What is the method for removing the rear seat of the Changan CS35?
4 Answers
The method for removing the rear seat of the Changan CS35 is: 1. Park the car in a safe location; 2. Enter the rear seat, locate and remove the plastic protective cover under the rear seat; 3. Use a wrench to unscrew the bolts under the plastic protective cover; 4. Remove the rear seat, and the disassembly is complete. Taking the 2017 Changan CS35 as an example, it is a compact SUV with body dimensions of: length 4170mm, width 1810mm, height 1670mm, and a wheelbase of 2560mm. The 2017 Changan CS35 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, producing a maximum horsepower of 125PS, maximum power of 92kW, maximum torque of 160Nm, and is paired with a 5-speed manual transmission.
When I used to drive the Changan CS35, I removed the rear seats, and the steps were quite simple. First, sit in the back row and locate the release handle at the bottom of the seat, usually near the connection point between the two seats—just pull it to release. Second, lift the front part of the seat upward with force. If it feels stuck, don’t yank it; check for any hidden bolts. The Changan CS35 mainly relies on clips for fixation. Third, once the entire seat is lifted out, set it aside, and you’ll have clear access to the cabin floor, making cleaning easier. During the process, small tools like a screwdriver might help pry open the clips, but be gentle to avoid scratching the interior. Remember, when reinstalling, align the clips properly and press firmly until you hear a click, ensuring stability. The whole process isn’t complicated—a beginner can finish it within 10 minutes. However, if the seat feels too tight, it’s best not to force it to avoid damaging parts. Removing the seats has many benefits, such as cleaning the carpet or checking wiring, giving the car’s interior a fresh and tidy look.
When removing the rear seats of the Changan CS35, I believe safety should be the top priority. Before operation, ensure the vehicle is parked with the handbrake engaged and power turned off to prevent short circuits. The procedure involves first checking for small pull rings on both sides at the bottom of the seat. Pull them and then push the front part of the seat upwards, lifting it slowly. If the clips are too tight, you can use a thin plastic sheet to assist in prying them open—avoid using metal to prevent scratches. After completion, don’t forget to check the condition of the clips and bolts; replace any that are loose or worn out promptly. This method is suitable for various cleaning or maintenance scenarios, but if you're not skilled, it’s best to seek professional assistance. During routine maintenance, you can also remove the seats to wipe away dust underneath, extending their lifespan. The entire process isn’t too labor-intensive if done carefully, but forcing it may cause seat deformation and compromise safety.
Removing the rear seats of the Changan CS35 is not difficult. Simply feel around the front lower part of the seat to locate the hidden handle or button. Pull it out, then lift the seat upwards to release the fasteners. If no obvious pull ring is found, check the seat gaps or manually lift the front section. Pay attention to the type of fasteners to avoid damage from excessive force. Once removed, cleaning the floor or installing accessories becomes convenient. Keep movements gentle to prevent accidents.
