···
Log in / Register

What is the method for driving an automatic transmission car?

4 Answers
DeCarson
08/30/25 6:08am

Driving an automatic transmission car involves the following steps: 1. After sitting in the driver's seat, press the start button directly; 2. Depress the brake pedal and press the start button to ignite and start the engine; 3. Release the foot brake and allow the car to warm up in place; 4. Depress the brake pedal again and shift to D (Drive) gear; 5. Release the handbrake and slowly lift the foot brake to start moving. An automatic transmission car does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on the driving speed and traffic conditions. The gears of an automatic transmission are: 1. P (Park) for parking; 2. R (Reverse) for reversing; 3. N (Neutral) for neutral; 4. D (Drive) for forward driving; 5. S (Sport) for sport mode; 6. L (Low) for low-speed driving.

Was this review help?
20
3
Share
Joan
09/12/25 3:12am

Driving an automatic transmission car is actually quite intuitive, especially for beginners like me. At the beginning, after getting in the car, fasten the seat belt, press the brake pedal, and then start the engine. Then shift to D gear, release the handbrake, and gently lift the foot brake to start the car slowly. At this time, gently press the accelerator to speed up. Usually, pay attention not to shift gears directly when the speed is too fast, and always press the brake before shifting to ensure safety. When parking, press the brake, shift to P gear, pull the handbrake, and turn off the engine. I found that not holding the steering wheel too tightly while driving and keeping relaxed can better avoid accidents. In addition, regularly check the tires and brake system. Although automatic transmission is simple, proper maintenance ensures a longer driving life.

Was this review help?
7
2
Share
Expand All
StEmma
10/26/25 4:01am

I've been driving automatic transmission cars for over a decade, and the driving method is truly worry-free. The first thing after getting in the car is to check the rearview mirrors and adjust the seat properly, then press the brake, start the engine, shift to D gear to get moving. When accelerating, avoid stomping on the gas pedal; easing into it saves more fuel. Use lower gears L or S when going downhill to prevent brake overheating. When parking, first press the brake, shift to N gear, wait for the car to stabilize, then switch to P gear and engage the handbrake—this protects the transmission. Maintain a safe distance while driving and avoid tailgating; using cruise control on highways makes driving more relaxed. After each drive, remember to clean the floor mats to prevent them from interfering with the pedals. These small habits make driving safer and more comfortable.

Was this review help?
11
4
Share
Expand All
McGenesis
12/09/25 4:21am

As an older driver, I find automatic transmission very easy to handle. After getting in the car, sit steadily, press the brake to start, shift to D gear, slowly release the foot brake to begin moving, and gently press the accelerator without rushing. Keep your eyes on the road without distraction while driving, slow down in advance for turns, and maintain a steady speed on the highway. When parking, firmly press the brake, shift to P gear, turn off the engine, and pull the handbrake to ensure it's secured. Automatic transmission eliminates the need for gear shifting, making it particularly suitable for those of us with slower reflexes. Remember to check the dashboard and not ignore warning lights, and reduce speed for safer driving on slippery rainy roads. The driving method is simple, but staying focused is key, and regular car maintenance ensures smoother trips.

Was this review help?
15
0
Share
Expand All
More Forum Discussions

What is the SERES car brand?

SERES is a brand under Chongqing Jinkang SERES Automobile Co., Ltd., which is affiliated with Chongqing Sokon Industrial Group Co., Ltd. In the field of new energy electric vehicles, Jinkang SERES obtained the production qualification from the National Development and Reform Commission in January 2017 and the product qualification from the Ministry of Industry and Information Technology in September 2018, possessing both production and sales qualifications. Jinkang SERES has established a dual layout for new energy electric vehicle manufacturing in both China and the United States, exploring new automotive manufacturing models. Driven by digitalization as the core, it integrates new technologies such as artificial intelligence, the Internet of Things, and cloud computing to truly meet user demands with real-time online responsiveness. SERES models include the SERES SF5, SERES iX3, and SERES SF7. Among them, the SERES SF5 is an extended-range electric mid-size SUV with dimensions of 4700mm in length, 1930mm in width, and 1625mm in height, and a wheelbase of 2875mm. The SERES SF5 is equipped with a 1.5-liter turbocharged engine with a maximum power output of 82kW.
13
0
Share

What is the fuel tank capacity of the Fengon 580?

