What is the method for removing the reading light in the 10th-generation Civic?

How long does it take to fully charge the car battery after starting the engine?

The car engine needs to maintain a speed of over 2000 RPM, and it generally takes at least 4 hours of driving to fully charge the battery. The alternator in the car requires a speed of over 2000 RPM to operate at full capacity, at which point the power generation reaches the nominal value indicated on the nameplate. If the engine speed does not reach 2000 RPM, the charging time will be even longer. Here are some methods to determine if the battery is fully charged, such as observing the indicator eye turning green: 1. A large number of bubbles appear in the battery, indicating a "boiling" phenomenon. 2. The terminal voltage rises to the maximum value and does not increase further for two hours. 3. The electrolyte level rises to the highest position and does not increase further for two hours.

16

1

Share

What is the reason for the simultaneous illumination of the Volkswagen EPC and engine lights?

Volkswagen EPC and engine lights illuminate simultaneously because the EPC detects a system malfunction. Below are the specific details: EPC detects a system malfunction: When the EPC detects a system malfunction, it indicates an issue with the engine throttle adjustment system or the engine system itself. Common reasons for the fault light to illuminate include excessive carbon buildup in the throttle body, engine misfires or cylinder failures affecting throttle operation, air leaks behind the throttle body, or abnormal readings from the intake pressure sensor. Correct actions when both EPC and engine lights are on: If both the EPC and engine lights illuminate while driving, it indicates a fault in the engine system. You should immediately stop the vehicle for inspection or take it to a professional repair shop for diagnosis and repair. It is recommended to perform regular maintenance within the specified intervals rather than waiting for warning lights or issues to arise during driving.

3

2

Share

What Causes the Engine Yellow Light to Illuminate While Driving?

Here are the reasons why the engine yellow light illuminates while driving: 1. The gasoline used may be of poor quality or there may be excessive engine carbon buildup, leading to poor combustion conditions in the engine, which can trigger the warning light. In such cases, it is important to promptly inspect the engine and seek maintenance at the nearest vehicle repair shop. 2. A malfunction in the engine's oxygen sensor often causes the engine warning light to illuminate yellow. This usually does not affect normal driving, but it is advisable to check the reason for the warning light after driving. 3. Issues such as clogged fuel injectors or carbon buildup on the intake valves can trigger the warning light. These problems are often related to the quality of gasoline used or dust entering the engine during maintenance.

17

2

Share

What to Do If Your Driver's License Points Are Deducted to 12?

Here are the steps to take when your driver's license points are deducted to 12: 1. Within 15 days, you should go to the traffic management department of the public security organ where the motor vehicle driver's license was issued or where the violation occurred to participate in a 7-day study of road traffic safety laws, regulations, and related knowledge. 2. After completing the study, the vehicle management office should conduct a test on road traffic safety laws, regulations, and related knowledge for the violator within 20 days. 3. If the test is passed, the points will be cleared, and the motor vehicle driver's license will be returned. 4. If the test is not passed, continue to participate in the study and take the test again. 5. If you refuse to participate in the study or take the test, the traffic management department of the public security organ will announce the suspension of your motor vehicle driver's license.

15

4

Share

What Documents Are Required for Driving with Temporary License Plates?

Temporary license plates require carrying the original vehicle invoice and certificate of conformity for inspection, along with a valid driver's license. The temporary plates must also be within their validity period. Below is relevant information about temporary license plates: Purpose of Temporary License Plates: Temporary license plates serve as transitional plates for vehicle owners before obtaining official ones. During this period, driving on the road requires the use of temporary plates, which hold the same legal effect as official plates. They become void once official plates are acquired. Materials Needed for Applying for Temporary License Plates: To apply for temporary license plates, you need to prepare the following: the buyer's ID card, purchase invoice, copy of compulsory traffic insurance policy, and the vehicle's factory certificate of conformity. Photocopies of these four documents must also be provided. For imported vehicles, additional import certification documents and their photocopies are required. If applying through a proxy, the proxy's original ID card and photocopy must also be submitted.

20

3

Share

How to Clean Carbon Deposits in Sedans?

Here are the methods for cleaning carbon deposits: 1. Using an engine carbon cleaning kit. Hang a bottle tool above the engine, pour the cleaning agent into it, and then introduce the agent into the engine through a conduit to achieve the effect of cleaning carbon deposits. If the engine has severe carbon buildup, this method may cause blockage or damage to the catalytic converter system. 2. Machine cleaning. Inject the cleaning agent into a machine, then pressurize it into the combustion chamber to allow the agent to react with and dissolve the carbon deposits, and finally extract the waste liquid. This method is quite effective for severe carbon buildup and does not require engine disassembly, but it is more expensive, and an oil change is needed after cleaning. 3. Engine disassembly cleaning. This is the most effective method. The entire engine is disassembled, and cleaning agents or ultrasonic methods are used to completely and thoroughly remove carbon deposits from the components. However, it requires a significant amount of time and effort, making it the most expensive option.

7

3

Share

What is the method for removing the reading light in the 10th-generation Civic?

How long does it take to fully charge the car battery after starting the engine?

What is the reason for the simultaneous illumination of the Volkswagen EPC and engine lights?

What Causes the Engine Yellow Light to Illuminate While Driving?

What to Do If Your Driver's License Points Are Deducted to 12?

What Documents Are Required for Driving with Temporary License Plates?

How to Clean Carbon Deposits in Sedans?

How many multiple-choice questions are there in Subject 4?

Do You Have to Take All 16 Items in Subject 3?

What are the corresponding speeds for the 5 gears?

Is a 6-speed manual-automatic transmission an AT transmission?