What is the method for replacing the air conditioning filter in the new BMW 5 Series?
3 Answers
BMW new 5 Series replacement air conditioning filter method is: 1. Open the engine compartment cover and locate the position of the air filter; 2. Open the two clips that secure the box cover and remove the air filter box cover; 3. Remove the old air filter and replace it. The BMW new 5 Series belongs to the mid-to-large-sized car category, with body dimensions of: length 5106mm, width 1868mm, height 1500mm, wheelbase of 3105mm, fuel tank capacity of 68l, and is equipped with a 2.0t turbocharged engine, maximum horsepower of 184ps, maximum power of 135kw, and maximum power speed of 5000 to 6500rpm per minute.
Last time I replaced the air filter for my new 5 Series myself, located behind the glove compartment on the passenger side. After opening the glove box, there are clips on both sides that need to be pressed to remove it, revealing the air filter cover inside. Use a screwdriver to loosen the cover screws, and gently pull to remove the filter. Remember to check the arrow direction on the old filter; the new one should be inserted in the same direction to avoid affecting airflow. The whole process takes about 20 minutes, and wearing gloves is recommended to prevent cuts from metal edges. The original filter is too expensive, so I opted for a Mahle brand filter which offers great value for money. Replacing it every six months is excellent for respiratory health, especially important for families with children.
As someone who has worked with German cars for years, the BMW cabin air filter location is quite well-designed. Just prepare a T20 Torx wrench and kneel on the passenger side floor mat to access it. After opening the glove box, remove the damper rod. There's a small clip on the left side - press it inward to make the entire glove box drop down. The filter housing has upper and lower clips. When pulling out the old filter horizontally, be careful not to spill dust inside the cabin. For the new filter, I recommend choosing one with activated carbon. After installation, test if the air conditioning airflow is normal. This job is much simpler than changing engine oil. Doing it yourself can save 500 yuan in labor costs, enough to buy three new filter sets. Regular replacement also helps prevent air conditioning odor issues.
