···
Log in / Register

What is the method for extracting gasoline from a car?

3 Answers
AmeliaLynn
07/29/25 9:00pm
The method for extracting gasoline from a car is: 1. Open the engine hood and locate the fuel line connecting the engine to the fuel tank; 2. After removing the fuel line, connect a plastic tube to a container; 3. Open the vehicle's relay box and unplug the fuel pump relay; 4. Connect wires to the relay socket; 5. Insert the key into the ignition switch and turn it to the ON position to start siphoning the fuel. The working principle of extracting gasoline from a car is: The power unit provides power, which is converted from high-speed operation to low-speed operation of the oil pump crank through a reducer. The crank, connecting rod, and walking beam mechanism then convert the rotational motion into reciprocating motion of the oil pump, driving the piston in the oil pump to extract crude oil.
Was this review help?
4
2
Share
SanKhloe
08/15/25 6:54pm
To extract gasoline from a car, I always keep a hand-operated pump tool handy—it's simple and safe to use. First, find a spacious and well-ventilated area, ensuring the car is turned off with no open flames or sparks nearby. Prepare a gasoline-specific hose and a clean container. After unscrewing the fuel tank cap, slowly insert the hose and start pumping the handle—the gasoline will flow through the hose into the container. This method is effortless and affordable, with a full set costing just a few dozen yuan on Taobao, making it ideal for draining old fuel for replacement or storage. Remember to wear gloves and a mask throughout the process, as gasoline is highly volatile—avoid inhaling too much. Don’t dump the extracted fuel on the roadside to avoid pollution; take it to a waste oil recycling station. The whole process takes about 20 minutes, and you’ll get the hang of it after a few tries, though beginners should have a friend supervise. Clean the tools after each use to prevent residue buildup—this ensures efficiency and environmental responsibility.
Was this review help?
9
4
Share
Expand All
DiLiam
10/16/25 7:52am
When extracting gasoline, I prioritize safety and environmental protection, and recommend the siphon method as it's simpler. Insert a transparent plastic hose gently into the fuel tank, place the other end into a metal container, and give it a strong suck to start the flow—but never swallow! Alternatively, using your mouth through gauze is safer. Always operate in an open space to avoid vapor accumulation and wear goggles for eye protection. Gasoline is toxic—never dispose of it carelessly. Store it in sealed containers and take it to recycling points to minimize pollution. I personally only use this method when accidentally refueling with lower-octane gas, and gravity drainage is even safer. A tip: check the weather forecast to ensure no rain during the process, reducing the risk of gasoline moisture degradation. Patience is key, and beginners will get the hang of it after a few tries. Safety first, respect nature.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What documents are required for the first maintenance of Haval H6?

The items required for the first maintenance include: driver's license; maintenance manual; vehicle registration certificate; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance institution for the vehicle's first maintenance. The precautions are: make an appointment with the 4S store in advance. The first maintenance refers to the initial maintenance after the new car is driven, and the specific time varies from car to car, generally after driving 1000 to 3000 kilometers. The car needs to participate in the first maintenance in time, neither in advance nor delayed. The realization of the first maintenance marks the end of the running-in period of the car, and it can be driven according to the standard load and normal speed required by the car. The time for the first maintenance is calculated according to the date of picking up the car. There are two indicator values for the first maintenance time: mileage and time. Whichever indicator is met first, that indicator shall prevail. The first maintenance items include: changing the engine oil, oil filter, cleaning the air filter, checking whether the levels of various oils are normal, checking whether the generator belt and wiper blades are damaged, checking whether the tire pressure is normal, checking whether the tires are damaged, bulging, etc. Time required: It takes about 2 hours to complete all the work. The most important thing for the first maintenance of a new car is to change the engine oil and oil filter. When changing the engine oil, the oil filter must be replaced together, and the selection of engine oil must refer to the "Vehicle Use and Maintenance Manual", as different models specify the use of different engine oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people will tidy up and clean the car by themselves during holidays, rinsing the body with water and scrubbing with a cloth. Here, it needs to be reminded that the interior of the car body does not need to be directly rinsed with water. If the floor mats are dirty, you can use a vacuum cleaner, or take them out, brush and wash them with detergent, dry them, and then put them back. There are many through holes in the grooves under the rubber mats on the floor of the cab. After water enters, it will not dry by air, but will flow through the through holes to parts such as the gearbox for erosion and corrosion. The good practice is to clean with a vacuum cleaner and then scrub with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is in short supply, it is recommended that you drain the antifreeze as soon as possible and add the same brand of antifreeze from the beginning. Because the brands of antifreeze are different, their chemical functions are also very different. Various functional preservatives will corrode other functional preservatives. Different brands of antifreeze use different preservatives. Do not mix them to avoid unnecessary trouble. Do not lubricate the tire bolts and nuts: When the bolts of the running car are rusty, they are usually oiled so that they can work normally again. In order to prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to the bolts and nuts, but this brings necessary risks to safe driving. When the car is driving at high speed, the bolts and nuts are simply lifted or even dropped, leading to driving failure. When promoting the EFI car, do not step on the accelerator: The promoter of the EFI car is different from that of ordinary cars, and its fuel injection control device can actively adjust the fuel supply according to the temperature and working conditions of the promoter, making the promoter promote smoothly.
17
2
Share

