What is the method for removing the spare tire of the Baojun 530?

3 Answers
AdamMarie
07/29/25 10:47am
Baojun 530 spare tire removal method: First, remove the trunk partition board. After lifting the partition board, you can see the spare tire and the vehicle tools. Then use a wrench to unscrew the bolts that secure the spare tire. The Baojun 530 is a compact SUV under the Baojun brand. In terms of body dimensions, the Baojun 530 has a length, width, and height of 4695 mm, 1835 mm, and 1750 mm respectively. In terms of power, the Baojun 530 is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 147 hp, a maximum power of 108 kW, a maximum torque of 250 Nm, and a maximum power speed of 5200 rpm.
Was this review help?
15
1
Share
StevenAnn
08/13/25 4:01pm
I have quite some experience in removing the spare tire of the Baojun 530. After turning off the engine, engage the handbrake to ensure the vehicle is stably parked. Open the trunk and locate the spare tire tools in the small storage compartment—usually a metal crank. Get down and look at the central position under the car, where there's a metal bracket holding the spare tire. Align the crank with the fixing bolt and turn it counterclockwise to loosen it slowly. Don’t forget to be careful—the spare tire might weigh several kilograms, and loosening it too abruptly could cause it to drop and hit your hand. After completing the task, remember to check if the bolt is intact; if it’s rusted, add some lubricant to make it easier to remove next time. I usually recommend periodically removing the spare tire to check its air pressure and wear, so it’s ready for emergencies. All in all, this job isn’t difficult—once you get the hang of it, it’s just a matter of minutes.
Was this review help?
11
4
Share
Expand All
VonWalker
10/07/25 7:09am
The first time I removed the spare tire, I was a bit nervous, but the Baojun 530's design is quite user-friendly. The key is not to rush: park the car on level ground, engage the handbrake, find the crank handle in the tool kit, insert it into the bolt hole under the car, and turn it counterclockwise. Maintain even force when loosening, and the spare tire will slowly lower. Beginners often forget to engage the handbrake or work on a slope, which could lead to accidents. The spare tire is incredibly useful—it's essential for emergency rescues. After learning how to do it, I developed a habit of checking the tire pressure monthly. Store the tools properly after use; losing them could affect future operations. The entire process shouldn’t take more than 15 minutes—safety always comes first.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

Can an 18-year-old obtain a B2 driver's license?

No, according to Article 12 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' applicants for the large truck (B2) driving category must be at least 20 years old. Here is some relevant information about the B2 license: B2: The B2 license allows the holder to drive heavy-duty, medium-duty cargo trucks or large, heavy, and medium-sized special-purpose vehicles. Heavy-duty and medium-duty cargo trucks are mainly trucks, such as the large dump trucks commonly seen on roads, which fall under the category of heavy-duty trucks. Special-purpose vehicles: Large, heavy, and medium-sized special-purpose vehicles refer to vehicles equipped with specialized devices or equipment, such as water sprinklers, concrete mixer trucks, fire trucks, etc.
8
5
Share

What items are required for Subject 3 test?

An ID card is required. Below is relevant information: Users only need to bring their ID card for queuing and entering the examination site, as well as for vehicle verification. No other materials are required, except for Subject 4 when additional documents will be needed. A valid original ID card or a valid original temporary ID card is mandatory. For those applying for a driver's license outside their registered residence, a valid original local residence permit must also be carried. Additional information: Exam challenges: Speed and gear mismatch: Errors related to high gear at low speed or low gear at high speed should be noted during the test. Straight-line driving deviation: Many trainees intentionally slow down due to concerns about not driving in a straight line, which is not advisable during the driving process.
7
3
Share

Why does the speedometer of the Xiali N5 not move?

It is necessary to troubleshoot to determine the actual cause of the fault. Possible causes of the fault include: Damaged speed sensor; Broken wiring at the transmission; Grounding fault; The clip at the connection between the odometer and the transmission is loose. Composition of the speedometer: The speedometer consists of two gauges: the speed gauge and the odometer. The odometer is a digital instrument that calculates rotation by engaging the components on the calculator's gear. It mainly obtains mileage signals from the speed sensor and can retain data even without power. There are usually two manifestations when the speedometer does not move: one is when the needle stays at the 0 position and does not move, which is usually caused by internal wiring disconnection or short circuit. The other is when the needle stays at the high position and does not move, commonly known as "running off the dial," which can be resolved by readjusting it. If it is found that the needle does not move at the 0 position and the mileage number does not change, it indicates a speed sensor fault or a wiring fault between the instrument and the sensor.
10
0
Share

How to Deal with Stickers on a Car?

Ensure that the cleaner used on the car body is specifically designed for car washing. If no cleaner is available, washing the car body with detergent diluted in water is also acceptable. Shake the cleaner well before use, then spray it vertically on the water stain areas of the vehicle. After spraying, let it sit for a while to allow the cleaner to fully penetrate the water stains. Use a clean cloth to wipe the water stain areas of the car body back and forth.
7
5
Share

What Lights to Use When Driving Closely Behind Another Vehicle at Night?

Low beam headlights. Low beam headlights are designed for close-range illumination, with design requirements focusing on a wide coverage area of approximately 160 degrees, short projection distance, and non-adjustable focus. Below is relevant information: Article 48 of the Road Traffic Safety Law stipulates that on roads without central barriers or center lines, drivers must switch to low beams when meeting an oncoming vehicle at a distance of more than 150 meters at night, and must use low beams when encountering non-motor vehicles on narrow roads or bridges. When driving at night on roads without streetlights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, vehicles traveling in the same direction and following closely behind another vehicle should use low beams. Additionally, when passing through sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, drivers should alternately use high and low beams to signal.
6
5
Share

Will running a red light on national highways generally be captured?

Running a red light on national highways is generally captured. Criteria for determining a red light violation: Electronic monitoring devices capture three photos as evidence for a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation. How to avoid running a red light while driving: When there are arrow signals, follow the arrow lights; otherwise, follow the circular lights; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just starts flashing, if you are close and moving fast, you should proceed, as braking might not stop you in time to avoid crossing the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line or approach an intersection.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.