What is the method for replacing the air conditioning filter in the 2017 Nissan Qashqai?

2 Answers
DeAlexa
07/29/25 4:50am
The method for replacing the air conditioning filter in the 2017 Nissan Qashqai is: 1. Enter the passenger seat and open the glove box; 2. After opening the glove box, remove the two screws inside, then you can see the air conditioning filter; 3. Take out the old air conditioning filter and replace it with a new one. The 2017 Nissan Qashqai is a compact SUV with body dimensions of: length 4384mm, width 1837mm, height 1594mm, wheelbase 2646mm, minimum ground clearance 199mm, and body weight 1358kg. The 2017 Nissan Qashqai is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 117PS, maximum torque of 190Nm, maximum power of 86kW, and is paired with a 6-speed manual transmission.
Was this review help?
4
2
Share
VanDelaney
08/12/25 8:29am
Last year, I replaced the cabin air filter of my 2017 Nissan Qashqai by myself, and the process was actually quite simple. First, open the glove compartment on the passenger side. There are plastic knobs on both the left and right sides inside—just twist them by hand, and the entire glove compartment can be easily removed. Next, you’ll see a rectangular cover behind it, which is the filter housing. There’s a small clip at the top of the cover; press it gently to open. When removing the old filter, be careful not to dirty the car. After purchasing the new filter, remember to install it with the arrow pointing downward, indicating the airflow direction is inward. The whole replacement process takes no more than 10 minutes, requires no professional tools, and is both cost-effective and quick. Regularly changing the filter can reduce AC odors and filter out pollen and dust, which is especially important for people with allergies. It’s recommended to check it every 10,000 km or once a year to maintain fresh cabin air, as this significantly impacts driving comfort.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How Many Steps Are There in Car Polishing?

Car polishing steps: washing the car, grinding, polishing, and mirror restoration. Below is some related knowledge about polishing: 1. Related concepts of polishing: Car polishing is a process in car beauty where polishing is done before waxing, sealing, or coating. This is because sealing or coating must first go through polishing, and only a finely polished car can achieve a mirror-like finish. This is a necessary step for sealing. Without polishing, the car paint will not be smooth, and the sealing will last very briefly, failing to achieve long-term adhesion, making it no different from waxing. Of course, depending on the condition of the car paint, not all three steps of polishing may be necessary. New cars often only require one step of restoration. However, cars that have undergone coarse wax polishing must undergo medium wax polishing, and those that have undergone medium wax polishing must undergo fine wax restoration. 2. The prospects of polishing: Currently, the demand for car polishing is significant, while the supply is somewhat insufficient, especially for companies with core intellectual property rights and high-quality products. The industry as a whole lacks brand effect. During this period of strong demand, the industry's prospects are undoubtedly good. However, maintaining the health, stability, and sustainable development of the industry requires the joint efforts of all companies involved, especially the need to adopt a meticulous R&D spirit, further improve production processes, reduce costs, truly solve customers' practical difficulties, strictly control quality, and provide the most reliable products.
13
2
Share

How Many Days Off Does the DMV Have During National Day?

The DMV has 8 days off during National Day. As a national institution, the DMV strictly follows the national holiday schedule. During the holiday, there will be staff on duty for emergencies. If you need to handle any affairs, you can call in advance for consultation. The holiday duty staff will handle emergencies but will not process general business. The DMV also follows the national statutory holidays for work and leave, so car owners who need to handle related business at the DMV are advised to go on weekdays. The DMV is mainly responsible for handling motor vehicle registration, modification, transfer, mortgage, and deregistration. It also processes applications for motor vehicle driver's licenses, replacements, renewals, inspections, and other related services for motor vehicles and drivers.
14
1
Share

What is the Difference Between a Notice Slip and a Fine Slip?

The differences between a notice slip and a fine slip are as follows: 1. Different names: The full name of the notice slip is 'Irregular Parking Reminder Slip for Motor Vehicles'; the full name of the fine slip is 'Illegal Parking Notice Slip'. 2. Different contents: The notice slip does not necessarily lead to a penalty, as the traffic violation record will be further reviewed by the traffic police, and penalties will be imposed for serious violations; the fine slip includes details such as the license plate number, vehicle color, type, violation time and location, as well as the name or badge number of the issuing officer and the official stamp of the issuing unit. 3. Different issuers: The notice slip is usually issued by auxiliary police officers; the fine slip is typically issued by traffic police officers. 4. Different legal effects: For minor violations recorded on the notice slip, the violation may not be entered into the system, and no action is required if no violation information is found; the fine slip must be dealt with promptly, and failure to do so within 15 days will result in late fees, and the vehicle will not pass the annual inspection without resolution.
18
4
Share

Does running a yellow light that turns red midway count as running a red light?

Whether running a yellow light that turns red midway counts as running a red light depends on whether the rear of the vehicle has crossed the line when the red light turns on. If the vehicle has just crossed the line and the driver does not continue to move the vehicle, maintaining the status quo, the traffic management department will not consider it as running the light. There is a three-second transition period between the yellow light turning on and the red light turning on. Electronic police operate 24/7, but they do not capture images when the yellow light is on; they start capturing images only when the red light turns on. If you accidentally run a red light but have already passed the stop line without completely crossing the intersection, the traffic police may revoke the violation based on the following conditions: 1. Stopping at the intersection does not obstruct traffic; 2. It does not affect pedestrians crossing the crosswalk; 3. The vehicle has not completely passed through the intersection. As long as these three conditions are met, stopping after running a red light will not result in a fine.
13
4
Share

How to Reset the Tire Pressure Light on Highlander?

Steps to reset the tire pressure light on Highlander: 1. Before resetting, ensure the tire pressure is restored to the normal level; 2. Restart the engine; 3. Press the tire pressure SET button or drive for a while, and the tire pressure warning light will be eliminated. The Highlander is a vehicle produced by Toyota, a large-size SUV in the Toyota family, featuring a spacious body and innovative, roomy interior. The Highlander measures 4890 mm in length, 1925 mm in width, and 1720 mm in height, with a wheelbase of 2790 mm. It is a benchmark model in the midsize SUV segment, with a front design that includes triangular headlights, a hexagonal angular front grille, an integrated Toyota emblem, fog lights adorned with chrome accents, and a slightly forward-leaning front end, giving the entire front face a three-dimensional and dynamic appearance.
18
4
Share

What are the correct steps for starting a car?

The correct steps for starting a car: 1. Adjust the seat properly after getting in the car. An improper sitting posture can lead to abnormal sensations while driving and cause significant fatigue when controlling the throttle and clutch for extended periods; 2. Start the engine. Generally, observe the indicator lights on the dashboard. If any warning light remains on for a long time, it indicates an abnormality in the corresponding component. Immediately turn off the engine, inspect the vehicle, and restart the engine after resolving the issue; 3. Fully depress the clutch. Use your left foot to press the clutch pedal all the way down. If the clutch pedal is not fully depressed, you may hear a gear grinding noise when shifting or even fail to engage the gear, which can easily damage the transmission gears; 4. Shift into first gear, release the parking brake lever, and observe the surroundings to ensure all conditions for starting are met; 5. Release the clutch. Slowly lift the clutch pedal to find the semi-engagement point, which can be identified through engine sound, vibration, and RPM; 6. Once the clutch engagement point is found, gently press the throttle. The vehicle will slightly vibrate at this point. Then, move your left and right feet in opposite directions: the left foot continues to slowly release the clutch pedal upward, while the right foot gradually presses the throttle pedal downward. The movements should be smooth and gentle.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.