What is the method for removing the tail lights of a Nissan Tiida?
2 Answers
The method for removing the tail lights of a Nissan Tiida is as follows: 1. Open the trunk and turn off the power; 2. Insert a screwdriver into the gap of the tail light dust cover and pry it open; 3. Use a socket wrench to remove the exposed screws, then pull out the tail light with force. Taking the 2021 Nissan Tiida as an example, it is a compact car with body dimensions of 4393mm in length, 1766mm in width, 1539mm in height, and a wheelbase of 2700mm. The curb weight is 1180kg. The 2021 Nissan Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum torque of 155Nm, and a maximum power of 96kW. It is paired with a 5-speed manual transmission.
The method for removing the Nissan Tiida taillight is actually quite simple. As a car owner who often performs DIY maintenance, I’d like to share my experience. After opening the trunk, you’ll see a plastic cover on the inner side of the taillight. Use a Phillips screwdriver to remove the two or three fixing screws—the exact number depends on the model year. Then, gently pull off the plastic cover to expose the wiring connector. Carefully pry open the connector’s clip with a flathead screwdriver, avoiding forceful pulling to prevent wire damage. Next, hold the light assembly and pull it outward gently to remove it entirely. I recommend disconnecting the battery’s negative terminal beforehand to avoid electric shock or short circuits. When reinstalling, align the position, insert the connector, and tighten the screws. The whole process takes about ten minutes, making it convenient for bulb replacement or lens cleaning. Remember to wear gloves for hand protection and check for rust on the lamp socket—spray some lubricant to prevent corrosion. This DIY approach is worry-free and cost-effective, saving you a trip to the repair shop.
