What is the method for removing the headlights of a Hyundai Elantra?

1 Answers
LeJosiah
07/24/25 5:26pm
The method for removing the headlights of a Hyundai Elantra is as follows: 1. Disconnect the power plug of the bulb, turn off the engine for more than 5 minutes, remove the car key, wait for the engine to cool down completely, and then open the engine compartment cover; 2. After opening the engine compartment cover, you can see the dust cover behind the headlight assembly. The dust cover is mostly made of rubber and can be unscrewed directly along the threaded direction; 3. After removing the dust cover, you can see the bulb base inside the headlight assembly. Pinch the wire clip next to the base, and once the clip is released, you can remove the bulb. The Hyundai Elantra was previously known as the Avante. In terms of interior, the Elantra's dashboard features a design tilted towards the driver's side, equipped with a new dual-dial instrument panel, a new-style three-spoke multifunction steering wheel, an 8-inch central control display, and an independent air conditioning status display.
Was this review help?
3
5
Share
More Forum Discussions

How to Activate the Automatic Window Closing Feature by Long-Pressing the Lock Button?

The method to activate the automatic window closing feature by long-pressing the lock button is: 1. Locate the electric window button on the driver's door; 2. Lightly lift or press the window switch until the window is fully open, then press the switch again until the window is fully closed. After the window is closed, lightly pull the button for 2 seconds to complete the setup. To prevent the owner from forgetting to close the windows after leaving the car, an automatic window closer can be used. There are three types of window closers: 1. Time-controlled automatic window closer; 2. Program-controlled automatic window closer, with basic functions and control principles similar to the time-controlled type; 3. Intelligent window closing system, mainly through electronic module combinations to achieve automatic window closing.
17
5
Share

Why does the car stall when braking in second gear while turning?

The reason the car stalls when braking in second gear while turning is: the brake is applied too suddenly and too hard, which causes the speed to drop too low, leading to the car stalling and causing severe jerking. When preparing to enter a turn, it is necessary to control the speed in advance by braking first and then decelerating. For wide turns, reduce speed slightly, while for sharp turns, decelerate quickly. When turning in congested areas, shift into first or second gear, lightly press the clutch, and use the car's idle speed to turn, while keeping your foot on the brake to avoid emergencies. Always signal your turn in advance and try to stay on the left side of the road to provide convenience for vehicles behind and those turning right.
16
0
Share

What is the suitable tire pressure for the Wuling Hongguang 7-seater?

The suitable tire pressure for the Wuling Hongguang 7-seater is between 2.3 and 2.8 bar. Tire pressure is not only related to driving comfort but also to driving safety. Excessive tire pressure will reduce the friction and adhesion of the tires and may also lead to the risk of a tire blowout, affecting driving safety. Insufficient tire pressure can cause steering difficulties and deviation, which are unfavorable for driving safety, and can also damage the tires. Excessive rolling can cause the tires to overheat, leading to a blowout. The Wuling Hongguang has a length, width, and height of 4720mm, 1840mm, and 1810mm respectively, with a wheelbase of 2800mm and front and rear track widths of 1606mm. The fuel tank capacity of the Wuling Hongguang is 53L, with a maximum horsepower of 147. The front suspension is a MacPherson independent suspension, and the rear suspension is a semi-independent suspension with spiral springs and five links.
3
5
Share

Do I still need an annual inspection if I have a six-year exemption?

An annual inspection is still required. The six-year exemption refers to exemption from on-site vehicle testing, not exemption from the annual inspection itself. Eligible vehicles under the six-year exemption policy are exempt from the on-site testing process (i.e., vehicle inspection), but owners must still apply for the annual inspection decal (the sticker placed on the windshield) every two years. In other words, the exemption only removes the vehicle inspection step, while the annual inspection decal must still be renewed biennially. For passenger cars, the first annual inspection is conducted when the vehicle reaches six years of age. Non-commercial small and micro passenger vehicles, including family cars older than six years but less than 10 years, require an inspection every two years. For vehicles exactly six years old, the owner must drive the vehicle to an inspection station with their ID card, vehicle registration certificate, vehicle and vessel tax or tax exemption certificate, and compulsory traffic insurance policy. After passing the inspection, a certificate will be issued, which, along with the submitted documents, must be presented at the relevant counter to obtain the annual inspection decal.
3
0
Share

Which generation is the 2014 Haval H6?

The 2014 Haval H6 is the third generation. More details about the Haval H6 are as follows: 1. Introduction to the Haval H6: The Haval H6 is the flagship model of the Haval brand. On August 25, 2011, the Haval H6, positioned as an urban intelligent SUV, was grandly launched at the Great Wall Motors Tianjin new factory. It offers Mitsubishi 2.0L gasoline-powered models and Green Power 2.0T diesel models, divided into three versions: Urban, Elite, and Premium. 2. Design evolution of the Haval H6: After three generations of glorious evolution, the third-generation Haval H6 boasts a powerful presence. With an Eastern-style futuristic aesthetic design language, its exterior lines fully showcase a strong sense of dynamic power. Meanwhile, the interior adopts a super-sensory futuristic smart cockpit design. 3. Intelligent evolution of the Haval H6: With thousands of intelligent upgrades, it integrates cutting-edge smart technologies. It not only supports full-vehicle FOTA upgrades but also features ultra-L2-level autonomous driving, including 22 intelligent driving assistance functions such as full-scenario AEB automatic emergency braking, 50-meter fully automatic trace reverse, and intelligent evasion.
2
0
Share

Does the New Baojun RS3 have fog lights?

There are no front fog lights. The original lights of the New Baojun RS3 have low brightness, a small light angle, and relatively large blind spots. 1. Fog light description: The front fog light has three diagonal lines on the left, crossed by a curved line, and a semi-oval shape on the right; the rear fog light has a semi-oval shape on the left and three horizontal lines on the right, crossed by a curved line. Generally, the fog light switch is located on the left rear or left side of the steering wheel and has a prominent identifier to alert the user. 2. Introduction to fog lights: As the name suggests, they are light signals used in rainy or foggy weather. Their main characteristic is strong penetration in fog, making it easier for vehicles or pedestrians to notice them early in low-visibility weather, thereby effectively preventing accidents. When fog lights are turned on, they can significantly interfere with the vision of other drivers, especially in environments with good visibility, as they can be very dazzling and may even cause harm to the driver's eyes.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.