Can a Vehicle Pass Annual Inspection After an Engine Replacement?

Replacing an engine can pass annual inspection, but it requires completing a modification registration. Vehicles with completed modification registration can undergo normal inspection. Below are the specific details about vehicle annual inspection: 1. Meaning of Annual Inspection: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle according to the 'Safety Technical Conditions for Motor Vehicle Operation.' 2. Exemption Policy: Non-commercial small private passenger vehicles with 7 seats or fewer (including 7 seats) are exempt from on-site inspection for the first 6 years. However, the owner still needs to pass an exhaust emission test within the specified period (usually 2 years) and apply for an inspection compliance mark at the vehicle management office, motor vehicle registration service station, or traffic police squadron, which must be affixed to the upper right corner of the vehicle's front windshield.
18
0
Share

What are the differences between Tucson and ix35?

The differences between Tucson and ix35 are as follows: 1. In terms of configuration: In exterior configurations, the Tucson only has one additional feature compared to the Hyundai ix35 - a panoramic sunroof. In safety configurations, the Hyundai ix35 offers more features including front and rear head airbags, tire pressure monitoring system, lane departure warning, active braking, and fatigue driving reminder. In terms of control configurations, the Hyundai ix35 is equipped with front parking radar and cruise control. 2. Powertrain: The ix35 is definitely at a disadvantage compared to the Tucson in terms of powertrain options. Currently, the ix35 is only equipped with a 2.0L naturally aspirated engine. In contrast, the Tucson is powered by a 1.6T turbocharged engine, which delivers superior performance and driving pleasure both in terms of specifications and daily use compared to the ix35.
12
5
Share

How long before the driver's license expires can it be renewed?

Driver's license renewal can be processed three months in advance, that is, within 90 days before the expiration date. Below are the relevant considerations for driver's license renewal: 1. Handle traffic violations: Before renewal, ensure all traffic violations are settled, fines paid, and points cleared; otherwise, the vehicle management office will not issue the renewal. 2. Accumulating 12 points within the validity period: If during the validity period of the driver's license, any scoring cycle accumulates 12 points, a longer validity period license cannot be issued. 3. Expiration period: If the driver's license expires less than a year ago, renewal can still be processed through the normal procedure; if the license expires between one to three years, it will be canceled, but renewal can still be processed by passing the subject one test; if it expires more than three years ago, the license becomes void and cannot be renewed.
6
5
Share

What does the load index of a tire mean?

The load index of a tire refers to the load capacity indicator, which is a numerical code representing the maximum load a tire can bear under specified usage conditions. The load index ranges from 70 to 109, corresponding to maximum load capacities from 335 to 1030 kg. Exceeding the tire's maximum load capacity won't cause immediate damage, but prolonged overloading can lead to tire fatigue, shorten its service life, and in severe cases, may result in a blowout. Tires are circular elastic rubber products mounted on metal rims, designed to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance.
19
1
Share

What Causes the Brake Light to Illuminate on a Hyundai Verna?

The reasons for the brake light illuminating on a Hyundai Verna are: 1. Lack of brake fluid; 2. Damaged taillight bulb; 3. Severely worn brake pads. The brake light is installed at the rear of the vehicle, with a main color of red, enhancing the penetration of the light source so that vehicles behind can detect the vehicle ahead under low visibility conditions, thereby helping to prevent rear-end collisions. Taking the 2020 Hyundai Verna as an example, it belongs to the compact car category, with body dimensions of: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, a fuel tank capacity of 43l, and a curb weight of 990kg.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.