What is the method for removing the buzzer on the Wuling Hongguang Mini?
3 Answers
The buzzer serves a warning function and is an integrated electronic sound device powered by DC voltage. Below are the steps to remove the buzzer on the Wuling Hongguang Mini: 1. First, turn off the power to the electric vehicle. 2. Unscrew the screws around the seat cushion and remove it to expose the battery and internal wiring. 3. Then, pull out the wiring to locate the buzzer, which is typically a round black device. Trace the buzzer's wiring to find its connector. 4. Wrap the connector with insulating tape to prevent electric leakage. Once separated, the alarm can be deactivated.
My experience in removing the Wuling Hongguang MINI buzzer is to first ensure the vehicle is turned off and parked in a safe location. Then disconnect the negative terminal of the battery to prevent electric shock, which is crucial. Use a screwdriver to slowly pry open the interior panel under the steering wheel to reveal the buzzer's mounting position. I usually use small pliers to gently unplug the wire connector, then loosen the mounting screws to remove the part. The whole process takes about 20 minutes, and you must be careful not to break the plastic clips, otherwise, it will take extra time to repair. Actually, many people remove the buzzer because it's too noisy, especially the beeping sound when reversing is annoying. I recommend checking the surrounding wiring for aging while you're at it to extend the battery life. Doing small maintenance tasks like this on your own car usually saves money, but it's also good to prepare some spare parts in case of accidental damage.
The first time I removed the buzzer from my Wuling Hongguang MINI, I was quite nervous. I carefully read the user manual to locate its position under the dashboard area. Then, I prepared basic tools like a Phillips screwdriver and a hex key, and proceeded step by step: turned off the ignition, lifted the hood to disconnect the battery's negative terminal, ensured safety, and then gently removed the interior panel in the cabin. After locating the buzzer, I steadily unplugged the wire connector to avoid breaking the wires, then unscrewed and removed it. The whole process requires caution to avoid scratching hands or panels—I once made the mistake of applying too much force, causing a plastic clip to crack, but replacing the part later fixed it. Learning this skill saved me money on repair shops and enabled me to handle similar components like alarm noise issues myself, fostering a DIY habit.
