What is the method for extracting gasoline from a car?

1 Answers
MacJade
07/24/25 5:57pm
Method for extracting gasoline from a car: 1. Open the engine hood and locate the gasoline pipe connecting the engine to the fuel tank; 2. After removing the gasoline pipe, connect a plastic tube to a container; 3. Open the vehicle's relay box and unplug the fuel pump relay; 4. Connect wires to the relay socket; 5. Insert the key into the ignition switch and turn it to the 'on' position. The principle of extracting gasoline from a car is: the power machine provides power, the reducer converts the high-speed operation of the power machine into the low-speed operation of the oil pump crank, and the crank, connecting rod, and walking beam mechanism convert the rotational motion into the reciprocating motion of the oil pump, driving the piston in the oil pump to extract crude oil.
Was this review help?
15
0
Share
More Forum Discussions

What are the symptoms of a faulty crankcase ventilation valve?

The symptoms of a faulty crankcase ventilation valve are: 1. Contamination of the engine oil in the crankcase; 2. Oil leakage from the oil pan gasket; 3. Unstable engine operation; 4. Abnormal oil consumption; 5. Increased carbon deposits in the intake tract; 6. Changes in intake manifold vacuum and abnormal mixture concentration, immediate repair is recommended. The functions of the crankcase ventilation system are: 1. Preventing oil deterioration; 2. Preventing leakage from the crankshaft oil seal and crankcase gasket; 3. Preventing various oil vapors from polluting the air. The components of the crankcase ventilation system include the ventilation chamber, oil-gas separation system, crankcase pressure control system, oil return chamber, and breather pipe.
1
0
Share

What is the maximum number of seats allowed for a C-class driver's license?

C-class driver's license allows driving vehicles with fewer than 9 seats. According to national regulations: A C1 driver's license can only operate vehicles that are under 6 meters in length, carry no more than 9 passengers, and weigh less than 4.5 tons. Special notes: 1. Some small cars are not covered by C1 license: These cars must not exceed 6 meters in length. 2. Not all blue-plate vehicles can be driven: Not all vehicles with blue license plates qualify as small cars. For C1 license, the total vehicle weight must be under 4.5 tons and passenger capacity must not exceed 9 people. Any vehicle exceeding these specifications falls outside the C1 license scope. 3. C1 license does not permit motorcycle operation: C1 license holders cannot drive motorcycles; a separate motorcycle license is required.
1
1
Share

What material is F11?

F11 is a pearlitic heat-resistant steel forging conforming to American standards. Meaning of F11: The F-11 Fighter (English: F-11 Fighter, nickname: Tiger, also known as F11F) is a fighter aircraft developed by Grumman Corporation of the United States, now retired. The F-11 fighter originated in 1952 when Grumman self-funded research into modifying the design of the F9F-6/7 "Cougar" to comply with the area rule principle. The purpose was to reduce transonic drag and achieve supersonic flight capability. Technical characteristics of F11: The F11 features a cylindrical fuselage with thin, narrow-chord swept mid-wings. The fuselage noticeably narrows at the wing installation position to comply with the area rule. Air intakes are located on both sides of the fuselage, below and to the right of the cockpit.
5
0
Share

Why Can't I Find the Leak When the Antifreeze Is Always Low?

Antifreeze is always low but the leak can't be found, which indicates an internal leakage phenomenon. This refers to the antifreeze leaking into the engine internally, causing a continuous decrease in antifreeze levels without any visible external leak points. The reasons for internal leakage include: 1. Damage to the cylinder head gasket, allowing coolant to enter the oil passages or combustion chamber; 2. Sand holes or fine cracks in the cylinder wall, leading to antifreeze entering the combustion chamber; 3. Damage to the oil or transmission oil cooler; 4. Coolant seeping into the intake tract and flowing into the combustion chamber to burn. The full name of antifreeze is antifreeze coolant, meaning it is a coolant with antifreeze properties. It prevents the coolant from freezing in cold winter conditions when the vehicle is parked, which could otherwise cause the radiator to burst due to expansion or damage the engine cylinder block or head due to freezing.
3
4
Share

Can you change lanes when encountering a yellow dashed line?

When encountering a yellow dashed line, you can change lanes, but you cannot cross a solid line. Below are the relevant explanations: 1. Yellow lines are used to separate traffic moving in opposite directions, while white lines separate different lanes moving in the same direction. If it is a solid line, you cannot cross it. 2. Double solid yellow lines: U-turns, crossing, or speeding around curves are strictly prohibited. Violations will result in a fine and a deduction of 3 points. 3. Double dashed yellow lines: On main roads, left turns are permitted when safe and without obstructing traffic, but U-turns are not allowed. 4. One solid and one dashed yellow line: Vehicles on the dashed side can make U-turns or cross the line when safe and without obstructing traffic, while vehicles on the solid side cannot cross the line or remain on the double yellow lines for an extended period.
12
4
Share

What are the reasons why the vehicle cannot recognize the smart key?

Reasons why the vehicle cannot recognize the smart key: 1. The remote control has no power; 2. There are signal towers or other interference devices nearby; 3. There is a problem with the smart remote system. A smart key is a key that uses infrared signals to open one or two car doors, the trunk, and the fuel tank cap, and can also control the car's windows and sunroof. Smart keys can be divided into two parts: the entry system and the start system, but most keyless entry systems include the start function, with only a few models having the entry function. The smart entry system uses advanced RFID technology. RFID (Radio Frequency Identification) is a non-contact automatic identification technology that automatically identifies target objects and obtains relevant data through radio frequency signals. The identification process does not require manual intervention and can work in various harsh environments.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.