monitoring system will continue to display the previous data, causing the warning light to illuminate. Simply resetting the tire pressure will resolve this issue. Damaged Tire Pressure Sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. In such cases, the only solution is to replace the sensor with a new one.
4
2
Share

How long does it take to successfully schedule Subject 2?

The review time for Subject 2 scheduling is not strictly regulated, as it depends on the efficiency of the relevant departments and the number of candidates. The fastest review can be completed within three to five days after scheduling the test, while the slowest may be completed just three to five days before the test date. Typically, a text message reminder will be received about three days before the test upon successful scheduling. Precautions for taking Subject 2 on rainy days: Mindset adjustment: The most important factor during a rainy-day test is mindset. If it rains during the test, avoid negative emotions or excessive nervousness. It would be a great pity if months of effort were wasted due to nervousness. Therefore, students must adjust their mindset during the test, maintain an optimistic attitude, and not let the weather affect their performance. Pre-driving preparations: Rearview mirrors can become blurry in the rain, so students must wipe them clean before getting in the car to avoid unclear visibility during the test. Students should also shake off mud and water from their shoes to prevent slipping when stepping on the pedals. Wheels are prone to skidding in the rain, so students should control their speed during the test, driving slightly slower than during regular training. Braking: Brake pads are more likely to skid in the rain, so apply slightly more force than usual when braking. Using the windshield wipers: Generally, not using the wipers does not significantly impact the test. However, it is important to turn on the wipers before stopping at the designated spot on the slope, clear the rainwater from the windshield, then turn them off before preparing to stop at the designated spot.
18
5
Share

Where is the driving test location?

Driving test locations are arranged according to local regulations. Here is some relevant information about driver's licenses: 1. Introduction to driver's licenses: A driver's license, officially known as a motor vehicle driving license, is the legal document required for operating motor vehicles. 2. Classification of driver's licenses: Current driver's licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, and P licenses.
5
3
Share

What Does the Yellow Exclamation Mark Symbol Mean?

When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Faults: A triangle with an exclamation mark inside indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a problem with the transmission or that the transmission lubricant level is below the normal range. The transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark below a horizontal line inside parentheses represents the tire pressure monitoring warning light. This light illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling that a car light has malfunctioned. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. There is also a red exclamation mark inside a circled parenthesis, which represents a warning for the braking system, primarily indicating a brake system malfunction or low brake fluid level. The braking system should be inspected immediately to avoid accidents.
7
1
Share

Is Scratching the Wheel Hub When Removing Tires Unavoidable?

Scratching the wheel hub when removing tires can be avoided. Techniques to avoid scratches: When replacing tires, it is possible to prevent the wheel rim from being scratched. When using a tire changer to replace tires, technicians usually apply special lubricant on both the wheel rim and the tire. This not only protects the wheel rim and tire but also effectively prevents scratches. The importance of tires: Tires are a crucial component of a car, being the only part that comes into direct contact with the ground. They are essential for the vehicle's driving stability and safety. As rubber products, tires age over time with prolonged use, which is why they need to be replaced regularly.
11
4
Share

What are the phenomena and causes of crankshaft axial movement noise?

Phenomena and causes of crankshaft axial movement noise can be divided into two situations: axial and radial. Axial phenomena and causes: Excessive axial clearance causes vehicle jerking during startup, sometimes accompanied by metallic impact sounds. Diagnosis involves using a pry bar under the vehicle to check for play at the crankshaft pulley. The root cause is typically excessive wear of crankshaft thrust washers requiring replacement. Radial phenomena and causes: Metallic impact sounds and engine vibration occur during acceleration/deceleration. Using a stethoscope (automotive diagnostic stethoscope or 2-3 foot long copper pipe/iron rod), listen near the engine bottom. Subsequent inspection involves checking engine oil for metal particles - 90% probability indicates excessive crankshaft bearing clearance causing abnormal noise. For precise diagnosis under favorable conditions, removing the oil pan provides more accurate assessment.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.