What is the method for pulling over to the side of the road?
4 Answers
The method for pulling over to the side of the road: First, before pulling over, confirm whether the roadside conditions allow parking, turn on the right turn signal, lightly tap the brakes, slow down the speed, and gradually turn the steering wheel to the right at a small angle; approach the right curb at a small angle, and when the car body is close to the curb, straighten the steering wheel; when preparing to stop, the speed must be slow to prevent accidents. Once the car has come to a complete stop, shift the gear to neutral, pull up the handbrake, and at this point, pulling over to the side is complete. Things to note when pulling over: 1. Before the car comes to a complete stop, do not open the door to let people in or out; 2. When temporarily parking on the right side, the driver must not leave the vehicle immediately and should quickly drive away if obstructing traffic; 3. Do not park at intersections, railway crossings, curves, narrow roads, narrow bridges, steep slopes, tunnels, or within 20 meters of these locations.
As someone who has been driving for many years, I always pull over cautiously. First, I check the rearview mirror and blind spots for any approaching vehicles or pedestrians. If everything is clear, I turn on the right turn signal to alert those behind me, then gradually reduce the speed to nearly a stop, gently applying the brakes to avoid sudden stops that could cause trouble. I choose a flat and open space to park, making sure not to block fire hydrants or intersections. Once parked, I shift to neutral, engage the handbrake, turn off the engine and lights, and then exit the vehicle. The entire process should be steady and calm—safety first—to avoid accidents. I also make sure not to park too close to crosswalks to avoid obstructing pedestrians. Developing these habits ensures smooth and safe parking.
When I was a novice driver, I used to be nervous about parking. Now I understand that pulling over must be done step by step. Turn on the right signal light and start slowing down 50 meters in advance, while turning your head to check blind spots for bicycles. After confirming safety, gently steer right towards the curb, leaving 30 cm of space to avoid scraping it. After parking, press the brake, shift to P, engage the handbrake, and turn off the engine. Finally, turn off the lights to avoid wasting power. My common mistakes were stopping too abruptly or failing to check blind spots, nearly hitting pedestrians, so practicing slow maneuvers is key.
When pulling over, I always signal with the turn indicator first to alert others, then gradually slow down and move to the right when the view is clear. After stopping, I engage the handbrake and turn off the lights. Be sure to choose a safe spot that doesn't disrupt traffic, like avoiding curves or areas near bus stops. Extra caution is needed when driving in the city—don't block bike lanes or sidewalks.