The Fengon 580 has a total of 12 models, all with a fuel tank capacity of 58 liters. The vehicles are all front-engine, front-wheel drive, with transmissions including a 6-speed manual transmission, 6-speed automatic manual transmission, 5-speed manual transmission, and continuously variable transmission. In the same class, the 2022 Fengxing T5 Shengshi 1.6L manual Zhumeng 5-seater has a fuel tank capacity of 45 liters, while the 2022 Dongfeng Fengshen AX7 Mahe 1.5T manual DF21 has a fuel tank capacity of 60 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates that the fuel is nearly depleted, and when it is near F, it means the fuel level is sufficient.
12
5
Share

How to Use the Remote Start Feature on the Mondeo?

The method for remote starting the Mondeo is as follows: There is a 2X button on the remote key, press it twice to remotely start the vehicle. Below is a detailed explanation of the remote start feature: 1. Remote starting the engine or motor, as the name suggests, means starting the engine or motor remotely via the remote key. 2. The principle is: the vehicle starts the engine or motor based on the signal received from the remote key. This entire process eliminates the inconvenience of manually entering the vehicle to operate it. While the engine or motor is running, the central locking system remains in the locked state, providing effective security. 3. Typically, after remote starting the engine or motor, the vehicle will operate continuously for ten minutes. If no further instructions are received, it will automatically shut off. 4. This method can also help increase the temperature inside the cabin. Since remote starting involves the engine's anti-theft password lock, it is difficult to install this feature afterward. Even if it is installed by modifying the circuit, there may still be certain security risks.
20
0
Share

Can the rear seats of the CRV be laid flat?

Honda CRV rear seats can be laid flat. There are two levers on both sides of the trunk. Pulling them simultaneously can fully recline the rear seats. Below is extended information about Honda CRV seats: 1. Honda CRV rear seats can be folded in a split ratio: Compared to folding the entire rear seat, the split ratio offers greater flexibility. Only half of the backrest can be folded to accommodate large items, while the unfolded part can still seat passengers. 2. Common split ratios include 1/3, 2/3, and 1/2: The 1/3 and 2/3 ratios typically appear in rear seats with three seats, allowing either two seats on one side or one seat on the other side to be folded; the 1/2 ratio usually appears in rear seats with two seats, enabling one of the two seats to be folded. 3. The CRV's seat design is unique: The front seats can be laid flat after removing the headrests, and the rear seats can also be laid flat, serving as a bed when tired from driving.
18
3
Share

What is the emission standard of the Boyue?

2020 Geely Boyue's Zhiya and Zhilian 4G Internet versions both comply with the China VI emission standard. Here is an introduction to the Geely Boyue: 1. In terms of appearance: The new model has not undergone significant changes. The front grille still features the water ripple design, but the new model's taillights have been smoked, enhancing both sportiness and recognition. 2. In terms of power: The new model is equipped with a 1.8T turbocharged engine (model JLE-4G18TDC) and a 7-speed dual-clutch transmission, delivering a maximum power of 184 horsepower and a peak torque of 300 N·m.
5
0
Share

What engine does the Lincoln MKC use?

The Lincoln MKC is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 203 HP and a maximum power output of 149 KW at 5500 rpm, with a peak torque of 381 N.m. The Lincoln MKC is produced by the American Ford Motor Company, one of the United States' industrial monopolies and a significant multinational corporation worldwide. For daily maintenance of the Lincoln MKC's engine, the following methods can be employed: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD to SF grade motor oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB to CD grade diesel oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous residues accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or activate the safety valve, allowing oil to bypass the filter and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear, forming sludge. In small amounts, it remains suspended in the oil, but in large quantities, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates smoothly but also extends the overall lifespan of the radiator and engine.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.